Towards biological control of Spongospora subterranea f. sp. subterranea, the causal agent of powdery scab in potato

Powdery scab of potato, caused by the obligate biotrophic protozoan pathogen Spongospora subterranea f.sp. subterranea (Sss), is a major problem in potato growing areas throughout the world. It results in lesions (scabs) on the surface of the tubers which renders them unmarketable. In recent years there has been an increasing number of reports of the disease, many from new areas. Management of the disease has proved difficult and relies on the integrated application of a range of methods. Biocontrol is not currently used for the management of powdery scab although the results of preliminary studies have been encouraging. This review evaluates the potential for developing a biocontrol strategy for powdery scab

Effect of core cross-linking on the physical properties of poly(dimethylsiloxane)-based diblock copolymer worms prepared in silicone oil

A trithiocarbonate-capped poly(dimethylsiloxane) (PDMS) precursor is chain-extended via reversible addition–fragmentation chain transfer dispersion polymerization of 2-(dimethylamino)ethyl methacrylate (DMA) in decamethylcyclopentasiloxane (D5) silicone oil at 90 °C. For a fixed mean degree of polymerization (DP) of 66 for the PDMS steric stabilizer block, targeting core-forming PDMA block DPs of between 105 and 190 enables the preparation of either well-defined worms or vesicles at a copolymer concentration of 25% w/w. The as-synthesized linear PDMS66–PDMA100 worms exhibit thermoresponsive behavior in D5, undergoing a worm-to-sphere transition on heating to 100 °C. Variable temperature 1H NMR spectroscopy indicates that this thermal transition is driven by reversible solvent plasticization of the PDMA cores. This change in copolymer morphology is characterized by transmission electron microscopy (TEM) studies, variable temperature dynamic light scattering and small-angle X-ray scattering experiments. Oscillatory rheology studies indicate that degelation occurs at 32 °C, but shear-induced polarized light imaging measurements suggest that full conversion of worms into spheres requires significantly higher temperatures (∼110 °C). 1,2-Bis(2-iodoethoxy)ethane (BIEE) is evaluated as a cross-linker for PDMS66–PDMAx diblock copolymer nano-objects in D5. This bifunctional reagent quaternizes the tertiary amine groups on the DMA residues within the worm cores, introducing cross-links via the Menshutkin reaction. TEM studies confirm that such covalently-stabilized worms no longer undergo a worm-to-sphere transition when heated to 100 °C. Kinetic studies performed on PDMS66–PDMA176 vesicles suggest that cross-linking requires approximately 13 h at 20 °C to ensure that these nano-objects remain intact when dispersed in chloroform, which is a good solvent for both blocks. Oscillatory rheology studies of a PDMS66–PDMA100 worm gel indicated that covalent stabilization using a BIEE/DMA molar ratio of 0.15 increased its dynamic elastic modulus (G′) by almost two orders of magnitude. Furthermore, such cross-linked worms exhibit a much lower critical gelation concentration (∼2% w/w) compared to that of the linear precursor worms (∼12% w/w)

RAFT dispersion polymerization of benzyl methacrylate in silicone oil using a silicone-based methacrylic stabilizer provides convenient access to spheres, worms, and vesicles

Reversible addition–fragmentation chain transfer (RAFT) solution polymerization of 3-[tris(trimethylsiloxy)silyl] propyl methacrylate (SiMA) was conducted in toluene to prepare three PSiMA precursors with mean degrees of polymerization (DP) of 12, 13, or 15. Each precursor was then chain-extended in turn via RAFT dispersion polymerization of benzyl methacrylate (BzMA) in a low-viscosity silicone oil (decamethylcyclopentasiloxane, D5). 1H NMR studies confirmed that such polymerizations were relatively fast, with more than 99% BzMA conversion being achieved within 100 min at 90 °C. Moreover, gel permeation chromatography analysis indicated that these polymerizations were well controlled, with dispersities remaining below 1.25 when targeting PBzMA DPs up to 200. A phase diagram was constructed at a constant copolymer concentration of 20% w/w. Only spherical micelles were accessible when the PSiMA15 stabilizer was utilized, as determined by transmission electron microscopy and small-angle X-ray scattering (SAXS) studies. Nevertheless, these spheres exhibited narrow size distributions and tunable z-average diameters ranging between 19 and 49 nm, as determined by dynamic light scattering. In contrast, spheres, worms, or vesicles could be prepared depending on the target PBzMA DP when utilizing the relatively short PSiMA12 precursor. Moreover, each of these nano-objects could be obtained at copolymer concentrations as low as 5% w/w. To obtain more detailed structural information, these spheres, worms and vesicles were further characterized by SAXS. PSiMA12-PBzMA55 worms formed reasonably transparent free-standing gels when prepared at copolymer concentrations as low as 5% w/w and exhibited an elastic modulus (G′) of 90 Pa at 25 °C, as judged by oscillatory rheology studies. Finally, broadening of the molecular weight distribution was observed during the long-term storage of PSiMA-PBzMA dispersions at ambient temperature. We tentatively suggest that this instability is related to hydroxyl impurities in the SiMA, which leads to cross-linking side reactions. This problem also causes incipient flocculation of the spheres and worms during the long-term storage of such dispersions at 20 °C

Hydrocarbon-based statistical copolymers outperform block copolymers for stabilization of ethanol–water Foams

Well-defined block copolymers have been widely used as emulsifiers, stabilizers, and dispersants in the chemical industry for at least 50 years. In contrast, nature employs amphiphilic proteins as polymeric surfactants whereby the spatial distribution of hydrophilic and hydrophobic amino acids within the polypeptide chains is optimized for surface activity. Herein, we report that polydisperse statistical copolymers prepared by conventional free-radical copolymerization can provide superior foaming performance compared to the analogous diblock copolymers. A series of predominantly (meth)acrylic comonomers are screened to identify optimal surface activity for foam stabilization of aqueous ethanol solutions. In particular, all-acrylic statistical copolymers comprising trimethylhexyl acrylate and poly(ethylene glycol) acrylate, P(TMHA-stat-PEGA), confer strong foamability and also lower the surface tension of a range of ethanol–water mixtures to a greater extent than the analogous block copolymers. For ethanol-rich hand sanitizer formulations, foam stabilization is normally achieved using environmentally persistent silicone-based copolymers or fluorinated surfactants. Herein, the best-performing fully hydrocarbon-based copolymer surfactants effectively stabilize ethanol-rich foams by a mechanism that resembles that of naturally-occurring proteins. This ability to reduce the surface tension of low-surface-energy liquids suggests a wide range of potential commercial applications

Gamma-ray Observations Under Bright Moonlight with VERITAS

Imaging atmospheric Cherenkov telescopes (IACTs) are equipped with sensitive photomultiplier tube (PMT) cameras. Exposure to high levels of background illumination degrades the efficiency of and potentially destroys these photo-detectors over time, so IACTs cannot be operated in the same configuration in the presence of bright moonlight as under dark skies. Since September 2012, observations have been carried out with the VERITAS IACTs under bright moonlight (defined as about three times the night-sky-background (NSB) of a dark extragalactic field, typically occurring when Moon illumination > 35%) in two observing modes, firstly by reducing the voltage applied to the PMTs and, secondly, with the addition of ultra-violet (UV) bandpass filters to the cameras. This has allowed observations at up to about 30 times previous NSB levels (around 80% Moon illumination), resulting in 30% more observing time between the two modes over the course of a year. These additional observations have already allowed for the detection of a flare from the 1ES 1727+502 and for an observing program targeting a measurement of the cosmic-ray positron fraction. We provide details of these new observing modes and their performance relative to the standard VERITAS observations

Use of SMS texts for facilitating access to online alcohol interventions: a feasibility study

A41 Use of SMS texts for facilitating access to online alcohol interventions: a feasibility study In: Addiction Science & Clinical Practice 2017, 12(Suppl 1): A4

Energetic particle influence on the Earth's atmosphere

This manuscript gives an up-to-date and comprehensive overview of the effects of energetic particle precipitation (EPP) onto the whole atmosphere, from the lower thermosphere/mesosphere through the stratosphere and troposphere, to the surface. The paper summarizes the different sources and energies of particles, principally galactic cosmic rays (GCRs), solar energetic particles (SEPs) and energetic electron precipitation (EEP). All the proposed mechanisms by which EPP can affect the atmosphere are discussed, including chemical changes in the upper atmosphere and lower thermosphere, chemistry-dynamics feedbacks, the global electric circuit and cloud formation. The role of energetic particles in Earth’s atmosphere is a multi-disciplinary problem that requires expertise from a range of scientific backgrounds. To assist with this synergy, summary tables are provided, which are intended to evaluate the level of current knowledge of the effects of energetic particles on processes in the entire atmosphere

Search for the production of single vector-like and excited quarks in the Wt final state in pp collisions at √s=8 TeV with the ATLAS detector

A search for vector-like quarks and excited quarks in events containing a top quark and a W boson in the final state is reported here. The search is based on 20.3 fb−1 of proton-proton collision data taken at the LHC at a centre-of-mass energy of 8 TeV recorded by the ATLAS detector. Events with one or two leptons, and one, two or three jets are selected with the additional requirement that at least one jet contains a b-quark. Single-lepton events are also required to contain at least one large-radius jet from the hadronic decay of a high-pTW boson or a top quark. No significant excess over the expected background is observed and upper limits on the cross-section times branching ratio for different vector-like quark and excited-quark model masses are derived. For the excited-quark production and decay to Wt with unit couplings, quarks with masses below 1500 GeV are excluded and coupling-dependent limits are set