The Stress-Corrosion Cracking of Austentic Stainless Steels in Aqueous Chloride Solution

The stress-corrosion cracking of 18-8 type steels in hot concentrated magnesium chloride solutionshas been studied. There is an induction period, of which the processes are substantially unaffected hvv stress, followed by a period of rapid crack propagation - as shown by measurements of the electrode potential, the mechanical properties and the extension of direct-loaded wire specimens. The indu-ction period is shortened by increase of applied stress and of temperature, and by cold-work on a fully softened material; it may he indefinitely lengthened by cathodic protection of the metal. Crack propagation is normally at rates of 1-4 mm./hr. ; it is not greatly influenced by increase of applied stress, is somewhat accelerated by increase of temperature, and may be slowed down or stopped cntirely by cathodic protection

Development of an occupational airborne chemical exposure matrix

Background Population-based studies of the occupational contribution to chronic obstructive pulmonary disease generally rely on self-reported exposures to vapours, gases, dusts and fumes (VGDF), which are susceptible to misclassification. Aims To develop an airborne chemical job exposure matrix (ACE JEM) for use with the UK Standard Occupational Classification (SOC 2000) system. Methods We developed the ACE JEM in stages: (i) agreement of definitions, (ii) a binary assignation of exposed/not exposed to VGDF, fibres or mists (VGDFFiM), for each of the individual 353 SOC codes and (iii) assignation of levels of exposure (L; low, medium and high) and (iv) the proportion of workers (P) likely to be exposed in each code. We then expanded the estimated exposures to include biological dusts, mineral dusts, metals, diesel fumes and asthmagens. \ud Results We assigned 186 (53%) of all SOC codes as exposed to at least one category of VGDFFiM, with 23% assigned as having medium or high exposure. We assigned over 68% of all codes as not being exposed to fibres, gases or mists. The most common exposure was to dusts (22% of codes with >50% exposed); 12% of codes were assigned exposure to fibres. We assigned higher percentages of the codes as exposed to diesel fumes (14%) compared with metals (8%). Conclusions We developed an expert-derived JEM, using a strict set of a priori defined rules. The ACE JEM could also be applied to studies to assess risks of diseases where the main route of occupational exposure is via inhalation

Atrazine and cancer incidence among pesticide applicators in the agricultural health study (1994-2007).

Atrazine is a triazine herbicide used widely in the United States. Although it is an animal carcinogen, the mechanism in rodents does not appear to operate in humans. Few epidemiologic studies have provided evidence for an association

Strain–energy method for determining residual stresses in anodised thin films

Residual stresses in thin films are usually evaluated either by measurement of elastic strains in the film or from the curvature or deflection of a film-coated substrate material (the Stoney technique). Both methods are prone to serious measurement errors particularly for thinner films or smaller curvatures or deflections. The Stoney technique is popular because the analysis does not require the elastic modulus of the film. However, residual stress can be determined more accurately using the film modulus. A simple strain-energy analysis using this modulus has been developed to investigate residual stresses in boric acid-sulphuric acid (BSA) anodized films, based on bending measurements of thin coupons. The method is an improvement over Stoney’s equation because the square root of the thickness of the film, rather than the thickness itself, is involved, so reducing one of the larger sources of error. The modulus of the film was determined from nanoindentation measurements. The strain-energy method allows analysis of residual stress development in the coupons as functions of film thickness and time. The results show that the residual stress in BSA-anodized films formed on high strength Al-Cu alloy is highly tensile with stress levels up to 400 MPa. The effects of coupon geometry on stress development were also studied and were found to influence the final levels of residual stress developed. These results have implications for the measurement of residual stresses by beam deflection methods

<i>Gaia</i> Data Release 1. Summary of the astrometric, photometric, and survey properties

Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7. Aims. A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release. Methods. The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue. Results. Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the HIPPARCOS and Tycho-2 catalogues – a realisation of the Tycho-Gaia Astrometric Solution (TGAS) – and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of ∼3000 Cepheid and RR-Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr−1 for the proper motions. A systematic component of ∼0.3 mas should be added to the parallax uncertainties. For the subset of ∼94 000 HIPPARCOS stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr−1. For the secondary astrometric data set, the typical uncertainty of the positions is ∼10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to ∼0.03 mag over the magnitude range 5 to 20.7. Conclusions. Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data

Respiratory symptoms and occupation: a cross-sectional study of the general population

BACKGROUND: This study focused on respiratory symptoms due to occupational exposures in a contemporary general population cohort. Subjects were from the Dutch Monitoring Project on Risk Factors for Chronic Diseases (MORGEN). The composition of this population enabled estimation of respiratory risks due to occupation from the recent past for both men and women. METHODS: The study subjects (aged 20–59) were all inhabitants of Doetinchem, a small industrial town, and came from a survey of a random sample of 1104 persons conducted in 1993. A total of 274 cases with respiratory symptoms (subdivided in asthma and bronchitis symptoms) and 274 controls without symptoms were matched for age and sex. Relations between industry and occupation and respiratory symptoms were explored and adjusted for smoking habits and social economic status. RESULTS: Employment in the 'construction' (OR = 3.38; 95%CI 1.02 – 11.27), 'metal' (OR = 3.17; 95%CI 0. 98 – 10.28), 'rubber, plastics and synthetics' (OR = 6.52; 95%CI 1.26 – 53.80), and 'printing' industry (OR = 3.96; 95%CI 0.85 – 18.48) were positively associated with chronic bronchitis symptoms. In addition, the 'metal' industry was found to be weakly associated with asthma symptoms (OR = 2.59; 95%CI 0.87 – 7.69). Duration of employment within these industries was also positively associated with respiratory symptoms. CONCLUSION: Respiratory symptoms in the general population are traceable to employment in particular industries even in a contemporary cohort with relatively young individuals

