Investigation of a Photoelectrochemical Passivated ZnO-Based Glucose Biosensor

A vapor cooling condensation system was used to deposit high quality intrinsic ZnO thin films and intrinsic ZnO nanorods as the sensing membrane of extended-gate field-effect-transistor (EGFET) glucose biosensors. The sensing sensitivity of the resulting glucose biosensors operated in the linear range was 13.4 μA mM−1 cm−2. To improve the sensing sensitivity of the ZnO-based glucose biosensors, the photoelectrochemical method was utilized to passivate the sidewall surfaces of the ZnO nanorods. The sensing sensitivity of the ZnO-based glucose biosensors with passivated ZnO nanorods was significantly improved to 20.33 μA mM−1 cm−2 under the same measurement conditions. The experimental results verified that the sensing sensitivity improvement was the result of the mitigation of the Fermi level pinning effect caused by the dangling bonds and the surface states induced on the sidewall surface of the ZnO nanorods

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

Versatile function of nanostructured-ZnO sensors using photo-assisted method

The vertical ZnO nanorod array was grown as the piezoelectric pressure sensors. By taking advantages of the induced conductivity of the ZnO nanorod array under light illumination, the nanostructured-ZnO pressure sensors exhibited the improved sensitivity of 7.89 μA ⋅ cm2/mN compared to 0.027 μA ⋅ cm2/mN of the ones without light illumination. Moreover, the sensing current of the nanostructured-ZnO pressure sensors depended on the ultraviolet wavelength and power density. Consequently, the sensors could be applied as versatile function of pressure sensors, light wavelength sensors, and light power density sensors

Cycle-by-cycle variation in spark ignition combustion engines

SIGLEAvailable from British Library Document Supply Centre-DSC:D199177 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

The relationship between frontal lobe lesions, course of post-stroke depression, and 1-year prognosis in patients with first-ever ischemic stroke.

Most studies on post-stroke depression (PSD) have focused on a certain time point after stroke instead of the time course of PSD. The aim of this study was to determine the relationship between frontal lobe lesions, course of PSD over a year following the stroke onset, and the 1-year prognosis in patients with first-ever ischemic stroke.A total of 1067 patients from the prospective cohort study on the incidence and outcome of patients with post stroke depression in China who were diagnosed with first-ever ischemic stroke and attended 4 follow-up visits at 14±2 days, 3 months, 6 months, and 1 year after stroke onset, were enrolled in the study. PSD was diagnosed according to DSM-IV. The course of PSD was divided into the following two categories: persistent/recurrent depression and no/transient depression. Patients with any ischemic lesion responsible for the indexed stroke event located in the frontal lobe were defined as patients with frontal lobe lesions. Modified Rankin Scale (mRS) ≥2 at 1-year was considered to be poor prognosis.There were 109 patients with and 958 patients without frontal lobe lesions that formed the frontal lobe (FL) and no-frontal lobe (NFL) groups, respectively. After adjusting for confounding variables, frontal lobe lesion was significantly associated with persistent/recurrent PSD (OR 2.025, 95%CI 1.039-3.949). Overall, 32.7% of patients in the FL group had poor prognosis at 1- year compared with 22.7% in the NFL group (P = 0.021). Compared with no/transient depression, persistent/recurrent depression was found to be an independent predictor of poor prognosis at 1-year both in FL and NFL groups.Long-term and periodical screening, evaluation and treatment are needed for PSD after the onset of ischemic stroke, particularly for patients with frontal lobe infarction

Table_1_Correlation between long-term use of metformin and incidence of NAFLD among patients with type 2 diabetes mellitus: A real-world cohort study.docx

Background and aimsStudies have demonstrated that the short-term use of metformin benefits liver function among patients with type 2 diabetes mellitus (T2DM). However, few studies have reported on the effects of long-term metformin treatment on liver function or liver histology. This study investigated the correlation between metformin use and the incidence of nonalcoholic fatty liver disease (NAFLD) among patients with T2DM.MethodsThis population-based study investigated the risk of NAFLD among patients with T2DM who received metformin treatment between 2001-2018. Metformin users and metformin nonusers were enrolled and matched to compare the risk of NAFLD.ResultsAfter 3 years, the patients who received ConclusionPatients with T2DM who received metformin of <300 cDDD or used metformin at an intensity of <10 and 10–25 DDD/month were at a high risk of developing NAFLD. The results of this study also indicated that patients with T2DM receiving metformin and with high scores on the DCSI were at a high risk of developing NAFLD.</p

Thermal dewetting with a chemically heterogeneous nano-template for self-assembled L1(0) FePt nanoparticle arrays.

