Class Attendance and Students’ Evaluations of Teaching: Do No-Shows Bias Course Ratings and Rankings?

Background: Many university departments use students’ evaluations of teaching (SET) to compare and rank courses. However, absenteeism from class is often nonrandom and, therefore, SET for different courses might not be comparable. Objective: The present study aims to answer two questions. Are SET positively biased due to absenteeism? Do procedures, which adjust for absenteeism, change course rankings? Research Design: The author discusses the problem from a missing data perspective and present empirical results from regression models to determine which factors are simultaneously associated with students’ class attendance and course ratings. In order to determine the extent of these biases, the author then corrects average ratings for students’ absenteeism and inspect changes in course rankings resulting from this adjustment. Subjects: The author analyzes SET data on the individual level. One or more course ratings are available for each student. Measures: Individual course ratings and absenteeism served as the key outcomes. Results: Absenteeism decreases with rising teaching quality. Furthermore, both factors are systematically related to student and course attributes. Weighting students’ ratings by actual absenteeism leads to mostly small changes in ranks, which follow a power law. Only a few, average courses are disproportionally influenced by the adjustment. Weighting by predicted absenteeism leads to very small changes in ranks. Again, average courses are more strongly affected than courses of very high or low in quality. Conclusions: No-shows bias course ratings and rankings. SET are more appropriate to identify high- and low-quality courses than to determine the exact ranks of average courses

Water repellency decreases with increasing carbonate content and pH for different biocrust types on sand dunes

Biocrusts are biological communities that occupy the soil surface, accumulate organic matter and mineral particles and hence strongly affect the properties of the soils they cover. Moreover, by affecting water repellency, biocrusts may cause a preferential infiltration of rainwater, with a high impact on the formation of local water pathways, especially for sand dunes. The aim of this study is to shed light on the connections between water repellency and pH, carbonate and organic matter content in two dune ecosystems with different biocrust types. For this, we used contact angle measurements, gas volumetric carbonate determination and organic matter characterization via FT-IR and TOF-SIMS. In both ecosystems, moss-dominated biocrusts showed higher water repellency and higher amounts of organic matter compared to algal or cyanobacterial biocrusts. Surprisingly, the biocrusts of the two dune systems did not show differences in organic matter composition or organic coatings of the mineral grains. Biocrusts on the more acidic dunes showed a significantly higher level of water repellency as compared to higher carbonate containing dunes. We conclude that the driving factor for the increase in water repellency between cyanobacterial and moss-dominated biocrusts within one study site is the content of organic matter. However, when comparing the different study sites, we found that higher amounts of carbonate reduced biocrust water repellency

Schreibersite: an effective catalyst in the formose reaction network

We report on the ability of the meteoritic material schreibersite to catalyze the generation of higher sugars from simple carbohydrates in the formose reaction network. Since the analysis of carbonaceous meteorites like the Murchison meteorite it has become generally accepted that a substantial amount of organic material has been delivered to the early earth and, therefore, ought to be considered in scenarios for the origin (s) of life. Also for the open question of accessible phosphorus sources, an extraterrestrial material called schreibersite has been identified that is capable of releasing soluble and reactive phosphorus oxyanions that would react with organics to form for instance nucleotides and membrane associated molecules. We have reinvestigated this material using capillary electrophoresis to monitor its corrosion process in water and probed its ability to phosphorylate a wide range of organics. Although showing a poor reactivity of schreibersite, we have found that the material catalyzes the aldol reaction of small carbohydrates forming larger sugar molecules. This reaction in the formose reaction network is a prebiotically likely route to biologically relevant sugars. The results of our study present one of the first instances of connecting extraterrestrial material to prebiotic chemistry on the early earth

The Hardware of the ATLAS Pixel Detector Control System

The innermost part of the ATLAS (A Toroidal LHC ApparatuS) experiment will be a pixel detector, built of 1744 individual detector modules. To operate the modules, readout electronics, and other detector components, a complex power supply and control system is necessary. The specific powering and control requirements are described, along with the custom made components of our power supply and control systems. These include remotely programmable Regulator Stations, the power supply system for the optical transceivers, several monitoring units and the Interlock System

