Blue-emission tuning of perovskite light-emitting diodes with a simple TPBi surface treatment

We demonstrate a simple approach for blue-emission tuning of quasi-2D perovskite light-emitting diodes through a surface treatment of 2,2′,2″-(1,3,5-benzinetriyl)tris(1-phenyl-1H-benzimidazole) (TPBi). By increasing the TPBi concentration, we achieved tunable electroluminescence of the perovskite layer with wavelength shifted from the blue-green (506 nm) to blue (481 nm) regions of the visible spectrum. Fourier-transform infrared spectroscopy, scanning electron microscopy, and UV–Vis absorption spectroscopy were conducted to study the morphological and optoelectronic properties of the films. Our results suggest that the TPBi molecules accumulated on the surface and grain boundaries of the perovskite layer changed the perovskite electronic structure causing the observed blue shifts

Improved performance of perovskite light-emitting diodes with a NaCl doped PEDOT:PSS hole transport layer

We demonstrate a simple and effective way to enhance the performance of perovskite light-emitting diodes (PeLEDs) by utilizing an alkali halide doped PEDOT:PSS as the hole transport layer (HTL). The alkali halide (NaCl) doping helped the growth of the quasi-2D perovskite phases on top of the PEDOT:PSS, it also significantly reduced the exciton quenching in PEDOT:PSS based PeLEDs. More importantly, the doping reduced the work function of the PEDOT:PSS surface, which appropriately modulated the hole injection leading to improved charge balance. This helps to control the recombination zone inside the thin perovskite emitting layer (∼10 nm). The optimized blue-green PeLEDs with the NaCl doped PEDOT:PSS HTL showed a maximum luminance of 1487 cd m$^{-2}$, current efficiency of 2.16 cd A$^{-1}$ with a low turn-on voltage of 3.0 V, which are 217% and 567% higher than the PeLEDs with the pristine PEDOT:PSS layer (turn-on voltage: 3.3 V), respectively

A Single‐Step Hot Embossing Process for Integration of Microlens Arrays in Biodegradable Substrates for Improved Light Extraction of Light‐Emitting Devices

Integration of light management solutions relying on biodegradable materials in organic light‐emitting devices could assist the development of sustainable light sources or conformable and wearable display technology. Using industrially relevant processing techniques, it is shown that microlens arrays can be seamlessly integrated into flexible and biodegradable cellulose diacetate substrates to facilitate extraction of the trapped substrate modes in light‐emitting electrochemical cells. The substrates are patterned for light extraction and optimized for scalable printing processes in a single step by thermally embossing microlenses with polydimethylsiloxane molds on one substrate surface and simultaneous flattening of the other. Furthermore, by implementing the biopolymer substrate with microlens arrays, the total volume fraction of biodegradable materials in the microlense equipped device is 99.94%. The embossed microstructures on the biopolymer substrates are investigated by means of scanning electron microscopy and the angular light extraction profile of the devices is measured and compared to ray tracing simulations. Light‐emitting electrochemical cells with integrated microlens array substrates achieve an efficiency enhancement factor of 1.45, exceeding conventional organic light‐emitting diodes on glass substrates with laminated microlens arrays (enhancement factor of 1.23)

Functionalized tetrapodal diazatriptycenes for electrostatic dipole engineering in n-type organic thin film transistors

V.R., F.S.B., S.H., M.M., M.-M.B., S.H., J.F., W.K., W.J., A.K., A.P., U.H.F.B., and K.M. acknowledge the German Federal Ministry of Education and Research (BMBF) for financial support within the INTERPHASE project (nos. 13N13656, 13N13657, 13N13658, 13N13659). V.R. thanks the German Research Foundation for financial support within the SFB1249 project and the Heidelberg Graduate School of Fundamental research.The authors also appreciate financial support by the German Research Foundation (grant ZH 63/39-1) and by the DAAD-ACEH Scholarship of Excellence (A.A.).A diazatriptycene‐based tetrapodal scaffold with thiol anchors enforces a nearly upright orientation of functional groups, introduced to its quinoxaline subunit, with respect to the substrate upon formation of self‐assembled monolayers (SAMs). Substitution with electron‐withdrawing fluorine and cyano as well as electron‐rich dimethylamino substituents allows tuning of the molecular dipole and, consequently, of the work function of gold over a range of 1.0 eV (from 3.9 to 4.9 eV). The properties of the SAMs are comprehensively investigated by infrared reflection absorption spectroscopy, near edge X‐ray absorption fine structure spectroscopy, and X‐ray photoelectron spectroscopy. As prototypical examples for the high potential of the presented SAMs in devices, organic thin‐film transistors are fabricated.Publisher PDFPeer reviewe

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements