101 research outputs found
Multi-Gigabit Wireless data transfer at 60 GHz
In this paper we describe the status of the first prototype of the 60 GHz
wireless Multi-gigabit data transfer topology currently under development at
University of Heidelberg using IBM 130 nm SiGe HBT BiCMOS technology. The 60
GHz band is very suitable for high data rate and short distance applications as
for example needed in the HEP experments. The wireless transceiver consist of a
transmitter and a receiver. The transmitter includes an On-Off Keying (OOK)
modulator, an Local Oscillator (LO), a Power Amplifier (PA) and a BandPass
Filter (BPF). The receiver part is composed of a BandPass- Filter (BPF), a Low
Noise Amplifier (LNA), a double balanced down-convert Gilbert mixer, a Local
Oscillator (LO), then a BPF to remove the mixer introduced noise, an
Intermediate Amplifier (IF), an On-Off Keying demodulator and a limiting
amplifier. The first prototype would be able to handle a data-rate of about 3.5
Gbps over a link distance of 1 m. The first simulations of the LNA show that a
Noise Figure (NF) of 5 dB, a power gain of 21 dB at 60 GHz with a 3 dB
bandwidth of more than 20 GHz with a power consumption 11 mW are achieved.
Simulations of the PA show an output referred compression point P1dB of 19.7 dB
at 60 GHz.Comment: Proceedings of the WIT201
Development of Wireless Techniques in Data and Power Transmission - Application for Particle Physics Detectors
Wireless techniques have developed extremely fast over the last decade and
using them for data and power transmission in particle physics detectors is not
science- fiction any more. During the last years several research groups have
independently thought of making it a reality. Wireless techniques became a
mature field for research and new developments might have impact on future
particle physics experiments. The Instrumentation Frontier was set up as a part
of the SnowMass 2013 Community Summer Study [1] to examine the instrumentation
R&D for the particle physics research over the coming decades: {\guillemotleft}
To succeed we need to make technical and scientific innovation a priority in
the field {\guillemotright}. Wireless data transmission was identified as one
of the innovations that could revolutionize the transmission of data out of the
detector. Power delivery was another challenge mentioned in the same report. We
propose a collaboration to identify the specific needs of different projects
that might benefit from wireless techniques. The objective is to provide a
common platform for research and development in order to optimize effectiveness
and cost, with the aim of designing and testing wireless demonstrators for
large instrumentation systems
n-XYTER: A CMOS read-out ASIC for a new generation of high rate multichannel counting mode neutron detectors
For a new generation of 2-D neutron detectors developed in the framework of the EU NMI3 project DETNI [1], the 128-channel frontend chip n-XYTER has been designed. To facilitate the reconstruction of single neutron incidence points, the chip has to provide a spatial coordinate (represented by the channel number), as well as time stamp and amplitude information to match the data of x- and y-coordinates. While the random nature of the input signals calls for self-triggered operation of the chip, on-chip derandomisation and sparsi cation is required to exploit the enormous rate capability of these detectors ( 4 106cm2s1). The chosen architecture implements a preampli er driving two shapers with di erent time constants per channel. The faster shaper drives a single-pulse discriminator with subsequent time-walk compensation. The output of this circuit is used to latch a 14-bit time stamp with a 2 ns resolution and to enable a peak detector circuit fed by the slower shaper branch. The analogue output of the peak detector as well as the time stamp are stored in a 4-stage FIFO for derandomisation. The readout of these FIFOs is accomplished by a token-ring based multiplexer working at 32 MHz, which accounts for further derandomisation, sparsi cation and dynamic bandwidth distribution. The chip was submitted for manufacturing in AMS's C35B4M3 0.35µm CMOS technology in June 2006
Development of a selftriggered high counting rate ASIC for readout of 2D gas microstrip neutron detectors
In the frame of the DETNI project a 32-channel ASIC suitable for readout of a novel 2D thermal neutron detector based on a hybrid low-pressure Micro-Strip Gas Chamber with solid 157Gd converter has been developed. Each channel delivers position information, a fast time stamp of 2 ns resolution and the signal amplitude (called energy below). The time stamp is used for correlating the signals from X and Y strips while the amplitude is used for finding the center of gravity of a cluster of strips. The timing and energy information are stored in derandomizing buffers and read out via token ring architecture
Transition Radiation Spectroscopy with Prototypes of the ALICE TRD
We present measurements of the transition radiation (TR) spectrum produced in
an irregular radiator at different electron momenta. The data are compared to
simulations of TR from a regular radiator.Comment: 4 pages, 5 Figures, Proceedings for "TRDs for the 3rd millennium"
(Sept. 4-7, 2003, Bari, Italy
Position Reconstruction in Drift Chambers operated with Xe, CO2 (15%)
We present measurements of position and angular resolution of drift chambers
operated with a Xe,CO(15%) mixture. The results are compared to Monte Carlo
simulations and important systematic effects, in particular the dispersive
nature of the absorption of transition radiation and non-linearities, are
discussed. The measurements were carried out with prototype drift chambers of
the ALICE Transition Radiation Detector, but our findings can be generalized to
other drift chambers with similar geometry, where the electron drift is
perpendicular to the wire planes.Comment: 30 pages, 18 figure
The ALICE TPC, a large 3-dimensional tracking device with fast readout for ultra-high multiplicity events
The design, construction, and commissioning of the ALICE Time-Projection
Chamber (TPC) is described. It is the main device for pattern recognition,
tracking, and identification of charged particles in the ALICE experiment at
the CERN LHC. The TPC is cylindrical in shape with a volume close to 90 m^3 and
is operated in a 0.5 T solenoidal magnetic field parallel to its axis.
In this paper we describe in detail the design considerations for this
detector for operation in the extreme multiplicity environment of central
Pb--Pb collisions at LHC energy. The implementation of the resulting
requirements into hardware (field cage, read-out chambers, electronics),
infrastructure (gas and cooling system, laser-calibration system), and software
led to many technical innovations which are described along with a presentation
of all the major components of the detector, as currently realized. We also
report on the performance achieved after completion of the first round of
stand-alone calibration runs and demonstrate results close to those specified
in the TPC Technical Design Report.Comment: 55 pages, 82 figure
Alignment of the ALICE Inner Tracking System with cosmic-ray tracks
37 pages, 15 figures, revised version, accepted by JINSTALICE (A Large Ion Collider Experiment) is the LHC (Large Hadron Collider) experiment devoted to investigating the strongly interacting matter created in nucleus-nucleus collisions at the LHC energies. The ALICE ITS, Inner Tracking System, consists of six cylindrical layers of silicon detectors with three different technologies; in the outward direction: two layers of pixel detectors, two layers each of drift, and strip detectors. The number of parameters to be determined in the spatial alignment of the 2198 sensor modules of the ITS is about 13,000. The target alignment precision is well below 10 micron in some cases (pixels). The sources of alignment information include survey measurements, and the reconstructed tracks from cosmic rays and from proton-proton collisions. The main track-based alignment method uses the Millepede global approach. An iterative local method was developed and used as well. We present the results obtained for the ITS alignment using about 10^5 charged tracks from cosmic rays that have been collected during summer 2008, with the ALICE solenoidal magnet switched off.Peer reviewe
The upgrade of the ALICE TPC with GEMs and continuous readout
The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020.publishedVersio
- …