31 research outputs found
Paintable Encapsulated Body-Temperature-Responsive Photonic Reflectors with Arbitrary Shapes
A temperature-responsive photonic coating on a flexible substrate was prepared by a photoinduced phase-separation process. In this coating a low molecular weight cholesteric liquid crystal (Ch-LC) mixture was encapsulated between the substrate and an in situ formed protective polymer top layer. The photonic coating showed a blue-shift of the photonic reflection band of 100 nm by heating from 22 to 23 °C due to the close proximity to the smectic to cholesteric phase transition and an overall 330 nm blue-shift while heating from 22 to 45 °C. Hence, the red coating turned green upon contact with skin within seconds. Furthermore, the coating structure and composition were investigated in detail, revealing a thick top coat. The adhesion of the coating was improved by providing trays on the substrate (by etching or 3D printing), resulting in a link between arbitrary-shaped substrates and the protective polymer top layer. These bendable coatings could be of interest for sensors, anticounterfeit labels, or customizable aesthetic applications.</p
Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector
A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements
Investigating orphan cytochromes P450 from Mycobacterium tuberculosis : the search for potential drug targets
Tuberculosis (TB) is a disease that the World Health Organisation (WHO) regards as a global pandemic. There is a great need for new drugs to combat this threat. Drug resistant strains of the causative agent, Mycobacterium tuberculosis (Mtb), have increased the urgency of this quest for novel anti-mycobacterial medicines. Publication of the Mtb genome sequence revealed a large number of cytochrome P450 (CYP) enzymes [Cole, S. T. et al. 1998]. These mono-oxygenase enzymes have been studied for many years and are responsible for metabolic functions in every kingdom of life. Research on the Mtb P450s to date has highlighted several of them as having critcal roles within the organism. CYP121 and CYP128 have been implicated as essential through gene knockout studies. It has been demonstrated that CYP125 is not essential for viability. However, it is part of a gene cluster highly important for Mtb infectivity and virulence. Due to the prospective importance of P450s to Mtb, this group of enzymes is under investigation as a source of novel drug targets. CYP142 was discovered as a potential drug target after it was located to a gene cluster involved in cholesterol catabolism during Mtb dormancy. As part of this PhD project, it was demonstrated that CYP142 performs an almost identical role to that reported for CYP125. These enzymes both perform C27 hydroxylation and carboxylation of the cholesterol side chain. However, variations in the level of oxidation have been identified, dependent upon the redox system with which these P450s are associated. A crystal structure of CYP142 showing high similarity in active site architecture to CYP125 supports the physiological role of CYP142 in cholesterol catabolism. Combining this with in vitro data which demonstrates that CYP142 possesses high affinity for a range of azole anti-fungal agents [Ahmad, Z. et al. 2005, 2006] supports the suggestion that it is a candidate target for the next generation of anti-mycobacterial drugs. CYP144 was highlighted as being important during the latent phase of Mtb growth, a phase that is not targeted by any of the current antimycobacterials. Work performed as part of this PhD has shown that many characteristics of CYP144 are highly comparable to those reported for other MtbP450s. CYP144 shows high affinity and specificity towards many azole molecules. Econazole, clotrimazole and miconazole have repeatedly been shown to bind to MtbP450s, including CYP144 and CYP142, with high affinity and are excellent potential candidates as novel anti-mycobacterial agents. An N-terminally truncated form of CYP144, CYP144-T, has been investigated in the pursuit of a CYP144 crystal structure. It is hoped that this will enable the elucidation of a physiological role for CYP144. Both CYP142 and CYP144 have demonstrated biochemical and biophysical characteristics that contribute to our knowledge of P450 enzymes. This PhD has established that CYP142 exhibits an equilibrium between P450 and P420 species in its CO-bound, ferrous form. A conversion from P420, and stabilisation of P450, upon substrate binding was also demonstrated. CYP144 displays unusual azole coordination characteristics when examined by EPR and removal of the CYP144 gene from Mtb increased sensitivity of the strain to clotrimazole. Studies of these enzymes has advanced knowledge of P450 and Mtb redox chemistry, established roles for the MtbP450 cohort and identified the potential of anti-mycobacterial drugs and associated targets.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Strategies for climate change adaptation: lessons learnt from long-term planning in the Netherlands and Bangladesh
This paper evaluates long-term climate change adaptation strategies in the Netherlands and Bangladesh using the Organisation for Economic Co-operation and Development’s (OECD) Principles of Good Water Governance. Deltas face complex challenges, and adequate long-term planning is essential for these regions. However, experience with these long-term planning efforts and linkages with theoretical frameworks on water-related policy and strategy development remain limited. Both countries politically approved significant investment portfolios for a durable adaptive strategy. This paper highlights the similarities and differences in the resulting strategies. Using the learning assessment methodology, we propose to add risk-based approaches and long-term strategic perspectives as additional OECD Principles in the conclusion.Organisation & Governanc
Paintable Encapsulated Body-Temperature-Responsive Photonic Reflectors with Arbitrary Shapes
A temperature-responsive photonic coating on a flexible substrate was prepared by a photoinduced phase-separation process. In this coating a low molecular weight cholesteric liquid crystal (Ch-LC) mixture was encapsulated between the substrate and an in situ formed protective polymer top layer. The photonic coating showed a blue-shift of the photonic reflection band of 100 nm by heating from 22 to 23 °C due to the close proximity to the smectic to cholesteric phase transition and an overall 330 nm blue-shift while heating from 22 to 45 °C. Hence, the red coating turned green upon contact with skin within seconds. Furthermore, the coating structure and composition were investigated in detail, revealing a thick top coat. The adhesion of the coating was improved by providing trays on the substrate (by etching or 3D printing), resulting in a link between arbitrary-shaped substrates and the protective polymer top layer. These bendable coatings could be of interest for sensors, anticounterfeit labels, or customizable aesthetic applications
Ink-Deposited Transparent Electrochromic Structural Colored Foils
Despite progress in the field of electrochromic devices, developing structural color-tunable photonic systems having both high transparency and flexibility remains challenging. Here, an ink-deposited transparent electrochromic structural colored foil displaying reflective colors, tuned by an integrated heater, is prepared in a single-substrate method. Efficient and homogeneous heating is induced by a gravure printed silver nanowire-based substrate, delivering an electrothermal response upon applying an electrical potential. On top of this flexible, transparent heater, a cholesteric liquid crystal ink is bar-coated and subsequently photopolymerized, yielding a structural colored film that exhibits temperature-responsive color changes. The transparent electrochromic foils appear colorless at room temperature but demonstrate structural color tuning with high optical quality when modifying the electrical potential. Both optical and electrothermal performances were preserved when deforming the foils. Applying the conductive and structural colored inks via the easy processable, continuous methods of gravure printing and bar-coating highlights the potential for scaling up to large-scale stimuli-responsive, transparent optical foils. These transparent structural colored foils can be potentially used for a wide range of photonic devices including smart windows, displays, and sensors and can be directly installed on top of curved, flexible surfaces
Well-adhering, easily producible photonic reflective coatings for plastic substrates
\u3cp\u3eThe development of well-adhering, easily producible photonic reflective coatings is still a challenge. Here, an easy-to-produce, industrial viable process is reported that uses a primer layer of the so-called type II photoinitiator to obtain an excellent adhesion between a plastic substrate and one-dimensional (1D) photonic liquid crystalline coatings. Furthermore, a good alignment of the reactive cholesteric liquid crystal mixture is obtained using a bar-coating process, without alignment layers or surfactants. After photopolymerization, cross-hatch tape tests show a good adhesion of the photonic coating having a reflection band of 50% transmission with almost no scattering. Additionally, we demonstrate the ability to create well-adhering ∼100% reflective coatings by coating double layers and the ability to create single-layered cholesteric broadband reflectors using solely a reactivity gradient created by the primer layer. Our new interfacial method gives new opportunities to use reflecting 1D photonic coatings in industrial processes and applications and allows the bonding of almost any polymer to a plastic substrate.\u3c/p\u3
Well-adhering, easily producible photonic reflective coatings for plastic substrates
The development of well-adhering, easily producible photonic reflective coatings is still a challenge. Here, an easy-to-produce, industrial viable process is reported that uses a primer layer of the so-called type II photoinitiator to obtain an excellent adhesion between a plastic substrate and one-dimensional (1D) photonic liquid crystalline coatings. Furthermore, a good alignment of the reactive cholesteric liquid crystal mixture is obtained using a bar-coating process, without alignment layers or surfactants. After photopolymerization, cross-hatch tape tests show a good adhesion of the photonic coating having a reflection band of 50% transmission with almost no scattering. Additionally, we demonstrate the ability to create well-adhering ∼100% reflective coatings by coating double layers and the ability to create single-layered cholesteric broadband reflectors using solely a reactivity gradient created by the primer layer. Our new interfacial method gives new opportunities to use reflecting 1D photonic coatings in industrial processes and applications and allows the bonding of almost any polymer to a plastic substrate
Surgical outcomes of aortic valve repair for specific aortic valve cusp characteristics; retraction, calcification, and fenestration.
OBJECTIVES: We investigated the predictive value of aortic valve cusp retraction, calcification, and fenestration for aortic valvuloplasty feasibility. METHODS: Multicenter data were collected for 2082 patients who underwent surgical aortic valvuloplasty or aortic valve replacement. The study population had retraction, calcification, or fenestration in at least one aortic valve cusp. Controls had normal or prolapsed cusps. RESULTS: All cusp characteristics demonstrated significantly increased odds ratios [ORs] for switch to valve replacement. This effect was strongest for cusp retraction, followed by calcification and fenestration (OR, 25.14; P ≤ .001; OR, 13.50, P ≤ .001; OR, 12.32, P ≤ .001). Calcification and retraction displayed increased odds for developing grade 4 aortic regurgitation compared with grade 0 or 1 combined on average over time (OR, 6.67; P ≤ .001; OR, 4.13; P = .038). Patients with cusp retraction showed increased risk for reintervention at 1- and 2-year follow-up after aortic valvuloplasty (hazard ratio, 5.66; P ≤ .001; hazard ratio, 3.22, P = .007). Cusp fenestration was the only group showing neither an increased risk of postoperative severe aortic regurgitation (P = .57) or early reintervention (P = .88) compared with the control group. CONCLUSIONS: Aortic valve cusp retraction, calcification, and fenestration were all related to increased rates of switch to valve replacement. Calcification and retraction were associated with recurrence of severe aortic regurgitation. Retraction was related to early reintervention. Fenestration was neither associated with recurrence of severe aortic regurgitation or reintervention. This indicates that surgeons are well able to distinguish aortic valve repair candidates in patients with cusp fenestration
Effect of computed tomography before cardiac surgery on surgical strategy, mortality and stroke
Aim To investigate whether preoperative chest computed tomography (CT) decreases postoperative mortality and stroke rate in cardiac surgery by detection of calcifications and visualization of postoperative anatomy in redo cardiac surgery which can be used to optimize the surgical approach. Methods The PubMed, EMBASE and Cochrane databases were searched and articles concerning preoperative CT in cardiac surgery were included. Articles not reporting mortality, stroke rate or change in surgical approach were excluded. Studies concerning primary cardiac surgery as well as articles concerning redo cardiac surgery were both included. Results Eighteen studies were included (n = 4057 patients) in which 2584 patients received a preoperative CT. Seven articles (n = 1754 patients) concerned primary surgery and eleven articles (n = 2303 patients) concerned redo cardiac surgery. None of the studies was randomized but 8 studies provided a comparison to a control group. Stroke rate decreased with 77-96% (primary surgery) and 18-100% (redo surgery) in patients receiving a preoperative CT. Mortality decreased up to 66% in studies investigating primary surgery while the effect on mortality in redo surgery varied widely. Change in surgical approach based on CT-findings consisted of choosing a different cannulation site, opting for off-pump surgery and cancellation of surgery. Conclusions Current evidence suggests that preoperative CT imaging may lead to decreased stroke and mortality rate in patients undergoing primary cardiac surgery by optimizing surgical approach. In patients undergoing redo cardiac surgery stroke rate is also decreased but the effect on mortality is unclear. However, evidence is weak and included studies were of moderate quality