Deep domain adaptation by weighted entropy minimization for the classification of aerial images

Fully convolutional neural networks (FCN) are successfully used for the automated pixel-wise classification of aerial images and possibly additional data. However, they require many labelled training samples to perform well. One approach addressing this issue is semi-supervised domain adaptation (SSDA). Here, labelled training samples from a source domain and unlabelled samples from a target domain are used jointly to obtain a target domain classifier, without requiring any labelled samples from the target domain. In this paper, a two-step approach for SSDA is proposed. The first step corresponds to a supervised training on the source domain, making use of strong data augmentation to increase the initial performance on the target domain. Secondly, the model is adapted by entropy minimization using a novel weighting strategy. The approach is evaluated on the basis of five domains, corresponding to five cities. Several training variants and adaptation scenarios are tested, indicating that proper data augmentation can already improve the initial target domain performance significantly resulting in an average overall accuracy of 77.5%. The weighted entropy minimization improves the overall accuracy on the target domains in 19 out of 20 scenarios on average by 1.8%. In all experiments a novel FCN architecture is used that yields results comparable to those of the best-performing models on the ISPRS labelling challenge while having an order of magnitude fewer parameters than commonly used FCNs. © 2020 Copernicus GmbH. All rights reserved

Assessing the semantic similarity of images of silk fabrics using convolutional neural networks

This paper proposes several methods for training a Convolutional Neural Network (CNN) for learning the similarity between images of silk fabrics based on multiple semantic properties of the fabrics. In the context of the EU H2020 project SILKNOW (http://silknow.eu/), two variants of training were developed, one based on a Siamese CNN and one based on a triplet architecture. We propose different definitions of similarity and different loss functions for both training strategies, some of them also allowing the use of incomplete information about the training data. We assess the quality of the trained model by using the learned image features in a k-NN classification. We achieve overall accuracies of 93-95% and average F1-scores of 87-92%. © 2020 Copernicus GmbH. All rights reserved

Semantic segmentation of Brazilian Savanna vegetation using high spatial resolution satellite data and U-net

Large-scale mapping of the Brazilian Savanna (Cerrado) vegetation using remote sensing images is still a challenge due to the high spatial variability and spectral similarity of the different characteristic vegetation types (physiognomies). In this paper, we report on semantic segmentation of the three major groups of physiognomies in the Cerrado biome (Grasslands, Savannas and Forests) using a fully convolutional neural network approach. The study area, which covers a Brazilian conservation unit, was divided into three regions to enable testing the approach in regions that were not used in the training phase. A WorldView-2 image was used in cross validation experiments, in which the average overall accuracy achieved with the pixel-wise classifications was 87.0%. The F-1 score values obtained with the approach for the classes Grassland, Savanna and Forest were of 0.81, 0.90 and 0.88, respectively. Visual assessment of the semantic segmentation outcomes was also performed and confirmed the quality of the results. It was observed that the confusion among classes occurs mainly in transition areas, where there are adjacent physiognomies if a scale of increasing density is considered, which agrees with previous studies on natural vegetation mapping for the Cerrado biome. © Authors 2020. All rights reserved

Wie schnell steigt Magma auf? : Maschinelles Lernen (ML) hilft bei der Antwort

Wissenschaftler*innen der Geoinformatik und der Geowissenschaften bündeln ihre Expertisen, um Georisiken zu minimieren. In diesem Beitrag zeigen sie, dass maschinelles Lernen (ML) für die Auswertung von großen analytischen Datensätzen unumgänglich ist, um Prozesse in Magma-Reservoiren nachzuvollziehen. Der Einsatz von ML ermöglicht ein schnelles Reagieren bei laufenden vulkanischen Eruptionen, wie zum Beispiel La Palma

From Silk to Digital Technologies: A Gateway to New Opportunities for Creative Industries, Traditional Crafts and Designers. The SILKNOW Case

Nowadays, cultural heritage is more than ever linked to the present. It links us to our cultural past through the conscious act of preserving and bequeathing to future generations, turning society into its custodian. The appreciation of cultural heritage happens not only because of its communicative power, but also because of its economic power, through sustainable development and the promotion of creative industries. This paper presents SILKNOW, an EU-H2002 funded project and its application to cultural heritage, as well as to creative industries and design innovation. To this end, it presents the use of image recognition tools applied to cultural heritage, through the interoperability of data in the open-access registers of silk museums and its presentation, analysis and creative process carried out by the design students of EASD Valencia as a case study, in the branches of jewellery and fashion project, inspired by the heritage of silk

A hinged external fixator for complex elbow dislocations: A multicenter prospective cohort study