Monitoring tools for DevOps and microservices: A systematic grey literature review

Microservice-based systems are usually developed according to agile practices like DevOps, which enables rapid and frequent releases to promptly react and adapt to changes. Monitoring is a key enabler for these systems, as they allow to continuously get feedback from the field and support timely and tailored decisions for a quality-driven evolution. In the realm of monitoring tools available for microservices in the DevOps-driven development practice, each with different features, assumptions, and performance, selecting a suitable tool is an as much difficult as impactful task. This article presents the results of a systematic study of the grey literature we performed to identify, classify and analyze the available monitoring tools for DevOps and microservices. We selected and examined a list of 71 monitoring tools, drawing a map of their characteristics, limitations, assumptions, and open challenges, meant to be useful to both researchers and practitioners working in this area. Results are publicly available and replicable

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Skeletal Light-Scattering Accelerates Bleaching Response in Reef-Building Corals

Background At the forefront of ecosystems adversely affected by climate change, coral reefs are sensitive to anomalously high temperatures which disassociate (bleaching) photosynthetic symbionts (Symbiodinium) from coral hosts and cause increasingly frequent and severe mass mortality events. Susceptibility to bleaching and mortality is variable among corals, and is determined by unknown proportions of environmental history and the synergy of Symbiodinium- and coral-specific properties. Symbiodinium live within host tissues overlaying the coral skeleton, which increases light availability through multiple light-scattering, forming one of the most efficient biological collectors of solar radiation. Light-transport in the upper ~200 μm layer of corals skeletons (measured as ‘microscopic’ reduced-scattering coefficient, μ′S,m), has been identified as a determinant of excess light increase during bleaching and is therefore a potential determinant of the differential rate and severity of bleaching response among coral species. Results Here we experimentally demonstrate (in ten coral species) that, under thermal stress alone or combined thermal and light stress, low-μ′S,m corals bleach at higher rate and severity than high-μ′S,m corals and the Symbiodinium associated with low-μ′S,m corals experience twice the decrease in photochemical efficiency. We further modelled the light absorbed by Symbiodinium due to skeletal-scattering and show that the estimated skeleton-dependent light absorbed by Symbiodinium (per unit of photosynthetic pigment) and the temporal rate of increase in absorbed light during bleaching are several fold higher in low-μ′S,m corals. Conclusions While symbionts associated with low-μ′S,m corals receive less total light from the skeleton, they experience a higher rate of light increase once bleaching is initiated and absorbing bodies are lost; further precipitating the bleaching response. Because microscopic skeletal light-scattering is a robust predictor of light-dependent bleaching among the corals assessed here, this work establishes μ′S,m as one of the key determinants of differential bleaching response

Search for anomalous production of prompt like-sign lepton pairs at s√=7TeV with the ATLAS detector

An inclusive search for anomalous production of two prompt, isolated leptons with the same electric charge is presented. The search is performed in a data sample corresponding to 4.7 fb(-1) of integrated luminosity collected in 2011 at root s = 7TeV with the ATLAS detector at the LHC. Pairs of leptons (e(+/-)e(+/-), e(+/-)mu(+/-), and mu(+/-)mu(+/-)) with large transverse momentum are selected, and the dilepton invariant mass distribution is examined for any deviation from the Standard Model expectation. No excess is found, and upper limits on the production cross section of like-sign lepton pairs from physics processes beyond the Standard Model are placed as a function of the dilepton invariant mass within a fiducial region close to the experimental selection criteria. The 95% confidence level upper limits on the cross section of anomalous e(+/-)e(+/-), e(+/-)mu(+/-), or mu(+/-)mu(+/-) production range between 1.7 fb and 64 fb depending on the dilepton mass and flavour combination