A design for the fabrication of metallic nanoparticles is presented by thermal dewetting with a chemically heterogeneous nano-template. For the template, we fabricate a nanostructured polystyrene-b-polydimethylsiloxane (PS-b-PDMS) film on a Si|SiO2 substrate, followed by a thermal annealing and reactive ion etching (RIE) process. This gives a template composed of an ordered hexagonal array of SiOC hemispheres emerging in the polystyrene matrix. After the deposition of a FePt film on this template, we utilize the rapid thermal annealing (RTA) process, which provides in-plane stress, to achieve thermal dewetting and structural ordering of FePt simultaneously. Since the template is composed of different composition surfaces with periodically varied morphologies, it offers more tuning knobs to manipulate the nanostructures. We show that both the decrease in the area of the PS matrix and the increase in the strain energy relaxation transfer the dewetted pattern from the randomly distributed nanoparticles into a hexagonal periodic array of L10 FePt nanoparticles. Transmission electron microscopy with the in situ heating stage reveals the evolution of the dewetting process, and confirms that the positions of nanoparticles are aligned with those of the SiOC hemispheres. The nanoparticles formed by this template-dewetting show an average diameter and center-to-center distance of 19.30 ± 2.09 nm and 39.85 ± 4.80 nm, respectively. The hexagonal array of FePt nanoparticles reveals a large coercivity of 1.5 T, much larger than the nanoparticles fabricated by top-down approaches. This approach offers an efficient pathway toward self-assembled nanostructures in a wide range of material systems

Thermal dewetting with a chemically heterogeneous nano-template for self-assembled L1(0) FePt nanoparticle arrays.

A design for the fabrication of metallic nanoparticles is presented by thermal dewetting with a chemically heterogeneous nano-template. For the template, we fabricate a nanostructured polystyrene-b-polydimethylsiloxane (PS-b-PDMS) film on a Si|SiO2 substrate, followed by a thermal annealing and reactive ion etching (RIE) process. This gives a template composed of an ordered hexagonal array of SiOC hemispheres emerging in the polystyrene matrix. After the deposition of a FePt film on this template, we utilize the rapid thermal annealing (RTA) process, which provides in-plane stress, to achieve thermal dewetting and structural ordering of FePt simultaneously. Since the template is composed of different composition surfaces with periodically varied morphologies, it offers more tuning knobs to manipulate the nanostructures. We show that both the decrease in the area of the PS matrix and the increase in the strain energy relaxation transfer the dewetted pattern from the randomly distributed nanoparticles into a hexagonal periodic array of L10 FePt nanoparticles. Transmission electron microscopy with the in situ heating stage reveals the evolution of the dewetting process, and confirms that the positions of nanoparticles are aligned with those of the SiOC hemispheres. The nanoparticles formed by this template-dewetting show an average diameter and center-to-center distance of 19.30 ± 2.09 nm and 39.85 ± 4.80 nm, respectively. The hexagonal array of FePt nanoparticles reveals a large coercivity of 1.5 T, much larger than the nanoparticles fabricated by top-down approaches. This approach offers an efficient pathway toward self-assembled nanostructures in a wide range of material systems

Effects of mutations in the CRAC-like motif of CdtC on CdtB nuclear localization.

<p>CHO-K1 cells were treated with mock medium alone or with CdtABC^wt or CdtABC^Y81P (200 nM each subunit) at 37°C for 4 h. (A) Nuclear fractions were prepared and subjected to western blot for analysis of CdtB. Proliferating cell nuclear antigen (PCNA) was used as a loading control for the nuclear fraction of cell lysates. (B) Expression levels of CdtB protein were analyzed using scanning densitometry. The signals of CdtB/PCNA were expressed as relative values. Statistical significance was evaluated using Student's <i>t</i>-test. *, <i>P</i><0.05 was considered as statistically significant.</p