Microfocus X-ray scattering investigations of eggshell nanotexture

The avian eggshell is a highly ordered calcitic bioceramic composite, with both inorganic and organic constituents. The interactions between the inorganic and organic components within the structure are poorly understood but are likely to occur at the nanometre level. Thus structural variation at this level may impinge on the overall structural integrity and mechanical performance of the eggshell, and therefore analysis at this level is fundamental in fully understanding this ordered structure. In this study, structural changes in the mineral crystallites were investigated by microfocus small-angle X-ray scattering (µSAXS) using synchrotron radiation. Small-angle X-ray scattering (SAXS) can be used to investigate structures on the nanometre scale such as size, shape, arrangement and internal porosity. A microfocused X-ray beam, 1.5 µm vertically by 7 µm, was used to produce vertical linear scans of the eggshell section. SAXS patterns were taken from the eggshell membrane (inner surface of the eggshell) to the cuticle (outer surface of the eggshell). This allowed textural variations within the eggshell to be mapped. The scattering intensity profile was then used to derive the dimension of scattering objects that define the nanotexture. The nanotexture observed may result from the presence of the organic matrix, which is embedded as intracrystalline particles producing voids within the calcified framework of large (>1 µm) calcite crystals. Porod analysis revealed the average size of a scattering interface to be approximately 4.5 nm with small changes that had a depth-dependent variation. These were largest at the mammillary layer/membrane boundary. The palisade layer displayed a small upward trend in size of scattering object. Parallel scans showed that the textural variations observed within the palisade layer are significant and indicate local subtextures. In addition, many of the patterns exhibit diffuse scattering streaks that could result from reflectivity from the larger crystallite interfaces. Changes in the orientation of diffuse streaks were observed within the different layers, the membranes, mammillary layer, palisade layer, vertical crystal layer and cuticle, indicating certain preferred orientations of the crystallites within the layers. The nanotextural variations that are apparent could have implications at the macroscopic level of the resulting eggshell

Structure of cellulose microfibrils in primary cell-walls from collenchyma

In the primary walls of growing plant cells, the glucose polymer cellulose is assembled into long microfibrils a few nanometers in diameter. The rigidity and orientation of these microfibrils control cell expansion; therefore, cellulose synthesis is a key factor in the growth and morphogenesis of plants. Celery (Apium graveolens) collenchyma is a useful model system for the study of primary wall microfibril structure because its microfibrils are oriented with unusual uniformity, facilitating spectroscopic and diffraction experiments. Using a combination of x-ray and neutron scattering methods with vibrational and nuclear magnetic resonance spectroscopy, we show that celery collenchyma microfibrils were 2.9 to 3.0 nm in mean diameter, with a most probable structure containing 24 chains in cross section, arranged in eight hydrogen-bonded sheets of three chains, with extensive disorder in lateral packing, conformation, and hydrogen bonding. A similar 18-chain structure, and 24-chain structures of different shape, fitted the data less well. Conformational disorder was largely restricted to the surface chains, but disorder in chain packing was not. That is, in position and orientation, the surface chains conformed to the disordered lattice constituting the core of each microfibril. There was evidence that adjacent microfibrils were noncovalently aggregated together over part of their length, suggesting that the need to disrupt these aggregates might be a constraining factor in growth and in the hydrolysis of cellulose for biofuel production

Structural and biophysical characterization of bacillus thuringiensis insecticidal proteins Cry34Ab1 and Cry35Ab1

Bacillus thuringiensis strains are well known for the production of insecticidal proteins upon sporulation and these proteins are deposited in parasporal crystalline inclusions. The majority of these insect-specific toxins exhibit three domains in the mature toxin sequence. However, other Cry toxins are structurally and evolutionarily unrelated to this three-domain family and little is known of their three dimensional structures, limiting our understanding of their mechanisms of action and our ability to engineer the proteins to enhance their function. Among the non-three domain Cry toxins, the Cry34Ab1 and Cry35Ab1 proteins from B. thuringiensis strain PS149B1 are required to act together to produce toxicity to the western corn rootworm (WCR) Diabrotica virgifera virgifera Le Conte via a pore forming mechanism of action. Cry34Ab1 is a protein of ∼14 kDa with features of the aegerolysin family (Pfam06355) of proteins that have known membrane disrupting activity, while Cry35Ab1 is a ∼44 kDa member of the toxin_10 family (Pfam05431) that includes other insecticidal proteins such as the binary toxin BinA/BinB. The Cry34Ab1/Cry35Ab1 proteins represent an important seed trait technology having been developed as insect resistance traits in commercialized corn hybrids for control of WCR. The structures of Cry34Ab1 and Cry35Ab1 have been elucidated to 2.15 Å and 1.80 Å resolution, respectively. The solution structures of the toxins were further studied by small angle X-ray scattering and native electrospray ion mobility mass spectrometry. We present here the first published structure from the aegerolysin protein domain family and the structural comparisons of Cry34Ab1 and Cry35Ab1 with other pore forming toxins