Clustering of cancer among families of cases with Hodgkin Lymphoma (HL), Multiple Myeloma (MM), Non-Hodgkin's Lymphoma (NHL), Soft Tissue Sarcoma (STS) and control subjects

<p>Abstract</p> <p>Background</p> <p>A positive family history of chronic diseases including cancer can be used as an index of genetic and shared environmental influences. The tumours studied have several putative risk factors in common including occupational exposure to certain pesticides and a positive family history of cancer.</p> <p>Methods</p> <p>We conducted population-based studies of Hodgkin lymphoma (HL), Multiple Myeloma (MM), non-Hodgkin's Lymphoma (NHL), and Soft Tissue Sarcoma (STS) among male incident case and control subjects in six Canadian provinces. The postal questionnaire was used to collect personal demographic data, a medical history, a lifetime occupational history, smoking pattern, and the information on family history of cancer. The family history of cancer was restricted to first degree relatives and included relationship to the index subjects and the types of tumours diagnosed among relatives. The information was collected on 1528 cases (HL (n = 316), MM (n = 342), NHL (n = 513), STS (n = 357)) and 1506 age ± 2 years and province of residence matched control subjects. Conditional logistic regression analyses adjusted for the matching variables were conducted.</p> <p>Results</p> <p>We found that most families were cancer free, and a minority included two or more affected relatives. HL [(OR_adj(95% CI) <b>1.79 (1.33, 2.42)]</b>, MM <b>(1.38(1.07, 1.78))</b>, NHL <b>(1.43 (1.15, 1.77)</b>), and STS cases <b>(1.30(1.00, 1.68)) </b>had higher incidence of cancer if any first degree relative was affected with cancer compared to control families. Constructing mutually exclusive categories combining "family history of cancer" (yes, no) and "pesticide exposure ≥10 hours per year" (yes, no) indicated that a positive family history was important for HL <b>(2.25(1.61, 3.15))</b>, and for the combination of the two exposures increased risk for MM <b>(1.69(1.14,2.51))</b>. Also, a positive family history of cancer both with <b>(1.72 (1.21, 2.45)) </b>and without pesticide exposure <b>(1.43(1.12, 1.83)) </b>increased risk of NHL.</p> <p>Conclusion</p> <p>HL, MM, NHL, and STS cases had higher incidence of cancer if any first degree relative affected with cancer compared to control families. A positive family history of cancer and/or shared environmental exposure to agricultural chemicals play an important role in the development of cancer.</p

Ethnicity and incidence of Hodgkin lymphoma in Canadian population

<p>Abstract</p> <p>Background</p> <p>Research has shown that ethnicity is a significant predictor of Hodgkin lymphoma (HL). Variations in cancer incidence among ethnic groups in the same country can lead to important information in the search for etiological factors. Other risk factors important in the etiology of HL are medical history and exposure to pesticides. In this report we investigated the association between ethnicity and HL in the presence of medical history, and exposure to pesticides.</p> <p>Methods</p> <p>The data resulting from a matched population-based case-control study conducted in six provinces of Canada (Ontario, Quebec, Manitoba, Saskatchewan, Alberta, and British Columbia) was analyzed to determine whether or not there was any association between ethnicity and incidence of HL when adjusted for personal medical history and pesticide exposure. Information on ethnicity, personal medical history, and pesticide exposure was collected by questionnaires via mail on 316 men diagnosed with HL; and on 1506 controls. A conditional logistic regression was utilized and results were presented as odds ratios and 95% confidence intervals.</p> <p>Results</p> <p>In our study population, the distribution of ethnic groups was: 38.5% North American, 15% British, 8.4% Western European, 8.2% Eastern European, 1.7% Asian, 1.4% Scandinavian and 27% of other ethnic origin. Compared to North Americans (i) the risk of HL was greater among the Eastern European descendents (Odds Ratio (OR_adj): 1.82; 95% confidence interval (CI): 1.02, 3.25) and Western European (OR_adj: 1.62; 95% CI: 0.95–2.76) descent population (borderline significance at 5% level); and (ii) the risk of HL was lower in Asian descents. Diagnosis with measles (OR_adj: 0.72, 95% C.I.: 0.53–0.98) and/or positive history of allergy desensitization shots (OR_adj: 0.55, 95% C.I.: 0.30–0.99) were negatively associated with the incidence of HL, while diagnosis with acne (OR_adj: 2.12, 95% C.I.: 1.19–3.78), shingles (OR_adj: 2.41, 95% C.I.: 1.38–4.22) and positive family history of cancer (OR_adj: 1.93, 95% C.I.: 1.40–2.65) increased the risk of HL. Exposure to individual herbicide dichlorprop showed an increased risk of HL (OR_adj: 6.35, 95% C.I.: 1.56–25.92).</p> <p>Conclusion</p> <p>In Canada, compared to North Americans descendents, the risk of HL was significantly greater among the Eastern European and Western European descent population. Our results related to association between ethnicity and HL support the findings reported by other researchers. Our data showed that subjects who were diagnosed with measles or had allergy desensitization shots negatively associated with the incidence of HL; and other medical conditions, ever diagnosed with acne, and positive family history of cancer were positively associated with the incidence of HL.</p