Acupuncture : could it become everyday practice in oncology?

Acupuncture is a complementary and alternative medical treatment (CAM) which is increasingly used in the care of cancer patients. Traditionally derived from Chinese medicine, nowadays it is becoming a part of evidence-based oncology. The use of acupuncture in these patients has been recommended by the American Cancer Society (ACS) for the treatment of side effects associated with conventional cancer therapy and cancer-related ailments. A growing body of evidence supports the use of acupuncture in the treatment of cancer- induced pain and chemotherapy- related nausea and vomiting. Also other indications, such as xerostomia, fatigue, hot flashes, anxiety and peripheral neuropathy, are being constantly evaluated. This article summarizes the most important discoveries related to the possible usefulness of this method in contemporary oncology. Emphasis is placed on the results of randomized controlled trials with an adequate level of evidence. However, explanation of the mechanisms responsible for these effects requires confirmation in further studies with an adequate level of evidence. In future, acupuncture may become an interesting and valuable addition to conventional medicine

Separation of 44Sc from Natural Calcium Carbonate Targets for Synthesis of 44Sc-DOTATATE

The rapid increase in applications of scandium isotopes in nuclear medicine requires new efficient production routes for these radioisotopes. Recently, irradiations of calcium in cyclotrons by , deuteron, and proton beams have been used. Therefore, effective post-irradiation separation and preconcentration of the radioactive scandium from the calcium matrix are important to obtain the pure final product in a relatively small volume. Nobias resin was used as a sorbent for effective separation of 44Sc from calcium targets. Separation was performed at pH 3 using a column containing 10 mg of resin. Scandium was eluted with 100 L of 2 mol L1 HCl. Particular attention was paid to the reduction of calcium concentration, presence of metallic impurities, robustness and simple automation. 44Sc was separated with 94.9 2.8% yield, with results in the range of 91.7–99.0%. Purity of the eluate was confirmed with ICP-OES determination of metallic impurities and >99% chelation efficiency with DOTATATE, followed by >36 h radiochemical stability of the complex. A wide range of optimal conditions and robustness to target variability and suspended matter facilitates the proposed method in automatic systems for scandium isotope separation and synthesis of scandium-labeled radiopharmaceuticals

Imaging of hypoxia in small animals with ^{18}F fluoromisonidasole

A method of automated synthesis of [18F]fluoromisonidazole ([18F]FMISO) for application in preclinical studies on small animals was presented. A remote-controlled synthesizer Synthra RNplus was used for nucleophilic substitution of NITTP (1-(2'-nitro-1'-imidazolyl)-2-O-tetrahydropyranyl-3-O-toluenesulfonyl-propanediol) with 18F anion. Labeling of 5 mg of precursor was performed in anhydrous acetonitrile at 100°C for 10 min, and the hydrolysis with HCl was performed at 100°C for 5 min. Final purifi cation was done with high-performance liquid chromatography (HPLC) and the radiochemical purity of radiotracer was higher than 99%. Proposed [18F]FMISO synthesis was used as a reliable tool in studies on hypoxia in Lewis lung carcinoma (LLC) in mouse models

New developments on the WHIZARD event generator

We give a status report on new developments in the WHIZARD event generator, including NLO electroweak automation for $e^+e^-$ colliders, loop-induced processes, POWHEG matching, new features in the UFO interface and the current development for matching between exclusive photon radiation and fixed-order LO/NLO electroweak (EW) corrections. We report on several bug fixes relevant for certain aspects of the ILC250 Monte Carlo (MC) mass production, especially on the normalization of matching EPA samples with full-matrix element samples. Finally, we mention some ongoing work on efficiency improvements regarding parallelization of matrix elements and phase space sampling, as well as plans to revive the top threshold simulation.Comment: Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.

Acupuncture: could it become everyday practice in oncology?