Background: Elbow dislocations can be classified as simple or complex. Simple dislocations are characterized by the absence of fractures, while complex dislocations are associated with fractures of the radial head, olecranon, or coronoid process. The majority of patients with these complex dislocations are treated with open reduction and internal fixation (ORIF), or arthroplasty in case of a non-reconstructable radial head fracture. If the elbow joint remains unstable after fracture fixation, a hinged elbow fixator can be applied. The fixator provides stability to the elbow joint, and allows for early mobilization. The latter may be important for preventing stiffness of the joint. The aim of this study is to determine the effect of early mobilization with a hinged external elbow fixator on clinical outcome in patients with complex elbow dislocations with residual instability following fracture fixation. Methods/Design. The design of the study will be a multicenter prospective cohort study of 30 patients who have sustained a complex elbow dislocation and are treated with a hinged elbow fixator following fracture fixation because of residual instability. Early active motion exercises within the limits of pain will be started immediately after surgery under supervision of a physical therapist. Outcome will be evaluated at regular intervals over the subsequent 12 months. The primary outcome is the Quick Disabilities of the Arm, Shoulder, and Hand score. The secondary outcome measures are the Mayo Elbow Performance Index, Oxford Elbow Score, pain level at both sides, range of motion of the elbow joint at both sides, radiographic healing of the fractures and formation of periarticular ossifications, rate of secondary interventions and complications, and health-related quality of life (Short-Form 36). Discussion. The outcome of this study will yield quantitative data on the functional outcome in patients with a complex elbow dislocation and who are treated with ORIF and additional stabilization with a hinged elbow fixator. Trial Registration. The trial is registered at the Netherlands Trial Register (NTR1996)

HUMeral Shaft Fractures: MEasuring Recovery after Operative versus Non-operative Treatment (HUMMER): A multicenter comparative observational study

Background: Fractures of the humeral shaft are associated with a profound temporary (and in the elderly sometimes even permanent) impairment of independence and quality of life. These fractures can be treated operatively or non-operatively, but the optimal tailored treatment is an unresolved problem. As no high-quality comparative randomized or observational studies are available, a recent Cochrane review concluded there is no evidence of sufficient scientific quality available to inform the decision to operate or not. Since randomized controlled trials for this injury have shown feasibility issues, this study is designed to provide the best achievable evidence to answer this unresolved problem. The primary aim of this study is to evaluate functional recovery after operative versus non-operative treatment in adult patients who sustained a humeral shaft fracture. Secondary aims include the effect of treatment on pain, complications, generic health-related quality of life, time to resumption of activities of daily living and work, and cost-effectiveness. The main hypothesis is that operative treatment will result in faster recovery. Methods/design. The design of the study will be a multicenter prospective observational study of 400 patients who have sustained a humeral shaft fracture, AO type 12A or 12B. Treatment decision (i.e., operative or non-operative) will be left to the discretion of the treating surgeon. Critical elements of treatment will be registered and outcome will be monitored at regular intervals over the subsequent 12 months. The primary outcome measure is the Disabilities of the Arm, Shoulder, and Hand score. Secondary outcome measures are the Constant score, pain level at both sides, range of motion of the elbow and shoulder joint at both sides, radiographic healing, rate of complications and (secondary) interventions, health-related quality of life (Short-Form 36 and EuroQol-5D), time to resumption of ADL/work, and cost-effectiveness. Data will be analyzed using univariate and multivariable analyses (including mixed effects regression analysis). The cost-effectiveness analysis will be performed from a societal perspective. Discussion. Successful completion of this trial will provide evidence on the effectiveness of operative versus non-operative treatment of patients with a humeral shaft fracture. Trial registration. The trial is registered at the Netherlands Trial Register (NTR3617)

Measurement of the prompt J/psi and psi(2S) polarizations in pp collisions at sqrt(s) = 7 TeV

The polarizations of prompt J/psi and psi(2S) mesons are measured in proton-proton collisions at sqrt(s) = 7 TeV, using a dimuon data sample collected by the CMS experiment at the LHC, corresponding to an integrated luminosity of 4.9 inverse femtobarns. The prompt J/psi and psi(2S) polarization parameters lambda[theta], lambda[phi], and lambda[theta, phi], as well as the frame-invariant quantity lambda(tilde), are measured from the dimuon decay angular distributions in three different polarization frames. The J/psi results are obtained in the transverse momentum range 14 < pt < 70 GeV, in the rapidity intervals abs(y) < 0.6 and 0.6 < abs(y) < 1.2. The corresponding psi(2S) results cover 14 < pt < 50 GeV and include a third rapidity bin, 1.2 < abs(y) < 1.5. No evidence of large transverse or longitudinal polarizations is seen in these kinematic regions, which extend much beyond those previously explored

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI