Optimal design for active damping in sandwich structures using the Direct MultiSearch method

This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization

Identificação de parâmetros elásticos e piezoelétricos em estruturas activas tipo placa : técnicas de optimização clássica versus redes neuronais artificiais

Neste trabalho são apresentados dois métodos não destrutivos para a identificação de parâmetros elásticos e piezoeléctricos em estruturas laminadas activas do tipo placa, com sensores/actuadores de superfície. O primeiro destes métodos resolve o problema inverso através de métodos de optimização clássica, minimizando a diferença entre frequências naturais experimentais e as fornecidas por um modelo de elementos finitos. O segundo método baseia-se na construção de um “meta-modelo” do problema inverso, recorrendo a Redes Neuronais Artificiais. Os dois métodos são comparados recorrendo a resultados experimentais de uma placa em vibração livre

A numerical-experimental method for damage location based on rotation fields spatial differentiation

This paper presents a structural damage location method that decreases the number of spatial differentiations needed to compute modal curvature fields. The method is numerically and experimentally applied to isotropic and laminated rectangular plates, respectively. A speckle shear interferometer is used to measure the rotation fields of the laminated plate, while the isotropic plate is analysed by finite elements. It was found that the Gaussian differentiation is the most suited technique to compute the curvature fields. It is also demonstrated the superior performance of the curvature method using measured rotation fields instead of measured displacement fields

Damage localization in laminated composite plates using double pulse-electronic holographic interferometry

One method for the damage localization of impact damage in laminated composite plates, based on their vibrational characteristics, is presented in this paper. This method uses double pulse-electronic holographic interferometry for mode shapes acquisition and the differences in curvatures. The rotations and curvatures are numerically obtained. The method is applied to a carbon fibre reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows for the localization of both cases of damage, which can be undetected by visual, X-ray or C-Scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode

Damage localization in laminated composite plates using mode shapes measured by pulsed TV holography

Three methods for the damage localization of impact damage in laminated composite plates, based on their vibrational characteristics, are presented in this paper. These methods use double pulse TV holography with acoustic excitation for mode shapes acquisition and the differences in translations, rotations and curvatures. The rotations and curvatures are obtained by numerical differentiation of mode shapes translations using a differentiation/smoothing technique. The methods are applied to a carbon fiber reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows the localization of both cases of damage, which can be undetected by visual, X-ray or C-scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode.Three methods for the damage localization of impact damage in laminated composite plates, based on their vibrational characteristics, are presented in this paper. These methods use double pulse TV holography with acoustic excitation for mode shapes acquisition and the differences in translations, rotations and curvatures. The rotations and curvatures are obtained by numerical differentiation of mode shapes translations using a differentiation/smoothing technique. The methods are applied to a carbon fiber reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows the localization of both cases of damage, which can be undetected by visual, X-ray or C-scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode

Epidemiological status of bovine brucellosis in the State of Minas Gerais, Brazil

Realizou-se um estudo para caracterizar a situação epidemiológica da brucelose bovina no Estado de Minas Gerais. O Estado foi estratificado em sete circuitos produtores. Em cada circuito foram amostradas aleatoriamente cerca de 300 propriedades e, dentro dessas, foi escolhido, de forma aleatória, um número pré-estabelecido de animais, dos quais foi obtida uma amostra de sangue. No total, foram amostrados 20.643 animais, provenientes de 2.204 propriedades. Em cada propriedade visitada aplicou-se um questionário epidemiológico para verificar o tipo de exploração e as práticas zootécnicas e sanitárias que poderiam estar associadas ao risco de infecção pela doença. O protocolo de testes utilizado foi o da triagem com o teste do antígeno acidificado tamponado e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo, se pelo menos um animal foi reagente às duas provas sorológicas. As prevalências de focos e de animais infectados do Estado foram de 6,0% [5,0-7,1%] e 1,1% [0,78-1,4%], respectivamente. Os resultados para os circuitos pecuários da prevalência de focos e de animais foram: circuito 1, 4,7% [2,7-7,7%] e 0,82% [0,06-1,6%]; circuito 2, 7,2% [4,6-10,6%] e 1,2% [0,53-1,8%]; circuito 3, 6,8% [4,3-10,0%] e 1,5% [0,47-2,4%]; circuito 4, 6,5% [4,1-9,8%] e 1,1% [0,39-1,7%]; circuito 5, 3,8% [2,0-6,5%] e 0,40% [0,11-0,69%]; circuito 6, 6,2% [3,8-9,6%] e 0,66% [0,29-1,0%]; circuito 7, 11,0% [7,7-15,0%] e 1,7% [0,92-2,6%], respectivamente. Os fatores de risco (odds ratio, OR) associados à condição de foco foram: compra de reprodutores (OR = 1,66 [1,13-2,44]), ocorrência de aborto nos últimos 12 meses (OR = 1,81 [1,26-2,60]) e presença de cervídeos na propriedade (OR = 1,56 [1,08-2,27]). A vacinação contra brucelose foi identificada como fator protetor (OR = 0,38 [0,19-0,79]). Concluiu-se que o programa obrigatório de vacinação de bezerras, iniciado na década de 1990, está sendo eficaz ao reduzir a prevalência em todo o Estado e em todos os sistemas de produção animal. As autoridades sanitárias devem priorizar o controle da compra de animais para reprodução, que não apresentem garantias sanitárias e incorporar essa medida às ações de educativas. ___________________________________________________________________________________________________________ ABSTRACTA study to characterize the epidemiological status of brucellosis was carried out in the State of Minas Gerais. The State was divided in seven regions. Three hundred herds were randomly sampled in each region and a pre-established number of animals was sampled in each of these herds. A total of 20,643 serum samples from 2,204 herds were collected. In each herd, it was applied an epidemiological questionnaire focused on herd traits as well as husbandry and sanitary practices that could be associated with the risk of infection. The serum samples were screened for antibodies against Brucella spp. by the Rose-Bengal Test (RBT), and all positive sera were re-tested by the 2-mercaptoethanol test (2-ME). The herd was considered positive if at least one animal was positive on both RBT and 2-ME tests. The prevalence of infected herds and animals in the State were, respectively, 6.0% [5.0-7.1%] and 1.1% [0.78-1.4%]. In the productive regions, the prevalence of infected herds and animals were, respectively: regions 1, 4.7% [2.7-7.7%] and 0.82% [0.06-1.6%]; region 2, 7.2% [4.6-10.6%] and 1.2% [0.53-1.8%]; region 3, 6.8% [4.3-10.0%] and 1.5% [0.47-2.4%]; region 4, 6.5% [4.1-9.8%] and 1.1% [0.39-1.7%]; region 5, 3.8% [2.0-6.5%] and 0.40% [0.11-0.69%]; region 6, 6.2% [3.8-9.6%] and 0.66% [0.29-1.0%]; and region 7, 11.0% [7.7-15.0%] and 1.7% [0.92-2.6%]. The risk factors (odds ratio, OR) associated with positive herds were: purchase of breeding stock (OR = 1.66 [1.13-2.44]), occurrence of abortions over the last 12 months (OR = 1.81 [1.26-2.60]), and the presence of deer in the farm (OR = 1.56 [1.08-2.27]). Vaccination against brucellosis was a protective factor (OR = 0.38 [0.19-0.79]). It can be concluded that the compulsory vaccination of heifers, commenced in the 90's, was successful in reducing the prevalence of bovine brucellosis throughout the state and across livestock production systems. The animal health authorities should give priority to controlling the purchase of breeding stock without sanitary assurances and integrate this issue into the educational programmes

Green manure in coffee systems in the region of Zona da Mata, Minas Gerais: characteristics and kinetics of carbon and nitrogen mineralization.

The use of green manure may contribute to reduce soil erosion and increase the soil organic matter content and N availability in coffee plantations in the Zona da Mata, State of Minas Gerais, in Southeastern Brazil. The potential of four legumes (A. pintoi, C. mucunoides, S. aterrimum and S. guianensis)to produce above-ground biomass, accumulate nutrients and mineralize N was studied in two coffee plantations of subsistence farmers under different climate conditions. The biomass production of C. mucunoides was influenced by the shade of the coffee plantation.C. mucunoides tended to mineralize more N than the other legumes due to the low polyphenol content and polyphenol/N ratio. In the first year, the crop establishment of A. pintoi in the area took longer than of the other legumes, resulting in lower biomass production and N2 fixation. In the long term, cellulose was the main factor controlling N mineralization. The biochemical characteristics, nutrient accumulation and biomass production of the legumes were greatly influenced by the altitude and position of the area relative to the sun

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Genotype-specific growth and proteomic responses of maize toward salt stress

Salt stress in plants triggers complex physiological responses that are genotype specific. Many of these responses are either not yet described or not fully understood or both. In this work, we phenotyped three maize genotypes of the CIMMYT gene bank alongside the reference B73 genotype (NCRPIS – United States) under both control and salt-stressed conditions. We have ranked their growth potential and we observed significant differences in Na+ and Cl- ion accumulation. Genotype CML421 showed the slowest growth, while CML451 had the lowest accumulation of ions in its leaves. The phenotyping defined the right timing for the proteomics analysis, allowing us to compare the contrasting genotypes. In general 1,747 proteins were identified, of which 209 were significantly more abundant in response to salt stress. The five most significantly enriched annotations that positively correlated with stress were oxidation reduction, catabolic process, response to chemical stimulus, translational elongation and response to water. We observed a higher abundance of proteins involved in reactions to oxidative stress, dehydration, respiration, and translation. The five most significantly enriched annotations negatively correlated with stress were nucleosome organization, chromatin assembly, protein-DNA complex assembly, DNA packaging and nucleosome assembly. The genotypic analysis revealed 52 proteins that were correlated to the slow-growing genotype CML421. Their annotations point toward cellular dehydration and oxidative stress. Three root proteins correlated to the CML451 genotype were annotated to protein synthesis and ion compartmentalization. In conclusion, our results highlight the importance of the anti-oxidative system for acclimatization to salt stress and identify potential genotypic marker proteins involved in salt-stress responses