Acupuncture is a complementary and alternative medical treatment (CAM) which is increasingly used in the care of cancer patients. Traditionally derived from Chinese medicine, nowadays it is becoming a part of evidence-based oncology. The use of acupuncture in these patients has been recommended by the American Cancer Society (ACS) for the treatment of side effects associated with conventional cancer therapy and cancer-related ailments. A growing body of evidence supports the use of acupuncture in the treatment of cancer-induced pain and chemotherapy-related nausea and vomiting. Also other indications, such as xerostomia, fatigue, hot flashes, anxiety and peripheral neuropathy, are being constantly evaluated. This article summarizes the most important discoveries related to the possible usefulness of this method in contemporary oncology. Emphasis is placed on the results of randomized controlled trials with an adequate level of evidence. However, explanation of the mechanisms responsible for these effects requires confirmation in further studies with an adequate level of evidence. In future, acupuncture may become an interesting and valuable addition to conventional medicine

Synthesis, quality control and determination of metallic impurities in F-fludeoxyglucose production process

AimThe aim of this study was to synthesize 18FDG in some consecutive runs and check the quality of manufactured radiopharmaceuticals and to determine the distribution of metallic impurities in the synthesis process.BackgroundFor radiopharmaceuticals the general requirements are listed in European Pharmacopeia and these parameters have to be checked before application for human use.Materials and methodsStandard methods for the determination of basic characteristics of radiopharmaceuticals were used. Additionally, high resolution γ spectrometry was used for the assessment of nuclidic purity and inductively coupled plasma with mass spectrometry to evaluate metallic content.ResultsResults showed sources and distribution of metallic and radiometallic impurities in the production process. Main part is trapped in the initial separation column of the synthesis unit and is not distributed to the final product in significant amounts.ConclusionsProduced 18FDG filled requirements of Ph.Eur. and the content of radionuclidic and metallic impurities was in the acceptable range

Combined LHC/ILC analysis of a SUSY scenario with heavy sfermions

We discuss the potential of combined analyses at the Large Hadron Collider and the planned International Linear Collider to explore low-energy supersymmetry in a difficult region of the parameter space characterized by masses of the scalar SUSY particles around 2 TeV. Precision analyses of cross sections for light chargino production and forward--backward asymmetries of decay leptons and hadrons at the ILC, together with mass information on chi^0_2 and squarks from the LHC, allow us to determine the underlying fundamental gaugino/higgsino MSSM parameters and to constrain the masses of the heavy, kinematically inaccessible sparticles. No assumptions on a specific SUSY-breaking mechanism are imposed. For this analysis the complete spin correlations between production and decay processes are taken into account.Comment: new figure added, updated to match the published versio

A Highly Emissive Surface Layer in Mixed-Halide Multication Perovskites.

Mixed-halide lead perovskites have attracted significant attention in the field of photovoltaics and other optoelectronic applications due to their promising bandgap tunability and device performance. Here, the changes in photoluminescence and photoconductance of solution-processed triple-cation mixed-halide (Cs0.06 MA0.15 FA0.79 )Pb(Br0.4 I0.6 )3 perovskite films (MA: methylammonium, FA: formamidinium) are studied under solar-equivalent illumination. It is found that the illumination leads to localized surface sites of iodide-rich perovskite intermixed with passivating PbI2 material. Time- and spectrally resolved photoluminescence measurements reveal that photoexcited charges efficiently transfer to the passivated iodide-rich perovskite surface layer, leading to high local carrier densities on these sites. The carriers on this surface layer therefore recombine with a high radiative efficiency, with the photoluminescence quantum efficiency of the film under solar excitation densities increasing from 3% to over 45%. At higher excitation densities, nonradiative Auger recombination starts to dominate due to the extremely high concentration of charges on the surface layer. This work reveals new insight into phase segregation of mixed-halide mixed-cation perovskites, as well as routes to highly luminescent films by controlling charge density and transfer in novel device structures

Państwo, gospodarka, społeczeństwo w integrującej się Europie TOM 1

Ze wstępu: "III Międzynarodowa Konferencja Naukowa, jaką w pierwszych dniach czerwca 2003 roku zorganizowała Krakowska Szkoła Wyższa, poświęcona była uczczeniu wyjątkowego jubileuszu 500-lecia urodzin jej patrona - Andrzeja Frycza Modrzewskiego. Jednak to nie myśl polityczna tego wielkiego Polaka i reformatora stała się wiodącym tematem konferencji. W centrum zainteresowań znalazły się zagadnienia 0 wiele bardziej aktualne, dotyczące bowiem integracji europejskiej. Problematyka tym bardziej żywotna, gdyż dotykająca bieżącego życia politycznego - zwłaszcza w kontekście referendum akcesyjnego, które odbyło się w równy tydzień po konferencji. Tak więc jej uczestnicy mieli doskonałą okazję do podjęcia interesujących rozważań związanych z perspektywą rozwoju państwa, gospodarki i społeczeństwa w warunkach integracji europejskiej."(...

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements