38 research outputs found

    Antimicrobial activity of ProRoot MTA in contact with blood

    Get PDF
    Dental materials based on Portland cement, which is used in the construction industry have gained popularity for clinical use due to their hydraulic properties, the interaction with tooth tissue and their antimicrobial properties. The antimicrobial properties are optimal in vitro. However in clinical use contact with blood may affect the antimicrobial properties. This study aims to assess whether antimicrobial properties of the Portland cement-based dental cements such as mineral trioxide aggregate (MTA) are also affected by contact with blood present in clinical situations. ProRoot MTA, a Portland cement-based dental cement was characterized following contact with water, or heparinized blood after 1 day and 7 days aging. The antimicrobial activity under the mentioned conditions was assessed using 3 antimicrobial tests: agar diffusion test, direct contact test and intratubular infection test. MTA in contact with blood was severely discoloured, exhibited an additional phosphorus peak in elemental analysis, no calcium hydroxide peaks and no areas of bacterial inhibition growth in the agar diffusion test were demonstrated. ProRoot MTA showed limited antimicrobial activity, in both the direct contact test and intratubular infection test. When aged in water ProRoot MTA showed higher antimicrobial activity than when aged in blood. Antimicrobial activity reduced significantly after 7 days. Further assessment is required to investigate behaviour in clinical situations.ERDF (Malta) for the financing of the testing equipment through the project: “Developing an Interdisciplinary Material Testing and Rapid Prototyping R&D Facility” (Ref. no. 012)

    Bioactivity, physical and chemical properties of MTA mixed with propylene glycol

    Get PDF
    AbstractObjective To investigate the physical (setting time, hardness, flowability, microstructure) and chemical (pH change, calcium release, crystallinity) properties and the biological outcomes (cell survival and differentiation) of mineral trioxide aggregate (MTA) mixed using different proportions of propylene glycol (PG) and water.Material and Methods White MTA was mixed with different water/PG ratios (100/0, 80/20 and 50/50). Composition (XRD), microstructure (SEM), setting time (ASTM C266-13), flowability (ANSI/ADA 57-2000), Knoop hardness (100 g/10 s) and chemical characteristics (pH change and Ca2+ release for 7 days) were evaluated. Cell proliferation, osteo/odontoblastic gene expression and mineralization induced by MTA mixed with PG were evaluated. MTA discs (5 mm in diameter, 2 mm thick) were prepared and soaked in culture medium for 7 days. Next, the discs were removed and the medium used to culture dental pulp stem cells (DPSC) for 28 days. Cells survival was evaluated using MTS assay (24, 72 and 120 h) and differentiation with RT-PCR (ALP, OCN, Runx2, DSPP and MEPE) and alizarin red staining (7 and 14 days). Data were analysed using one-way ANOVA and Tukey’s post-hoc analysis (a=0.05).Results The addition of PG significantly increased setting time, flowability and Ca2+ release, but it compromised the hardness of the material. SEM showed that 50/50 group resulted porous material after setting due to the incomplete setting reaction, as shown by XRD analysis. The addition of PG (80/20 and 50/50) was not capable to improve cell proliferation or to enhance gene expression, and mineralized deposition of DPSC after 7 and 14 days as compared to the 100/0.Conclusion Except for flowability, the addition of PG did not promote further improvements on the chemical and physical properties evaluated, and it was not capable of enhancing the bioactivity of the MTA

    Формирование эмоциональной культуры как компонента инновационной культуры студентов

    Get PDF
    Homozygosity has long been associated with rare, often devastating, Mendelian disorders1 and Darwin was one of the first to recognise that inbreeding reduces evolutionary fitness2. However, the effect of the more distant parental relatedness common in modern human populations is less well understood. Genomic data now allow us to investigate the effects of homozygosity on traits of public health importance by observing contiguous homozygous segments (runs of homozygosity, ROH), which are inferred to be homozygous along their complete length. Given the low levels of genome-wide homozygosity prevalent in most human populations, information is required on very large numbers of people to provide sufficient power3,4. Here we use ROH to study 16 health-related quantitative traits in 354,224 individuals from 102 cohorts and find statistically significant associations between summed runs of homozygosity (SROH) and four complex traits: height, forced expiratory lung volume in 1 second (FEV1), general cognitive ability (g) and educational attainment (nominal p<1 × 10−300, 2.1 × 10−6, 2.5 × 10−10, 1.8 × 10−10). In each case increased homozygosity was associated with decreased trait value, equivalent to the offspring of first cousins being 1.2 cm shorter and having 10 months less education. Similar effect sizes were found across four continental groups and populations with different degrees of genome-wide homozygosity, providing convincing evidence for the first time that homozygosity, rather than confounding, directly contributes to phenotypic variance. Contrary to earlier reports in substantially smaller samples5,6, no evidence was seen of an influence of genome-wide homozygosity on blood pressure and low density lipoprotein (LDL) cholesterol, or ten other cardio-metabolic traits. Since directional dominance is predicted for traits under directional evolutionary selection7, this study provides evidence that increased stature and cognitive function have been positively selected in human evolution, whereas many important risk factors for late-onset complex diseases may not have been

