Intrathecal B-cell activation in LGI1 antibody encephalitis.

ObjectiveTo study intrathecal B-cell activity in leucine-rich, glioma-inactivated 1 (LGI1) antibody encephalitis. In patients with LGI1 antibodies, the lack of CSF lymphocytosis or oligoclonal bands and serum-predominant LGI1 antibodies suggests a peripherally initiated immune response. However, it is unknown whether B cells within the CNS contribute to the ongoing pathogenesis of LGI1 antibody encephalitis.MethodsPaired CSF and peripheral blood (PB) mononuclear cells were collected from 6 patients with LGI1 antibody encephalitis and 2 patients with other neurologic diseases. Deep B-cell immune repertoire sequencing was performed on immunoglobulin heavy chain transcripts from CSF B cells and sorted PB B-cell subsets. In addition, LGI1 antibody levels were determined in CSF and PB.ResultsSerum LGI1 antibody titers were on average 127-fold higher than CSF LGI1 antibody titers. Yet, deep B-cell repertoire analysis demonstrated a restricted CSF repertoire with frequent extensive clusters of clonally related B cells connected to mature PB B cells. These clusters showed intensive mutational activity of CSF B cells, providing strong evidence for an independent CNS-based antigen-driven response in patients with LGI1 antibody encephalitis but not in controls.ConclusionsOur results demonstrate that intrathecal immunoglobulin repertoire expansion is a feature of LGI1 antibody encephalitis and suggests a need for CNS-penetrant therapies

Designs and Optical Tests of Thermal Links for an Optical Refrigerator

Dielectric mirror leakage at large angles of incidence limits the effectiveness of solid state optical refrigerators due to reheating caused by photon absorption in an attached load. In this paper, we present several thermally conductive link solutions to greatly reduce the net photon absorption. The Los Alamos Solid State Optical Refrigerator (LASSOR) has demonstrated cooling of a Yb/sup 3+/ doped ZBLANP glass to 208 K. We have designed optically isolating thermal link geometries capable of extending cooling to a typical heat load with minimal absorptive reheating, and we have tested the optical performance of these designs. A surrogate source operating at 625 nm was used to mimic the angular distribution of light from the LASSOR cooling element. While total link performance is dependent on additional factors, we have found that the best thermal link reduced the net transmission of photons to 0.04%, which includes the trapping mirrors 8.1% transmission. Our measurements of the optical performance of the various link geometries are supported by computer simulations of the designs using Code V, a commercially available optical modeling software package

Computer Modeling and Analysis of Thermal Link Performance for an Optical Refrigerator

We have used the thermal modeling tool in COMSOL Multiphysics to investigate factors that affect the thermal performance of the optical refrigerator. Assuming an ideal cooling element and a non-absorptive dielectric trapping mirror, the three dominant heating factors are blackbody radiation from the surrounding environment, conductive heat transfer through mechanical supports, and the absorption of fluorescent photons transmitted through the thermal link. Laboratory experimentation coupled with computer modeling using Code V optical software have resulted in link designs capable of reducing the transmission to 0.04% of the fluoresced photons emitted toward the thermal link. The ideal thermal link will have minimal surface area, provide complete optical isolation for the load, and possess high thermal conductivity. Modeling results imply that a 1 cm/sup 3/ load can be chilled to 102 K with currently available cooling efficiencies using a 100 W pump laser on a YB:ZBLANP system, and using an ideal link that has minimal surface area and no optical transmission. We review the simulated steady-state cooling temperatures reached by the heat load for several link designs and system configurations as a comparative measure of how well particular configurations perform

Prevalence and determinants of the use of self-tests by members of the public: a mixed methods study

Background Self-tests can be used by members of the public to diagnose conditions without involving a doctor, nurse or other health professional. As technologies to design and manufacture diagnostic tests have developed, a range of self-tests have become available to the public to buy over-the-counter and via the Internet. This study aims to describe how many people have used self-tests and identify factors associated with their use. Methods A postal questionnaire will elicit basic information, including sociodemographic characteristics, and whether the person has used or would use specified self-tests. Consent will be sought to recontact people who want to participate further in the study, and interviews and focus groups will be used to develop hypotheses about factors associated with self-test use. These hypotheses will be tested in a case-control study. An in-depth questionnaire will be developed incorporating the identified factors. This will be sent to: people who have used a self-test (cases); people who have not used a self-test but would use one in the future (controls); and people who have not used and would not use a self-test (controls). Logistic regression analysis will be used to establish which factors are associated with self-test use. Discussion Self-tests do have potential benefits, for example privacy and convenience, but also potential harms, for example delay seeking treatment after a true negative result when the symptoms are actually due to another condition. It is anticipated that the outcomes from this study will include recommendations about how to improve the appropriate use of self-tests and existing health services, as well as information to prepare health professionals for patients who have used self-tests

Regionalizing the infrastructure turn : a research agenda

An interdisciplinary ‘infrastructure turn’ has emerged over the past 20 years that disputes the concept of urban infrastructure as a staid or neutral set of physical artefacts. Responding to the increased conceptual, geographical and political importance of infrastructure – and endemic issues of access, expertise and governance that the varied provision of infrastructures can cause – this intervention asserts the significance of applying a regional perspective to the infrastructure turn. This paper forwards a critical research agenda for the study of ‘infrastructural regionalisms’ to interrogate: (1) how we study and produce knowledge about infrastructure; (2) how infrastructure is governed across or constrained by jurisdictional boundaries; (3) who drives the construction of regional infrastructural imaginaries; and (4) how individuals and communities differentially experience regional space through infrastructure. Analysing regions through infrastructure provides a novel perspective on the regional question and consequently offers a framework to understand better the implications of the current infrastructure moment for regional spaces worldwide

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction