1,835 research outputs found
Composites Based on Poly(Lactic Acid) (PLA) and SBA-15: Effect of Mesoporous Silica on Thermal Stability and on Isothermal Crystallization from Either Glass or Molten State
© 2020 by the authors.Several composites based on an L-rich poly(lactic acid) (PLA) with different contents of mesoporous Santa Barbara Amorphous (SBA-15) silica were prepared in order to evaluate the effect of the mesoporous silica on the resultant PLA materials by examining morphological aspects, changes in PLA phases and their transitions, and, primarily, the influence on some final properties. Melt extrusion was chosen for the obtainment of the composites, followed by quenching from the melt to prepare films. Completely amorphous samples were then attained, as deduced from X-ray diffraction and differential scanning calorimetry (DSC) analyses. Thermogravimetric analysis (TGA) results demonstrated that the presence of SBA-15 particles in the PLA matrix did not exert any significant influence on the thermal decomposition of these composites. An important nucleation effect of the silica was found in PLA, especially under isothermal crystallization either from the melt or from its glassy state. As expected, isothermal crystallization from the glass was considerably faster than from the molten state, and these high differences were also responsible for a more considerable nucleating role of SBA-15 when crystallizing from the melt. It is remarkable that the PLA under analysis showed very close temperatures for cold crystallization and its subsequent melting. Moreover, the type of developed polymorphs did not accomplish the common rules previously described in the literature. Thus, all the isothermal experiments led to exclusive formation of the α modification, and the observation of the αâ crystals required the annealing for long times at temperatures below 80 °C, as ascertained by both DSC and X-ray diffraction experiments. Finally, microhardness (MH) measurements indicated a competition between the PLA physical aging and the silica reinforcement effect in the as-processed amorphous films. Physical aging in the neat PLA was much more important than in the PLA matrix that constituted the composites. Accordingly, the MH trend with SBA-15 content was strongly dependent on aging times.This research was funded by AEI/FEDER, UE (grant number MAT2016-79869-C2-1-P) and ALBA
Synchrotron Light Facility. TMDR is also grateful for her pre-doctoral funding (contract number BES-2017-082284).Peer reviewe
New HDPE/MCM41 nanocomposites with improved mechanical performance: synthesis and characterizatio
Ordered mesoporous silicas with a channel structure of well-defined geometries and
dimensions at nanometer scale are excellent candidates to host intercalation reactions.
In recent years, our research group has shown that mesoporous silicas of the M41S class
combined with metallocene complexes give rise to excellent supported catalysts for ethylene
polymerisation. Due to the support characteristics, the reaction is allowed to occur in the
channels and in this way hybrid organic-inorganic materials can be prepared within a large
range of nanofiller concentration. These HDPE/MCM-41 nanocomposites exhibit an
improved mechanical performance and an easier degradability due to the additional role of
MCM-41 as a promoter for PE degradation
MCM-41 as Nanofiller in Polyethylene Hybrid Materials
Mesoporous MCM-41 exhibits a stable framework structure, well-defined nanopores and a large surface area. When combined with metallocene polymerisation catalyst, these mesoporous materials, provide a unique route
for preparing polyolefin-based nanocomposites by in situ polymerisation
Fiber Burden and asbestos-Related Diseases: an Umbrella Review
OBJECTIVE: What are the levels of asbestos exposure that cause each type of health effect? The objective of this study was to review the available scientific evidence on exposure levels for asbestos and their relationship to health effects.
METHOD: An umbrella review of English-language reviews and meta-analyses, from 1980 to March 2021 was conducted. We included reviews involving quantified asbestos exposures and health outcomes. The review has been adapted to the indications of the PRISMA declaration. Methodological quality of the selected studies was assessed using the AMSTAR instrument.