    New genetic loci link adipose and insulin biology to body fat distribution.

    Get PDF
    Body fat distribution is a heritable trait and a well-established predictor of adverse metabolic outcomes, independent of overall adiposity. To increase our understanding of the genetic basis of body fat distribution and its molecular links to cardiometabolic traits, here we conduct genome-wide association meta-analyses of traits related to waist and hip circumferences in up to 224,459 individuals. We identify 49 loci (33 new) associated with waist-to-hip ratio adjusted for body mass index (BMI), and an additional 19 loci newly associated with related waist and hip circumference measures (P < 5 × 10(-8)). In total, 20 of the 49 waist-to-hip ratio adjusted for BMI loci show significant sexual dimorphism, 19 of which display a stronger effect in women. The identified loci were enriched for genes expressed in adipose tissue and for putative regulatory elements in adipocytes. Pathway analyses implicated adipogenesis, angiogenesis, transcriptional regulation and insulin resistance as processes affecting fat distribution, providing insight into potential pathophysiological mechanisms

    Multi directional hysteretic damper with adaptive post-elastic stiffness for seismic protection of bridges in near fault zones

    No full text
    A new hysteretic damper for seismic protection of highway bridges is presented. The Multidirectional Torsional Hysteretic Damper (MTHD) works based on torsional yielding of steel cylindrical cores. The device demonstrates a hyperbolic post-elastic stiffness as a result of its special working mechanism which produces this geometric hardening effect. The post-elastic stiffness was found to be effective in limiting the lateral displacement of the seismic-isolated bridge decks in near-fault. Results of nonlinear time history analyses revealed the adaptive behavior of the device which is a result of this gradual hardening feature, such that at lower displacements (DBE), force levels are close to a regular system while at highest levels of displacements (MCE), the device hardens to make the substructure yield and limit deck's displacement

    Multi directional hysteretic damper with adaptive post-elastic stiffness for seismic protection of bridges in near fault zones

    No full text
    A new hysteretic damper for seismic protection of highway bridges is presented. The Multidirectional Torsional Hysteretic Damper (MTHD) works based on torsional yielding of steel cylindrical cores. The device demonstrates a hyperbolic post-elastic stiffness as a result of its special working mechanism which produces this geometric hardening effect. The post-elastic stiffness was found to be effective in limiting the lateral displacement of the seismic-isolated bridge decks in near-fault. Results of nonlinear time history analyses revealed the adaptive behavior of the device which is a result of this gradual hardening feature, such that at lower displacements (DBE), force levels are close to a regular system while at highest levels of displacements (MCE), the device hardens to make the substructure yield and limit deck's displacement

    An innovative hysteretic damper with adaptive post-elastic stiffness for seismic protection of bridges

    No full text
    A new hysteretic damper for seismic protection of highway bridges is presented. The Multi-directional Torsional Hysteretic Damper (MTHD) works based on torsional yielding of steel cylindrical cores. The device demonstrates a hyperbolic post-elastic stiffness as a result of its special working mechanism which produces this geometric hardening effect. The post-elastic stiffness was found to be effective in limiting the lateral displacement of the seismic-isolated bridge decks in near-fault. Results of nonlinear time history analyses revealed the adaptive behavior of the device which is a result of this gradual hardening feature, such that at lower displacements in Design-Basis Earthquake (DBE), force levels are close to a regular system while at highest levels of displacements in Maximum Considered Earthquake (MCE), the device hardens to make the substructure yield and limit deck's displacement
    corecore