244 research outputs found
Influence of the sodium/proton replacement on the structural, morphological and photocatalytic properties of titanate nanotubes
Titanate nanotubes (TNT) with different sodium contents have been synthesised
using a hydrothermal approach and a swift and highly controllable post-washing
processes. The influence of the sodium/proton replacement on the structural and
morphological characteristics of the prepared materials was analysed. Different
optical behaviour was observed depending on the Na+/H+ samples' content. A band
gap energy of 3.27\pm0.03 eV was estimated for the material with higher sodium
content while a value of 2.81\pm0.02 eV was inferred for the most protonated
material, which therefore exhibits an absorption edge in the near visible
region. The point of zero charge of the materials was determined and the
influence of the sodium content on the adsorption of both cationic and anionic
organic dyes was studied. The photocatalytic performance of the TNT samples was
evaluated in the rhodamine 6G degradation process. Best photodegradation
results were obtained when using the most protonated material as catalyst,
although this material has shown the lowest R6G adsorption capability.Comment: 22 pages, 8 figures, accepted for publication in Journal of
Photochemistry and Photobiology A: Chemistr
Synthesis of titanate nanofibers co-sensitized with ZnS and Bi2S3 nanocrystallites and their application on pollutants removal
The synthesis of nanocomposite materials combining titanate nanofibers (TNF)
with nanocrystalline ZnS and Bi2S3 semiconductors is described in this work.
The TNF were produced via hydrothermal synthesis and sensitized with the
semiconductor nanoparticles, through a single-source precursor decomposition
method. ZnS and Bi2S3 nanoparticles were successfully grown onto the TNF's
surface and Bi2S3-ZnS/TNF nanocomposite materials with different layouts were
obtained using either a layer-by-layer or a co-sensitization approach. The
samples' photocatalytic performance was first evaluated through the production
of the hydroxyl radical using terephthalic acid as probe molecule. All the
tested samples show photocatalytic ability for the production of this oxidizing
species. Afterwards, the samples were investigated for the removal of methylene
blue. The nanocomposite materials with best adsorption ability for the organic
dye were the ZnS/TNF and Bi2S3ZnS/TNF. The removal of the methylene blue was
systematically studied, and the most promising results were obtained
considering a sequential combination of an adsorption-photocatalytic
degradation process using the Bi2S3ZnS/TNF powder as a highly adsorbent and
photocatalyst material.Comment: 26 pages, 10 figure
The d'-Dibaryon in the Nonrelativistic Quark Model
The narrow peak recently found in various pionic double charge exchange (DCX)
cross sections can be explained by the assumption of a universal resonance at
2065 MeV, called d'. We calculate the mass of a six-quark system with J^P=0^-,
T=0 quantum numbers employing a cluster model and a shell model basis to
diagonalize the nonrelativistic quark model Hamiltonian.Comment: 7 pages, Latex, 2 figures, invited talk at 6th Int. Symp. on Mesons
and Nucleons 1995, Blaubeuren, Germany, 10-14 July 1995, to be published in
pi-N Newsletter
Morphological and Structural Characterization of Cro2/Cr2o3 Films Grown by Laser-CVD
This work reports on the synthesis of chromium (III, IV) oxides films by KrF
laser-assisted CVD. Films were deposited onto sapphire substrates at room
temperature by photodissociation of Cr(CO)6 in dynamic atmospheres containing
oxygen and argon. A study of the processing parameters has shown that partial
pressure ratio of O2 to Cr(CO)6 and laser fluence are the prominent parameters
that have to be accurately controlled in order to co-deposit both crystalline
oxide phases. Films consistent with such a two-phase system were synthesised
for a laser fluence of 75 mJ cm-2 and a partial pressure ratio about 1.
PACS: 81.15.Fg, 81.15.Kk, 81.05.JeComment: 17 pages, 4 figure
Cr2O3 thin films grown at room temperature by low pressure laser chemical vapour deposition
Chromia (Cr2O3) has been extensively explored for the purpose of developing
widespread industrial applications, owing to the convergence of a variety of
mechanical, physical and chemical properties in one single oxide material.
Various methods have been used for large area synthesis of Cr2O3 films.
However, for selective area growth and growth on thermally sensitive materials,
laser-assisted chemical vapour deposition (LCVD) can be applied advantageously.