RESULTS: We retrieved 196 references. After applying the search strategy and quality analysis, 10 reviews were selected for in-depth analysis. For lung cancer, the highest risk was observed with exposure to amphiboles. Longer, thinner fibers had the greatest capacity to cause lung cancer, especially those \u3e 10 ÎŒm in length. For mesothelioma, longer and thinner fibers were also more pathogenic; amphiboles â„ 5 ÎŒm are especially associated with increased mesothelioma risk. No studies observed an increased risk for lung cancer or mesothelioma at asbestos exposure levels
CONCLUSIONS: Banning all asbestos exposure remains the best measure to preventing its negative health effects. The highest quality reviews and meta-analyses support that there is little risk of lung cancer or mesothelioma at daily exposure levels below 0.1 f/ml
Variation of ultimate properties in extruded iPP-mesoporous silica nanocomposites by effect of iPP confinement within the mesostructures
Nanocomposites based on isotactic polypropylene (iPP) and mesoporous silica particles of either MCM-41 or SBA-15 were prepared by melt extrusion. The effect of the silica incorporated into an iPP matrix was firstly detected in the degradation behavior and in the rheological response of the resultant composites. Both were ascribed, in principle, to variations in the inclusion of iPP chains within these two mesostructures, with well different pore size. DSC experiments did not provide information on the existence of confinement in the iPP-MCM-41 materials, whereas a small endotherm, located at about 100 °C and attributed to the melting of confined crystallites, is clearly observed in the iPP-SBA-15 composites. Real-time variable-temperature Small Angle X-ray Scattering (SAXS) experiments with synchrotron radiation turned out to be crucial to finding the presence of iPP within MCM-41 pores. From these measurements, precise information was also deduced on the influence of the MCM-41 on iPP long spacing since overlapping does not occur between most probable iPP long spacing peak with the characteristic diffractions from the MCM-41 hexagonal nanostructure in comparison with existing superposition in SBA-15-based materials.Fil: Barranco GarcĂa, Rosa. Instituto en Ciencia y TecnologĂa de PolĂmeros; EspañaFil: GĂłmez Elvira, JosĂ© M.. Instituto en Ciencia y TecnologĂa de PolĂmeros; EspañaFil: Ressia, Jorge AnĂbal. Provincia de Buenos Aires. GobernaciĂłn. ComisiĂłn de Investigaciones CientĂficas; Argentina. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - BahĂa Blanca. Planta Piloto de IngenierĂa QuĂmica. Universidad Nacional del Sur. Planta Piloto de IngenierĂa QuĂmica; ArgentinaFil: Quinzani, Lidia Maria. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - BahĂa Blanca. Planta Piloto de IngenierĂa QuĂmica. Universidad Nacional del Sur. Planta Piloto de IngenierĂa QuĂmica; ArgentinaFil: Valles, Enrique Marcelo. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - BahĂa Blanca. Planta Piloto de IngenierĂa QuĂmica. Universidad Nacional del Sur. Planta Piloto de IngenierĂa QuĂmica; ArgentinaFil: PĂ©rez, Ernesto. Instituto en Ciencia y TecnologĂa de PolĂmeros; EspañaFil: Cerrada, MarĂa L.. Instituto en Ciencia y TecnologĂa de PolĂmeros; Españ
Chemical modification of block copolymers based on 2-hydroxyethyl acrylate to obtain amphiphilic glycopolymers
Fast scanning calorimetry study of the structural relaxation in a random propylene-co-1-octene copolymer
Clonal chromosomal mosaicism and loss of chromosome Y in elderly men increase vulnerability for SARS-CoV-2
The pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2, COVID-19) had an estimated overall case fatality ratio of 1.38% (pre-vaccination), being 53% higher in males and increasing exponentially with age. Among 9578 individuals diagnosed with COVID-19 in the SCOURGE study, we found 133 cases (1.42%) with detectable clonal mosaicism for chromosome alterations (mCA) and 226 males (5.08%) with acquired loss of chromosome Y (LOY). Individuals with clonal mosaic events (mCA and/or LOY) showed a 54% increase in the risk of COVID-19 lethality. LOY is associated with transcriptomic biomarkers of immune dysfunction, pro-coagulation activity and cardiovascular risk. Interferon-induced genes involved in the initial immune response to SARS-CoV-2 are also down-regulated in LOY. Thus, mCA and LOY underlie at least part of the sex-biased severity and mortality of COVID-19 in aging patients. Given its potential therapeutic and prognostic relevance, evaluation of clonal mosaicism should be implemented as biomarker of COVID-19 severity in elderly people. Among 9578 individuals diagnosed with COVID-19 in the SCOURGE study, individuals with clonal mosaic events (clonal mosaicism for chromosome alterations and/or loss of chromosome Y) showed an increased risk of COVID-19 lethality
Differential cross section measurements for the production of a W boson in association with jets in protonâproton collisions at âs = 7 TeV
Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript â1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio
- âŠ