Revisiting Mt. Fuji's groundwater origins with helium, vanadium and eDNA tracers

Known locally as the water mountain , for millennia Japan's iconic Mt. Fuji has provided safe drinking water to millions of people via a vast network of groundwater and freshwater springs. Groundwater, which is recharged at high elevations, flows down Fuji's flanks within three basaltic aquifers, ultimately forming countless pristine freshwater springs along Fuji's foothills. Here, we challenge the current conceptual model of Fuji being a simple system of laminar groundwater flow with little to no vertical exchange between its three aquifers. This model contrasts strongly with Fuji's extreme tectonic instability due to its unique location on top of the only known continental trench-trench-trench triple junction, its complex geology, and its unusual microbial spring water communities. Based on a unique combination of microbial environmental DNA (eDNA), vanadium, and helium tracers, we provide evidence for prevailing deep circulation and previously unknown deep groundwater contribution to Fuji's freshwater springs. The most substantial deep groundwater upwelling has been found along Japan's tectonically most active Fujikawa-kako Fault Zone. Our findings broaden the hydrogeological understanding of Fuji and demonstrate the vast potential of combining eDNA, on-site noble gas, and trace element analyses for groundwater science

Inter-calibration of a proposed new primary reference standard AA-ETH Zn for zinc isotopic analysis

We have prepared a large volume of pure, concentrated and homogenous zinc standard solution. This new standard solution is intended to be used as a primary reference standard for the zinc isotope community, and to serve as a replacement for the nearly exhausted current reference standard, the so-called JMC-Lyon Zn. The isotopic composition of this new zinc standard (AA-ETH Zn) has been determined through an inter-laboratory calibration exercise, calibrated against the existing JMC-Lyon standard, as well as the certified Zn reference standard IRMM-3702. The data show that the new standard is isotopically indistinguishable from the IRMM-3702 zinc standard, with a weighted δ66/64Zn value of 0.28 ± 0.02‰ relative to JMC-Lyon. We suggest that this new standard be assigned a δ66/64Zn value of +0.28‰ for reporting of future Zn isotope data, with the rationale that all existing published Zn isotope data are presented relative to the JMC-Lyon standard. Therefore our proposed presentation allows for a direct comparison with all previously published data, and that are directly traceable to a certified reference standard, IRMM-3702 Zn. This standard will be made freely available to all interested labs through contact with the corresponding author

GEOTRACES IC1 (BATS) contamination-prone trace element isotopes Cd, Fe, Pb, Zn, Cu, and Mo intercalibration

International audienceWe report data on the isotopic composition of cadmium, copper, iron, lead, zinc, and molybdenum at the GEOTRACES IC1 BATS Atlantic intercalibration station. In general, the between lab and within-lab precisions are adequate to resolve global gradients and vertical gradients at this station for Cd, Fe, Pb, and Zn. Cd and Zn isotopes show clear variations in the upper water column and more subtle variations in the deep water; these variations are attributable, in part, to progressive mass fractionation of isotopes by Rayleigh distillation from biogenic uptake and/or adsorption. Fe isotope variability is attributed to heavier crustal dust and hydrothermal sources and light Fe from reducing sediments. Pb isotope variability results from temporal changes in anthropogenic source isotopic compositions and the relative contributions of U.S. and European Pb sources. Cu and Mo isotope variability is more subtle and close to analytical precision. Although the present situation is adequate for proceeding with GEOTRACES, it should be possible to improve the within-lab and between-lab precisions for some of these properties

Biogeochemical iron budgets of the Southern Ocean south of Australia : decoupling of iron and nutrient cycles in the subantarctic zone by the summertime supply

Author Posting. © American Geophysical Union, 2009. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Global Biogeochemical Cycles 23 (2009): GB4034, doi:10.1029/2009GB003500.Climate change is projected to significantly alter the delivery (stratification, boundary currents, aridification of landmasses, glacial melt) of iron to the Southern Ocean. We report the most comprehensive suite of biogeochemical iron budgets to date for three contrasting sites in subantarctic and polar frontal waters south of Australia. Distinct regional environments were responsible for differences in the mode and strength of iron supply mechanisms, with higher iron stocks and fluxes observed in surface northern subantarctic waters, where atmospheric iron fluxes were greater. Subsurface waters southeast of Tasmania were also enriched with particulate iron, manganese and aluminum, indicative of a strong advective source from shelf sediments. Subantarctic phytoplankton blooms are thus driven by both seasonal iron supply from southward advection of subtropical waters and by wind-blown dust deposition, resulting in a strong decoupling of iron and nutrient cycles. We discuss the broader global significance our iron budgets for other ocean regions sensitive to climate-driven changes in iron supply.T.W. was supported by a BDI grant from CNRS and Région PACA, by CNRS PICS project 3604, and by the “Soutien à la mer” CSOA CNRS-INSU. P.W.B. was supported by the New Zealand FRST Coasts and Oceans OBI. This research was supported by the Australian Government Cooperative Research Centres Programme through the Antarctic Climate and Ecosystems CRC (ACE CRC) and Australian Antarctic Science project 2720

Insights Into the Biogeochemical Cycling of Iron, Nitrate, and Phosphate Across a 5,300 km South Pacific Zonal Section (153°E–150°W)