Calculating the Prepotential by Localization on the Moduli Space of Instantons

We describe a new technique for calculating instanton effects in supersymmetric gauge theories applicable on the Higgs or Coulomb branches. In these situations the instantons are constrained and a potential is generated on the instanton moduli space. Due to existence of a nilpotent fermionic symmetry the resulting integral over the instanton moduli space localizes on the critical points of the potential. Using this technology we calculate the one- and two-instanton contributions to the prepotential of SU(N) gauge theory with N=2 supersymmetry and show how the localization approach yields the prediction extracted from the Seiberg-Witten curve. The technique appears to extend to arbitrary instanton number in a tractable way.Comment: 24 pages, JHEP.cls, more references and extra discussion on N_F=2N cas

On minimal coupling of the ABC-superparticle to supergravity background

By rigorous application of the Hamiltonian methods we show that the ABC-formulation of the Siegel superparticle admits consistent minimal coupling to external supergravity. The consistency check proves to involve all the supergravity constraints.Comment: 8 pages RevTex file, to appear in Phys. Rev.

Differential geometry construction of anomalies and topological invariants in various dimensions

In the model of extended non-Abelian tensor gauge fields we have found new metric-independent densities: the exact (2n+3)-forms and their secondary characteristics, the (2n+2)-forms as well as the exact 6n-forms and the corresponding secondary (6n-1)-forms. These forms are the analogs of the Pontryagin densities: the exact 2n-forms and Chern-Simons secondary characteristics, the (2n-1)-forms. The (2n+3)- and 6n-forms are gauge invariant densities, while the (2n+2)- and (6n-1)-forms transform non-trivially under gauge transformations, that we compare with the corresponding transformations of the Chern-Simons secondary characteristics. This construction allows to identify new potential gauge anomalies in various dimensions.Comment: 27 pages, references added, matches published versio

Specific oligomerization of the 5-HT1A receptor in the plasma membrane

In the present study we analyze the oligomerization of the 5-HT1A receptor within living cells at the sub-cellular level. Using a 2-excitation Förster Resonance Energy Transfer (FRET) method combined with spectral microscopy we are able to estimate the efficiency of energy transfer based on donor quenching as well as acceptor sensitization between CFP-and YFP-tagged 5-HT1A receptors at the plasma membrane. Through the analysis of the level of apparent FRET efficiency over the various relative amounts of donor and acceptor, as well as over a range of total surface expressions of the receptor, we verify the specific interaction of these receptors. Furthermore we study the role of acylation in this interaction through measurements of a palmitoylation-deficient 5-HT1A receptor mutant. Palmitoylation increases the tendency of a receptor to localize in lipid rich microdomains of the plasma membrane. This increases the effective surface density of the receptor and provides for a higher level of stochastic interaction

Different representations for the action principle in 4D N = 2 supergravity

Within the superspace formulation for four-dimensional N = 2 matter-coupled supergravity developed in arXiv:0805.4683, we elaborate two approaches to reduce the superfield action to components. One of them is based on the principle of projective invariance which is a purely N = 2 concept having no analogue in simple supergravity. In this approach, the component reduction of the action is performed without imposing any Wess-Zumino gauge condition, that is by keeping intact all the gauge symmetries of the superfield action, including the super-Weyl invariance. As a simple application, the c-map is derived for the first time from superfield supergravity. Our second approach to component reduction is based on the method of normal coordinates around a submanifold in a curved superspace, which we develop in detail. We derive differential equations which are obeyed by the vielbein and the connection in normal coordinates, and which can be used to reconstruct these objects, in principle in closed form. A separate equation is found for the super-determinant of the vielbein, which allows one to reconstruct it without a detailed knowledge of the vielbein. This approach is applicable to any supergravity theory in any number of space-time dimensions. As a simple application of this construction, we reduce an integral over the curved N = 2 superspace to that over the chiral subspace of the full superspace. We also give a new representation for the curved projective-superspace action principle as a chiral integral.Comment: 44 pages; V2: typos corrected, a comment added; V3: eq. (3.16) corrected, version published in JHEP; V4: more typos correcte

Search for direct production of charginos and neutralinos in events with three leptons and missing transverse momentum in √s = 7 TeV pp collisions with the ATLAS detector

A search for the direct production of charginos and neutralinos in final states with three electrons or muons and missing transverse momentum is presented. The analysis is based on 4.7 fb−1 of proton–proton collision data delivered by the Large Hadron Collider and recorded with the ATLAS detector. Observations are consistent with Standard Model expectations in three signal regions that are either depleted or enriched in Z-boson decays. Upper limits at 95% confidence level are set in R-parity conserving phenomenological minimal supersymmetric models and in simplified models, significantly extending previous results