Thermodynamics of a class of non-asymptotically flat black holes in Einstein-Maxwell-Dilaton theory

We analyse in detail the thermodynamics in the canonical and grand canonical ensembles of a class of non-asymptotically flat black holes of the Einstein-(anti) Maxwell-(anti) Dilaton theory in 4D with spherical symmetry. We present the first law of thermodynamics, the thermodynamic analysis of the system through the geometrothermodynamics methods, Weinhold, Ruppeiner, Liu-Lu-Luo-Shao and the most common, that made by the specific heat. The geometric methods show a curvature scalar identically zero, which is incompatible with the results of the analysis made by the non null specific heat, which shows that the system is thermodynamically interacting, does not possess extreme case nor phase transition. We also analyse the local and global stability of the thermodynamic system, and obtain a local and global stability for the normal case for 0<\gamma<1 and for other values of \gamma, an unstable system. The solution where \gamma=0 separates the class of locally and globally stable solutions from the unstable ones.Comment: 18 pages, version accepted for publication in General Relativity and Gravitatio

Is there evidence for accelerated polyethylene wear in uncemented compared to cemented acetabular components? A systematic review of the literature

Joint arthroplasty registries show an increased rate of aseptic loosening in uncemented acetabular components as compared to cemented acetabular components. Since loosening is associated with particulate wear debris, we postulated that uncemented acetabular components demonstrate a higher polyethylene wear rate than cemented acetabular components in total hip arthroplasty. We performed a systematic review of the peer-reviewed literature, comparing the wear rate in uncemented and cemented acetabular components in total hip arthroplasty. Studies were identified using MEDLINE (PubMed), EMBASE and the Cochrane Central Register of Controlled Trials. Study quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. The search resulted in 425 papers. After excluding duplicates and selection based on title and abstracts, nine studies were found eligible for further analysis: two randomised controlled trials, and seven observational studies. One randomised controlled trial found a higher polyethylene wear rate in uncemented acetabular components, while the other found no differences. Three out of seven observational studies showed a higher polyethylene wear in uncemented acetabular component fixation; the other four studies did not show any differences in wear rates. The available evidence suggests that a higher annual wear rate may be encountered in uncemented acetabular components as compared to cemented components

Biomechanical parameters of the golf swing associated with lower back pain: A systematic review.

Low back pain (LBP) is the most common injury in golfers of all abilities. The primary aim of this review was to improve understanding of human golf swing biomechanics associated with LBP. A systematic review using the PRISMA guidelines was performed. Nine studies satisfying inclusion criteria and dually reporting golf swing biomechanics and LBP were identified. Human golf swing biomechanics potentially associated with LBP include: reduced lumbar flexion velocity; reduced transition phase length; reduced lumbar torsional load; earlier onset of erector spinae contraction; increased lumbar lateral flexion velocity; reduced or greater erector spinae activity; and earlier onset of external oblique contraction. These potential associations were undermined by a very limited and conflicting quality of evidence, study designs which introduced a severe potential for bias and a lack of prospective study design. There is no conclusive evidence to support the commonly held belief that LBP is associated with "poor" golf swing technique. The potential associations identified should be further investigated by prospective studies of robust design, recruiting participants of both sexes and dexterities. Once firm associations have been identified, further research is required to establish how this knowledge can be best integrated into injury prevention and rehabilitation

Search for direct pair production of the top squark in all-hadronic final states in proton-proton collisions at s√=8 TeV with the ATLAS detector

The results of a search for direct pair production of the scalar partner to the top quark using an integrated luminosity of 20.1fb−1 of proton–proton collision data at √s = 8 TeV recorded with the ATLAS detector at the LHC are reported. The top squark is assumed to decay via t˜→tχ˜01 or t˜→ bχ˜±1 →bW(∗)χ˜01 , where χ˜01 (χ˜±1 ) denotes the lightest neutralino (chargino) in supersymmetric models. The search targets a fully-hadronic final state in events with four or more jets and large missing transverse momentum. No significant excess over the Standard Model background prediction is observed, and exclusion limits are reported in terms of the top squark and neutralino masses and as a function of the branching fraction of t˜ → tχ˜01 . For a branching fraction of 100%, top squark masses in the range 270–645 GeV are excluded for χ˜01 masses below 30 GeV. For a branching fraction of 50% to either t˜ → tχ˜01 or t˜ → bχ˜±1 , and assuming the χ˜±1 mass to be twice the χ˜01 mass, top squark masses in the range 250–550 GeV are excluded for χ˜01 masses below 60 GeV

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT

Objectively measured activity behaviours using the ActivPAL accelerometer following robotic and manually performed total knee arthroplasty

\ua9 2025 Clement et al. Aims: To assess whether it was feasible to objectively measure activity behaviour between robotic arm-assisted (raTKA) and manually performed (mTKA) total knee arthroplasty using the ActivPAL accelerometer. Methods A randomized controlled trial was undertaken and a subgroup of 40 patients underwent physical activity assessment. Patients were randomized to either mTKA (n = 18) or raTKA (n = 22). Preoperative (baseline) and 12-month postoperative physical activity assessment were undertaken using the ActivPAL accelerometer in addition to patient-reported outcome measures (PROMs): Oxford Knee Score (OKS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), Forgotten Joint Score (FJS), EuroQol five-dimension questionnaire (EQ-5D), and EuroQol visual analogue scale (EQ-VAS). At 12 months, 15 patients in the raTKA group and nine in the mTKA group had paired ActivPAL data for analysis. Of the 16 patients without data, four withdrew, four were not provided with the ActivPAL due to logistical reasons, one failed to return the ActivPAL, one was allergic to the ActivPAL patch, and six failed to record or the data were corrupt. Results There were no significant differences in the improvement in standing time (mean difference (MD) 1.6, p = 0.924), step number (MD 62.0, p = 0.970), sitting time (16.3, p = 0.777), number of sit-to-stand transitions (MD 16.3, p = 0.579), or activity scores (MD 0.0, p = 0.977) between the groups. However, the raTKA had a clinically meaningful and significantly (MD 19.8, 95% CI 0.8 to 38.8; p = 0.041) greater improvement in knee-specific pain according to the WOMAC pain score. There were no other statistically significant (p ≥ 0.113) differences between the other PROMs. There were no significant (p ≥ 0.144) correlations between changes in measures of physical activity functional assessments. Conclusion Objectively assessed physical activity was logistically difficult due to patient and data loss. There were no differences in activity with small effect sizes (≤ 0.2) between the raTKA and mTKA groups, despite differences in subjective knee pain. Improvement in subjective PROMs did not correlate with objectively measured physical activity, and the two seemed to be independent of one another