Here we report on the growth of single layers of pure Cr2O3 onto sapphire
substrates at room temperature by low pressure photolytic LCVD, using UV laser
radiation and Cr(CO)6 as chromium precursor. The feasibility of the LCVD
technique to access selective area deposition of chromia thin films is
demonstrated. Best results were obtained for a laser fluence of 120 mJ cm-2 and
a partial pressure ratio of O2 to Cr(CO)6 of 1.0. Samples grown with these
experimental parameters are polycrystalline and their microstructure is
characterised by a high density of particles whose size follows a lognormal
distribution. Deposition rates of 0.1 nm s-1 and mean particle sizes of 1.85
{\mu}m were measured for these films.Comment: 16 pages, 6 figures, accepted for publication in Thin Solid Film
Methane hydrate formation in confined nanospace can surpass nature
Natural methane hydrates are believed to be the largest source of hydrocarbons on Earth. These structures are formed in specific locations such as deep-sea sediments and the permafrost based on demanding conditions of high pressure and low temperature. Here we report that, by taking advantage of the confinement effects on nanopore space, synthetic methane hydrates grow under mild conditions (3.5 MPa and 2 degrees C), with faster kinetics (within minutes) than nature, fully reversibly and with a nominal stoichiometry that mimics nature. The formation of the hydrate structures in nanospace and their similarity to natural hydrates is confirmed using inelastic neutron scattering experiments and synchrotron X-ray powder diffraction. These findings may be a step towards the application of a smart synthesis of methane hydrates in energy-demanding applications (for example, transportation).We acknowledge UK Science and Technlology Facilities Council for the provision of beam time on the TOSCA spectrometer (Projects RB1410624 and RB122099) and financial support from the European Commission under the 7th Framework Programme through the 'Research Infrastructures' action of the 'Capacities' Programme (NMI3-II Grant number 283883). J.S.-A. and F.R. acknowledges the financial support from MINECO: Strategic Japanese-Spanish Cooperation Program (PLE2009-0052), Concert Project-NASEMS (PCIN-2013-057) and Generalitat Valenciana (PROMETEO/2009/002). F.R. and J.L.J. thank the financial support from MINECO (MAT2012-38567-C02-01, Consolider Ingenio 2010-Multicat CSD-2009-00050 and SEV-2012-0267). K.K. thanks Grant-in-Aid for Scientific Research (A) (2424-1038), Japan. A.B. and A.U. thank the financial support from MINECO (SEV-2013-0319). J.L.J. and I.P. thank synchrotron ALBA for beamtime availability.Casco, M.; Silvestre Albero, J.; Ramirez-Cuesta, A.; Rey Garcia, F.; Jorda Moret, JL.; Bansode, A.; Urakawa, A.... (2015). Methane hydrate formation in confined nanospace can surpass nature. Nature Communications. 6(6432):1-8. https://doi.org/10.1038/ncomms7432S1866432Sloan, E. D. Jr., & Koh, C. A. Clathrate Hydrates of Natural Gases 3rd edn CRC Press (2007).Gutt, C. et al. The structure of deuterated methane-hydrate. J. Chem. Phys. 113, 4713–4721 (2000).Holbrook, W. S., Hoskins, H., Wood, W. T., Stephen, R. A. & Lizarralde, D. Methane hydrate and free gas on the Blake Ridge from vertical seismic profiling. Science 273, 1840–1843 (1996).Sloan, E. D. Jr., Fundamental principles and applications of natural gas hydrates. Nature 426, 353–363 (2003).Rodríguez-Reinoso, F., Almansa, C. & Molina-Sabio, M. Contribution to the evaluation of density of methane adsorbed on activated carbon. J. Phys. Chem. B 109, 20227–20231 (2005).Kockrick, E. et al. Ordered mesoporous carbide derived carbons for high pressure gas storage. Carbon 48, 1707–1717 (2010).Klein, N. et al. A mesoporous metal-organic framework. Angew. Chem. Int. Ed. 48, 9954–9957 (2009).Makal, T. A., Li, J.-R., Lu, W. & Zhou, H.-C. Methane storage in advanced porous materials. Chem. Soc. Rev. 41, 7761–7779 (2012).Peng, Y. et al. Methane storage in metal-organic frameworks: Current records, surprise findings, and challenges. J. Am.Chem. Soc. 135, 11887–11894 (2013).Casco, M. E. et al. High-pressure methane storage in porous materials: are carbon materials in the pole position? Chem. Mater 27, 959–964 (2015).Ramos-Fernández, J. M., Martínez-Escandell, M. & Rodríguez-Reinoso, F. Production of binderless activated carbon monoliths by KOH activation of carbon mesophase materials. Carbon 46, 384–386 (2008).Marsh, H. & Rodríguez-Reinoso, F. Activated Carbon Elsevier (2006).Kubo, T. et al. Diffusion-barrier-free porous carbon monoliths as a new form of activated carbon. ChemSusChem 5, 2271–2277 (2012).Kaneko, K., Itoh, T. & Fujimori, T. Collective interactions of molecules with an interfacial solid. Chem. Lett. 41, 466–475 (2012).Nakamura, M., Ohba, T., Branton, P., Kanoh, H. & Kaneko, K. Equilibrium-time and pore-width dependent hysteresis of water adsorption isotherm on hydrophobic microporous carbons. Carbon 48, 305–308 (2010).Vysniauskas, A. & Bishnoi, P. R. A kinetic study of methane hydrate formation. Chem. Eng. Sci. 38, 1061–1072 (1983).Junhong, Q. & Tianmin, G. Kinetics of methane hydrate formation in pure water and inhibitor containing systems. Chin. J. Chem. Eng 10, 316–322 (2002).Liu, J., Zhou, Y., Sun, Y., Su, W. & Zhou, L. Methane storage in wet carbon of tailored pore sizes. Carbon 49, 3731–3736 (2011).Perrin, A., Celzard, A., Marêché, J. F. & Furdin, G. Methane storage within dry and wet activated carbons: a comparative study. Energy Fuels 17, 1283–1291 (2003).Zhou, L., Liu, L., Su, W., Sun, Y. & Zhou, Y. Progress in studies of natural gas storage with wet adsorbents. Energy Fuels 24, 3789–3795 (2010).Celzard, A. & Marêché, J. F. Optimal wetting of activated carbons for methane hydrate formation. Fuel 85, 957–966 (2006).Webb, E. B. et al. High pressure rheology of hydrate slurries formed from water-in-oil emulsions. Energy Fuels 26, 3504–3509 (2012).Urita, K. et al. Confinement in carbon nanospace-induced production of KI nanocrystals of high-pressure phase. J. Am. Chem. Soc. 133, 10344–10347 (2011).Fujimori, T. et al. Conducting linear chains of sulphur inside carbon nanotubes. Nat. Commun. 4, 2162 (2013).Tse, J. S., Ratcliffe, C. L., Powell, B. M., Sears, V. F. & Handa, Y. P. Rotational and translational motions of trapped methane. Incoherent inelastic neutron scattering of methane hydrate. J. Phys. Chem. A 101, 4491–4495 (1997).Gutt, C. et al. Quantum rotations in natural methane-clathrates from the Pacific sea-floor. Europhys. Lett. 48, 269–275 (1999).Stern, L. A., Kirby, S. H. & Durham, W. B. Peculiarities of methane clathrate hydrate formation and solid-state deformation, including possible superheating of water ice. Science 273, 1843–1848 (1996).Gutt, C. et al. The structure of deuterated methane hydrate. J. Chem. Phys. 113, 4713–4721 (2000).Everett, S. M. et al. Kinetics of methane hydrate decomposition studies via in situ low temperature X-ray powder diffraction. J. Phys. Chem. A 117, 3593–3598 (2013).Miyawaki, J. et al. Macroscopic evidence of enhanced formation of methane nanohydrates in hydrophobic nanospaces. J. Phys. Chem. B 102, 2187–2192 (1998)
Search for composite and exotic fermions at LEP 2
A search for unstable heavy fermions with the DELPHI detector at LEP is
reported. Sequential and non-canonical leptons, as well as excited leptons and
quarks, are considered. The data analysed correspond to an integrated
luminosity of about 48 pb^{-1} at an e^+e^- centre-of-mass energy of 183 GeV
and about 20 pb^{-1} equally shared between the centre-of-mass energies of 172
GeV and 161 GeV. The search for pair-produced new leptons establishes 95%
confidence level mass limits in the region between 70 GeV/c^2 and 90 GeV/c^2,
depending on the channel. The search for singly produced excited leptons and
quarks establishes upper limits on the ratio of the coupling of the excited
fermio
Search for lightest neutralino and stau pair production in light gravitino scenarios with stau NLSP
Promptly decaying lightest neutralinos and long-lived staus are searched for
in the context of light gravitino scenarios. It is assumed that the stau is the
next to lightest supersymmetric particle (NLSP) and that the lightest
neutralino is the next to NLSP (NNLSP). Data collected with the Delphi detector
at centre-of-mass energies from 161 to 183 \GeV are analysed. No evidence of
the production of these particles is found. Hence, lower mass limits for both
kinds of particles are set at 95% C.L.. The mass of gaugino-like neutralinos is
found to be greater than 71.5 GeV/c^2. In the search for long-lived stau,
masses less than 70.0 to 77.5 \GeVcc are excluded for gravitino masses from 10
to 150 \eVcc . Combining this search with the searches for stable heavy leptons
and Minimal Supersymmetric Standard Model staus a lower limit of 68.5 \GeVcc
may be set for the stau mas
Anisotropic flow of charged hadrons, pions and (anti-)protons measured at high transverse momentum in Pb-Pb collisions at TeV
The elliptic, , triangular, , and quadrangular, , azimuthal
anisotropic flow coefficients are measured for unidentified charged particles,
pions and (anti-)protons in Pb-Pb collisions at TeV
with the ALICE detector at the Large Hadron Collider. Results obtained with the
event plane and four-particle cumulant methods are reported for the
pseudo-rapidity range at different collision centralities and as a
function of transverse momentum, , out to GeV/.
The observed non-zero elliptic and triangular flow depends only weakly on
transverse momentum for GeV/. The small dependence
of the difference between elliptic flow results obtained from the event plane
and four-particle cumulant methods suggests a common origin of flow
fluctuations up to GeV/. The magnitude of the (anti-)proton
elliptic and triangular flow is larger than that of pions out to at least
GeV/ indicating that the particle type dependence persists out
to high .Comment: 16 pages, 5 captioned figures, authors from page 11, published
version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/186
- …