Controlling a Mouse Pointer with a Single-Channel EEG Sensor

Goals: The purpose of this study was to analyze the feasibility of using the information obtained from a one-channel electro-encephalography (EEG) signal to control a mouse pointer. We used a low-cost headset, with one dry sensor placed at the FP1 position, to steer a mouse pointer and make selections through a combination of the user’s attention level with the detection of voluntary blinks. There are two types of cursor movements: spinning and linear displacement. A sequence of blinks allows for switching between these movement types, while the attention level modulates the cursor’s speed. The influence of the attention level on performance was studied. Additionally, Fitts’ model and the evolution of the emotional states of participants, among other trajectory indicators, were analyzed. (2) Methods: Twenty participants distributed into two groups (Attention and No-Attention) performed three runs, on different days, in which 40 targets had to be reached and selected. Target positions and distances from the cursor’s initial position were chosen, providing eight different indices of difficulty (IDs). A self-assessment manikin (SAM) test and a final survey provided information about the system’s usability and the emotions of participants during the experiment. (3) Results: The performance was similar to some brain–computer interface (BCI) solutions found in the literature, with an averaged information transfer rate (ITR) of 7 bits/min. Concerning the cursor navigation, some trajectory indicators showed our proposed approach to be as good as common pointing devices, such as joysticks, trackballs, and so on. Only one of the 20 participants reported difficulty in managing the cursor and, according to the tests, most of them assessed the experience positively. Movement times and hit rates were significantly better for participants belonging to the attention group. (4) Conclusions: The proposed approach is a feasible low-cost solution to manage a mouse pointe

Physical activity in cerebral palsy: a current state study

[Abstract] This document analyzes a survey conducted in three geographical areas in Spain, focusing on centers for individuals with cerebral palsy (CP). The study aims to determine the adherence rate to recommended physical activity guidelines, assess if there is a decline in interest in physical activity over time, identify the stage at which this decline occurs, and explore potential mechanisms, tools, or strategies to sustain long-term engagement in regular physical activity for this population. The 36-item questionnaire comprises multiple-choice, open-ended, and Likert scale-type questions. Data were collected on physical activity frequency and duration, daily living activities, and demographics. Statistical analysis identified patterns and relationships between variables. Findings reveal that only a 17.6% meets the World Health Organization (WHO) recommendations regarding regular physical activity (RPA), decreasing in frequency or number of days a week, (3.7 d/w to 2.9 d/w; p < 0.01) and duration (50.5 min/d to 45.2 min/d; p < 0.001) with age, especially for those with higher Gross Motor Function Classification System (GMFCS) mobility levels. Obesity slightly correlates with session duration (p = −0.207; p < 0.05), not mobility limitations. Gender has no significant impact on mobility, communication, or physical activity, while age affects variables such as body mass index (BMI) and engagement (p < 0.01). A substantial proportion follows regular physical activities based on health professionals’ advice, with interest decreasing with age. To improve adherence, focusing on sports-oriented goals, group sessions, and games is recommended. These findings emphasize the importance of personalized programs, particularly for older individuals and those with greater mobility limitations.This research was funded by: (a) project AAI, Grant PID2019-104323RB-C32, (b) project AIRPLANE, Grant PID2019-104323RB-C31, (c) project MATCH, Grant PID2019-104323RB-C33 funded by MCIN/AEI/10.13039/501100011033 Spain’s Ministry of Science and Innovation.info:eu-repo/grantAgreement/AEI/Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i/PID2019%sF104323RB%2FC32/ES/INTERACCION AFECTIVA AUMENTADAinfo_eu-repo/GrantAgreement/AEI/Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i/PID2019%2F104323RB%2FC31/ES/INTELIGENCIA ARTIFICIAL Y PLATAFORMAS ROBOTICAS MOVILES PARA LA MEJORA DE LA INDEPENDENCIA DE LAS PERSONAS CON DIVERSIDAD FUNCIONALinfo:eu-repo/grantAgreement/AEI/Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i/PID2019%2F104323RB%2FC33/ES/EVALUACION Y ASESORAMIENTO PARA LA MEJOR EFICIENCIA Y EFECTIVIDAD DE LA TECNOLOGIA DE APOY

A Study on Physical Exercise and General Mobility in People with Cerebral Palsy: Health through Costless Routines

[Abstract] Sedentary behavior (SB) is a common problem that may produce health issues in people with cerebral palsy (CP). When added to a progressive reduction in motor functions over time, SB can lead to higher percentages of body fat, muscle stiffness and associated health issues in this population. Regular physical activity (RPA) may prevent the loss of motor skills and reduce health risks. In this work, we analyzed data collected from 40 people (20 children and teenagers, and 20 adults) who attend two specialist centers in Seville to obtain an up-to-date picture regarding the practice of RPA in people with CP. Roughly 60% of the participants showed mostly mid/severe mobility difficulties, while 38% also had communicative issues. Most of the participants performed light-intensity physical activity (PA) at least once or twice a week and, in the majority of cases, had a neutral or positive attitude to exercising. In the Asociación Sevillana de Parálisis Cerebral (ASPACE) sample test, the higher the International Classification of Functioning, Disability and Health (ICF), the higher the percentage of negative responses to doing exercise. Conversely, in the Centro Específico de Educación Especial Mercedes Sanromá (CEEEMS), people likes PA but slightly higher ratios of positive responses were found at Gross Motor Function Classification System (GMFCS) levels V and II, agreeing with the higher personal engagement of people at those levels. We have also performed a literature review regarding RPA in CP and the use of low-cost equipment. As a conclusion, we found that RPA produces enormous benefits for health and motor functions, whatever its intensity and duration. Costless activities such as walking, running or playing sports; exercises requiring low-cost equipment such as elastic bands, certain smartwatches or video-games; or therapies with animals, among many others, have all demonstrated their suitability for such a purpose.This research was funded by the Spanish Ministry of Science and Innovation, State Plan 2017–2020: Challenges—R&D&I Projects with grant codes PID2019-104323RB-C32 and PID2019-104323RB-C33

Assessment and counseling to get the best efficiency and effectiveness of the assistive technology (MATCH): study protocol

Clinical Trials ID: NCT04723784[Abstract] Aims: To determine the psychosocial impact of assistive technology(AT) based on robotics and artificial intelligence in the life of people with disabilities. Background: The best match between any person with disabilities and its AT only can be gotten through a complete assessment and monitoring of his/her needs, abilities, priorities, difficulties and limitations. Without this analysis, it's possible that the device won't meet the individual's expectations. Therefore, it is important that any project focused on the development of innovating AT for people with disabilities includes the perspective of outcome measures as an important phase of the research. In this sense, the integration of the assessment, implementation process and outcome measures is crucial to guarantee the transferability for the project findings and to get the perspective from the final user. Methods: Pilot study, with prospective, longitudinal and analytical cohort. The study lasts from July 2020 until April 2023. The sample is formed by people with disabilities, ages from 2-21, that will participate from the first stage of the process (initial assessment of their abilities and needs) to the final application of outcome measures instruments (with a complete implication during the test of technology). Discussion: Only with the active participation of the person is possible to carry out a user-centered approach. This fact will allow us to define and generate technological solutions that really adjust to the expectations, needs and priorities of the people with disabilities, avoiding the AT from being abandoned, with the consequent health and social spending.Ministerio de Ciencia e Innovación (España); PID2019-104323RB-C31Ministerio de Ciencia e Innovación (España); PID2019-104323RB-C32Ministerio de Ciencia e Innovación (España); PID2019-104323RB-C33Ministerio de Ciencia e Innovación (España); PID2019-104323RB-C3

Hunt for new phenomena using large jet multiplicities and missing transverse momentum with ATLAS in 4.7 fb−1 of s√=7TeV proton-proton collisions

Results are presented of a search for new particles decaying to large numbers of jets in association with missing transverse momentum, using 4.7 fb−1 of pp collision data at s√=7TeV collected by the ATLAS experiment at the Large Hadron Collider in 2011. The event selection requires missing transverse momentum, no isolated electrons or muons, and from ≥6 to ≥9 jets. No evidence is found for physics beyond the Standard Model. The results are interpreted in the context of a MSUGRA/CMSSM supersymmetric model, where, for large universal scalar mass m 0, gluino masses smaller than 840 GeV are excluded at the 95% confidence level, extending previously published limits. Within a simplified model containing only a gluino octet and a neutralino, gluino masses smaller than 870 GeV are similarly excluded for neutralino masses below 100 GeV

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction

Hunt for new phenomena using large jet multiplicities and missing transverse momentum with ATLAS in 4.7 fb−1 of √s=7 TeV proton-proton collisions

Results are presented of a search for new particles decaying to large numbers of jets in association with missing transverse momentum, using 4.7 fb−1 of pp collision data at s√=7TeV collected by the ATLAS experiment at the Large Hadron Collider in 2011. The event selection requires missing transverse momentum, no isolated electrons or muons, and from ≥6 to ≥9 jets. No evidence is found for physics beyond the Standard Model. The results are interpreted in the context of a MSUGRA/CMSSM supersymmetric model, where, for large universal scalar mass m 0, gluino masses smaller than 840 GeV are excluded at the 95% confidence level, extending previously published limits. Within a simplified model containing only a gluino octet and a neutralino, gluino masses smaller than 870 GeV are similarly excluded for neutralino masses below 100 GeV

Search for lepton flavour violation in the eμ continuum with the ATLAS detector in s√=7 TeV pp collisions at the LHC

This paper presents a search for the t-channel exchange of an R-parity violating scalar top quark ( t~ ) in the e ± μ ∓ continuum using 2.1 fb−1 of data collected by the ATLAS detector in s√=7 TeV pp collisions at the Large Hadron Collider. Data are found to be consistent with the expectation from the Standard Model backgrounds. Limits on R-parity-violating couplings at 95 % C.L. are calculated as a function of the scalar top mass ( mt~ ). The upper limits on the production cross section for pp→eμX, through the t-channel exchange of a scalar top quark, ranges from 170 fb for mt~=95 GeV to 30 fb for mt~=1000 GeV