Iron, phosphate and nitrate are essential nutrients for phytoplankton growth and hence their supply into the surface ocean controls oceanic primary production. Here, we present a GEOTRACES zonal section (GP13; 30-33oS, 153oE-150oW) extending eastwards from Australia to the oligotrophic South Pacific Ocean gyre outlining the concentrations of these key nutrients. Surface dissolved iron concentrations are elevated at >0.4 nmol L-1 near continental Australia (west of 165°E) and decreased eastward to ≤0.2 nmol L-1 (170oW-150oW). The supply of dissolved iron into the upper ocean (<100m) from the atmosphere and vertical diffusivity averaged 11 ±10 nmol m-2 d-1. In the remote South Pacific Ocean (170oW-150oW) atmospherically sourced iron is a significant contributor to the surface dissolved iron pool with average supply contribution of 23 ± 17% (range 3% to 55%). Surface-water nitrate concentrations averaged 5 ±4 nmol L-1 between 170oW and 150oW whilst surface-water phosphate concentrations averaged 58 ±30 nmol L-1. The supply of nitrogen into the upper ocean is primarily from deeper waters (24-1647 μmol m-2 d-1) with atmospheric deposition and nitrogen fixation contributing <1% to the overall flux, in remote South Pacific waters. The deep water N:P ratio averaged 16 ±3 but declined to <1 above the deep chlorophyll maximum (DCM) indicating a high N:P assimilation ratio by phytoplankton leading to almost quantitative removal of nitrate. The supply stoichiometry for iron and nitrogen relative to phosphate at and above the DCM declines eastward leading to two biogeographical provinces: one with diazotroph production and the other without diazotroph production

Effects of African dust deposition on phytoplankton in the western tropical Atlantic Ocean off Barbados

Bioassay incubation experiments conducted with nutrients and local atmospheric aerosol amendments indicate that phosphorus (P) availability limited phytoplankton growth in the low-nutrient low-chlorophyll (LNLC) ocean off Barbados. Atmospheric deposition provides a relatively large influx of new nutrients and trace metals to the surface ocean in this region in comparison to other nutrient sources. However, the impact on native phytoplankton is muted due to the high ratio of nitrogen (N) to P (NO3:SRP > 40) and the low P solubility of these aerosols. Atmospheric deposition induces P limitation in this LNLC region by adding more N and iron (Fe) relative to P. This favors the growth of Prochlorococcus, a genus characterized by low P requirements and highly efficient P acquisition mechanisms. A global three-dimensional marine ecosystem model that includes species-specific phytoplankton elemental quotas/stoichiometry and the atmospheric deposition of N, P, and Fe supports this conclusion. Future increases in aerosol N loading may therefore influence phytoplankton community structure in other LNLC areas, thereby affecting the biological pump and associated carbon sequestration

The GEOTRACES Intermediate Data Product 2014

The GEOTRACES Intermediate Data Product 2014 (IDP2014) is the first publicly available data product of the international GEOTRACES programme, and contains data measured and quality controlled before the end of 2013. It consists of two parts: (1) a compilation of digital data for more than 200 trace elements and isotopes (TEIs) as well as classical hydrographic parameters, and (2) the eGEOTRACES Electronic Atlas providing a strongly inter-linked on-line atlas including more than 300 section plots and 90 animated 3D scenes. The IDP2014 covers the Atlantic, Arctic, and Indian oceans, exhibiting highest data density in the Atlantic. The TEI data in the IDP2014 are quality controlled by careful assessment of intercalibration results and multi-laboratory data comparisons at cross-over stations. The digital data are provided in several formats, including ASCII spreadsheet, Excel spreadsheet, netCDF, and Ocean Data View collection. In addition to the actual data values the IDP2014 also contains data quality flags and 1-? data error values where available. Quality flags and error values are useful for data filtering. Metadata about data originators, analytical methods and original publications related to the data are linked to the data in an easily accessible way. The eGEOTRACES Electronic Atlas is the visual representation of the IDP2014 data providing section plots and a new kind of animated 3D scenes. The basin-wide 3D scenes allow for viewing of data from many cruises at the same time, thereby providing quick overviews of large-scale tracer distributions. In addition, the 3D scenes provide geographical and bathymetric context that is crucial for the interpretation and assessment of observed tracer plumes, as well as for making inferences about controlling processes

Seasonal variation in total organic carbon in the northeast Atlantic in 2000-2001

International audienceTotal organic carbon (TOC) was measured in the midlatitudes of the northeast Atlantic in 2000-2001 during the Programme Océan Multidisciplinaire Méso Echelle (POMME). In spring, mixed layer depth (MLD) was positively correlated with the north latitude, while the surface TOC and chlorophyll-a (Chl a) were negatively correlated with it. It indicates the northward propagation of TOC accumulation along the onset of spring bloom, which was triggered by shoaling of MLD from the south. Surface TOC was highest in summer, though surface Chl a was lowest. Surface TOC was significantly correlated with surface Chl a during winter and spring but not during summer or fall, indicating the minor influence of total phytoplankton biomass on surface TOC distribution in the oligotrophic season. High surface TOC in summer and fall was related with shallow MLD, which could hold fresh TOC near the surface. Downward TOC flux from the surface to below the seasonal thermocline was estimated for the processes of winter convection (F c ), turbulent diffusion (F d ) and sinking flux (F p ). The sum of these fluxes accounts for 6-75% of annual new production. To our knowledge, this is the first estimation based on the simultaneous measurement of F c , F d , F p , and annual new production