81 research outputs found
50-W average power Ho:YAG SESAM-modelocked thin-disk oscillator at 2.1 um
Ultrafast laser systems operating with high-average power in the wavelength
range from 1.9 um to 3 um are of interest for a wide range of applications for
example in spectroscopy, material processing and as drivers for secondary
sources in the XUV spectral region. In this area, laser systems based on
holmium-doped gain materials directly emitting at 2.1 um have made significant
progress over the past years, however so far only very few results were
demonstrated in power-scalable high-power laser geometries. In particular, the
thin-disk geometry is promising for directly modelocked oscillators with high
average power levels that are comparable to amplifier systems at MHz repetition
rate. In this paper, we demonstrate Semiconductor Saturable Absorber Mirror
(SESAM) modelocked Ho:YAG thin-disk lasers (TDLs) emitting at 2.1 um wavelength
with record-holding performance levels. In our highest average power
configuration, we reach 50 W of average power, with 1.13 ps pulses, 2.11 uJ of
pulse energy and ~1.9 MW of peak power. To the best of our knowledge, this
represents the highest average power, as well as the highest output pulse
energy so far demonstrated from a modelocked laser in the 2 um wavelength
region. This record performance level was enabled by the recent development of
high-power GaSb-based SESAMs with low loss, adapted for high intracavity power
and pulse energy. We also explore the limitations in terms of reaching shorter
pulse durations at high power with this gain material in the disk geometry and
using SESAM modelocking, and present first steps in this direction, with the
demonstration of 30 W of output power, with 692 fs pulses in another laser
configuration.Comment: 12 pages, 10 figure
Experimentally verified pulse formation model for high-power femtosecond VECSELs
Optically pumped vertical-external-cavity surface-emitting lasers (OP-VECSELs), passively modelocked with a semiconductor saturable absorber mirror (SESAM), have generated the highest average output power from any sub-picosecond semiconductor laser. Many applications, including frequency comb synthesis and coherent supercontinuum generation, require pulses in the sub-300-fs regime. A quantitative understanding of the pulse formation mechanism is required in order to reach this regime while maintaining stable, high-average-power performance. We present a numerical model with which we have obtained excellent quantitative agreement with two recent experiments in the femtosecond regime, and we have been able to correctly predict both the observed pulse duration and the output power for the first time. Our numerical model not only confirms the soliton-like pulse formation in the femtosecond regime, but also allows us to develop several clear guidelines to scale the performance toward shorter pulses and higher average output power. In particular, we show that a key VECSEL design parameter is a high gain saturation fluence. By optimizing this parameter, 200-fs pulses with an average output power of more than 1 W should be possible
Experimentally verified pulse formation model for high-power femtosecond VECSELs
Optically pumped vertical-external-cavity surface-emitting lasers (OP-VECSELs), passively modelocked with a semiconductor saturable absorber mirror (SESAM), have generated the highest average output power from any sub-picosecond semiconductor laser. Many applications, including frequency comb synthesis and coherent supercontinuum generation, require pulses in the sub-300-fs regime. A quantitative understanding of the pulse formation mechanism is required in order to reach this regime while maintaining stable, high-average-power performance. We present a numerical model with which we have obtained excellent quantitative agreement with two recent experiments in the femtosecond regime, and we have been able to correctly predict both the observed pulse duration and the output power for the first time. Our numerical model not only confirms the soliton-like pulse formation in the femtosecond regime, but also allows us to develop several clear guidelines to scale the performance toward shorter pulses and higher average output power. In particular, we show that a key VECSEL design parameter is a high gain saturation fluence. By optimizing this parameter, 200-fs pulses with an average output power of more than 1W should be possibl
Picosecond ultrasonics with a free-running dual-comb laser
We present a free-running 80-MHz dual-comb polarization-multiplexed solid-state
laser which delivers 1.8 W of average power with 110-fs pulse duration per comb. With a high-sensitivity pump-probe setup, we apply this free-running dual-comb laser to picosecond ultrasonic measurements. The ultrasonic signatures in a semiconductor multi-quantum-well structure originating from the quantum wells and superlattice regions are revealed and discussed. We further demonstrate ultrasonic measurements on a thin-film metalized sample and compare these measurements to ones obtained with a pair of locked femtosecond lasers. Our data show that a free-running dual-comb laser is well-suited for picosecond ultrasonic measurements and thus it offers a significant reduction in complexity and cost for this widely adopted non-destructive testing techniqu
First investigation of the noise and modulation properties of the carrier-envelope offset in a modelocked semiconductor laser
Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector
A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements
- …