Synergistic Antibacterial Effects of Metallic Nanoparticle Combinations

© The Author(s) 2019.Metallic nanoparticles have unique antimicrobial properties that make them suitable for use within medical and pharmaceutical devices to prevent the spread of infection in healthcare. The use of nanoparticles in healthcare is on the increase with silver being used in many devices. However, not all metallic nanoparticles can target and kill all disease-causing bacteria. To overcome this, a combination of several different metallic nanoparticles were used in this study to compare effects of multiple metallic nanoparticles when in combination than when used singly, as single elemental nanoparticles (SENPs), against two common hospital acquired pathogens (Staphylococcus aureus and Pseudomonas. aeruginosa). Flow cytometry LIVE/DEAD assay was used to determine rates of cell death within a bacterial population when exposed to the nanoparticles. Results were analysed using linear models to compare effectiveness of three different metallic nanoparticles, tungsten carbide (WC), silver (Ag) and copper (Cu), in combination and separately. Results show that when the nanoparticles are placed in combination (NPCs), antimicrobial effects significantly increase than when compared with SENPs (P < 0.01). This study demonstrates that certain metallic nanoparticles can be used in combination to improve the antimicrobial efficiency in destroying morphologically distinct pathogens within the healthcare and pharmaceutical industry.Peer reviewe

Etiology of Severe Non-malaria Febrile Illness in Northern Tanzania: A Prospective Cohort Study.

The syndrome of fever is a commonly presenting complaint among persons seeking healthcare in low-resource areas, yet the public health community has not approached fever in a comprehensive manner. In many areas, malaria is over-diagnosed, and patients without malaria have poor outcomes. We prospectively studied a cohort of 870 pediatric and adult febrile admissions to two hospitals in northern Tanzania over the period of one year using conventional standard diagnostic tests to establish fever etiology. Malaria was the clinical diagnosis for 528 (60.7%), but was the actual cause of fever in only 14 (1.6%). By contrast, bacterial, mycobacterial, and fungal bloodstream infections accounted for 85 (9.8%), 14 (1.6%), and 25 (2.9%) febrile admissions, respectively. Acute bacterial zoonoses were identified among 118 (26.2%) of febrile admissions; 16 (13.6%) had brucellosis, 40 (33.9%) leptospirosis, 24 (20.3%) had Q fever, 36 (30.5%) had spotted fever group rickettsioses, and 2 (1.8%) had typhus group rickettsioses. In addition, 55 (7.9%) participants had a confirmed acute arbovirus infection, all due to chikungunya. No patient had a bacterial zoonosis or an arbovirus infection included in the admission differential diagnosis. Malaria was uncommon and over-diagnosed, whereas invasive infections were underappreciated. Bacterial zoonoses and arbovirus infections were highly prevalent yet overlooked. An integrated approach to the syndrome of fever in resource-limited areas is needed to improve patient outcomes and to rationally target disease control efforts

Pharmaceutical electrochemistry: the electrochemical detection of aspirin utilising screen printed graphene electrodes as sensors platforms.

A sensitive electrochemical sensor was designed for acetyl salicylic acid detection using graphene modified Screen Printed Electrodes. The electrochemical response of the sensor with graphene was improved compared to Screen Printed Electrodes without graphene and displayed an excellent analytical performance for the detection of acetyl salicylic acid. The high acetyl salicylic acid loading capacity on the electrode surface and the outstanding electric conductivity of graphene were also discussed in this manuscript. When a range of different concentrations of acetyl salicylic acid from 0.1 to 100 μM into a pH 4 buffer solution (N defined as the sample size N = 9) were plotted against the oxidation peak a linear response was observed. The detection limit was found to be 0.09 μM based on (3-σ/slope). Screen Printed Graphene electrodes sensors methodology is shown to be useful for quantifying low levels of acetyl salicylic acid in a buffer solution as well as in biological matrixes such as human oral fluid. A linear response was obtained over a range of concentrations from 10 to 150 μM into a human oral fluid solution (N = 10) giving a detection limit of 8.7 μM

Cost-Effectiveness of Pooled Nucleic Acid Amplification Testing for Acute HIV Infection after Third-Generation HIV Antibody Screening and Rapid Testing in the United States: A Comparison of Three Public Health Settings

Angela Hutchinson and colleagues conducted a cost-effectiveness analysis of pooled nucleic acid amplification testing following HIV testing and show that it is not cost-effective at recommended antibody testing intervals for high-risk persons except in very high-incidence settings

Malaria is an uncommon cause of adult sepsis in south-western Uganda

Malaria is often considered a cause of adult sepsis in malaria endemic areas. However, diagnostic limitations can make distinction between malaria and other infections challenging. Therefore, the objective of this study was to determine the relative contribution of malaria to adult sepsis in south-western Uganda

Down-regulation of IRES containing 5'UTR of HCV genotype 3a using siRNAs

<p>Abstract</p> <p>Background</p> <p>Hepatitis C virus (HCV) is a major causative agent of liver associated diseases leading to the development of hepatocellular carcinoma (HCC) all over the world and genotype-3a responsible for most of the cases in Pakistan. Due to the limited efficiency of current chemotherapy of interferon-α (IFN-α) and ribavirin against HCV infection alternative options are desperately needed out of which the recently discovered RNAi represent a powerful silencing approach for molecular therapeutics through a sequence-specific RNA degradation process to silence virus infection or replication. HCV translation is mediated by a highly conserved internal ribosome entry site (IRES) within the 5'UTR region making it a relevant target for new drug development.</p> <p>Materials and methods</p> <p>The present study was proposed to assess and explore the possibility of HCV silencing using siRNA targeting 5'UTR. For this analysis full length HCV 5'UTR of HCV-3a (pCR3.1/5'UTR) was tagged with GFP protein for <it>in vitro </it>analysis in Huh-7 cells. siRNA targeting 5'UTR were designed, and tested against constructed vector in Huh-7 cell line both at RNA and Protein levels. Furthermore, the effect of these siRNAs was confirmed in HCV-3a serum infected Huh-7 cell line.</p> <p>Results</p> <p>The expression of 5'UTR-GFP was dramatically reduced both at mRNA and protein levels as compared with Mock transfected and control siRNAs treated cells using siRNAs against IRES of HCV-3a genotype. The potential of siRNAs specificity to inhibit HCV-3a replication in serum-infected Huh-7 cells was also investigated; upon treatment with siRNAs a significant decrease in HCV viral copy number and protein expression was observed.</p> <p>Conclusions</p> <p>Overall, the present work of siRNAs against HCV 5'UTR inhibits HCV-3a expression and represents effective future therapeutic opportunities against HCV-3a genotype.</p

Measurement of the cross-section of high transverse momentum vector bosons reconstructed as single jets and studies of jet substructure in pp collisions at √s = 7 TeV with the ATLAS detector

This paper presents a measurement of the cross-section for high transverse momentum W and Z bosons produced in pp collisions and decaying to all-hadronic final states. The data used in the analysis were recorded by the ATLAS detector at the CERN Large Hadron Collider at a centre-of-mass energy of √s = 7 TeV;{\rm Te}{\rm V}$and correspond to an integrated luminosity of$4.6\;{\rm f}{{{\rm b}}^{-1}}$. The measurement is performed by reconstructing the boosted W or Z bosons in single jets. The reconstructed jet mass is used to identify the W and Z bosons, and a jet substructure method based on energy cluster information in the jet centre-of-mass frame is used to suppress the large multi-jet background. The cross-section for events with a hadronically decaying W or Z boson, with transverse momentum${{p}_{{\rm T}}}\gt 320\;{\rm Ge}{\rm V}$and pseudorapidity$|\eta |\lt 1.9$, is measured to be${{\sigma }_{W+Z}}=8.5\pm 1.7$ pb and is compared to next-to-leading-order calculations. The selected events are further used to study jet grooming techniques

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal