Tension at the borders: perceptions of role overload, conflict, strain and facilitation in work, family and health roles among employed individuals with arthritis

Objective. To examine inter-relationships among arthritis (A), work (W) and personal life (P) roles and their reciprocal influences, especially experiences of role balance/imbalance among individuals with inflammatory arthritis (IA) and OA

Stable ultrahigh-density magneto-optical recordings using introduced linear defects

The stability of data bits in magnetic recording media at ultrahigh densities is compromised by thermal `flips' -- magnetic spin reversals -- of nano-sized spin domains, which erase the stored information. Media that are magnetized perpendicular to the plane of the film, such as ultrathin cobalt films or multilayered structures, are more stable against thermal self-erasure than conventional memory devices. In this context, magneto-optical memories seem particularly promising for ultrahigh-density recording on portable disks, and bit densities of $\sim$100 Gbit inch$^{-2}$ have been demonstrated using recent advances in the bit writing and reading techniques. But the roughness and mobility of the magnetic domain walls prevents closer packing of the magnetic bits, and therefore presents a challenge to reaching even higher bit densities. Here we report that the strain imposed by a linear defect in a magnetic thin film can smooth rough domain walls over regions hundreds of micrometers in size, and halt their motion. A scaling analysis of this process, based on the generic physics of disorder-controlled elastic lines, points to a simple way by which magnetic media might be prepared that can store data at densities in excess of 1 Tbit inch$^{-2}$.Comment: 5 pages, 4 figures, see also an article in TRN News at http://www.trnmag.com/Stories/041801/Defects_boost_disc_capacity_041801.htm

The effect on work presenteeism of job retention vocational rehabilitation compared to a written self-help work advice pack for employed people with inflammatory arthritis: protocol for a multi-centre randomised controlled trial (the WORKWELL trial)

Abstract: Background: Work problems are common in people with inflammatory arthritis. Up to 50% stop work within 10 years due to their condition and up to 67% report presenteeism (i.e. reduced work productivity), even amongst those with low disease activity. Job retention vocational rehabilitation (JRVR) may help prevent or postpone job loss and reduce presenteeism through work assessment, work-related rehabilitation and enabling job accommodations. This aims to create a better match between the person’s abilities and their job demands. The objectives of the Workwell trial are to test the overall effectiveness and cost-effectiveness of JRVR (WORKWELL) provided by additionally trained National Health Service (NHS) occupational therapists compared to a control group who receive self-help information both in addition to usual care. Methods: Based on the learning from a feasibility trial (the WORK-IA trial: ISRCTN76777720), the WORKWELL trial is a multi-centre, pragmatic, individually-randomised parallel group superiority trial, including economic evaluation, contextual factors analysis and process evaluation. Two hundred forty employed adults with rheumatoid arthritis, undifferentiated inflammatory arthritis or psoriatic arthritis (in secondary care), aged 18 years or older with work instability will be randomised to one of two groups: a self-help written work advice pack plus usual care (control intervention); or WORKWELL JRVR plus a self-help written work advice pack and usual care. WORKWELL will be delivered by occupational therapists provided with additional JRVR training from the research team. The primary outcome is presenteeism as measured using the Work Limitations Questionnaire-25. A comprehensive range of secondary outcomes of work, health, contextual factors and health resource use are included. Outcomes are measured at 6- and 12- months (with 12-months as the primary end-point). A multi-perspective within-trial cost-effectiveness analyses will also be conducted. Discussion: This trial will contribute to the evidence base for provision of JRVR to people with inflammatory arthritis. If JRVR is found to be effective in enabling people to keep working, the findings will support decision-making about provision of JRVR by rheumatology teams, therapy services and healthcare commissioners, and providing evidence of the effectiveness of JRVR and the economic impact of its implementation. Trial registration: Clinical Trials.Gov: NCT03942783. Registered 08/05/2019 (https://clinicaltrials.gov/ct2/show/NCT03942783); ISRCTN Registry: ISRCTN61762297. Registered:13/05/2019 (http://www.isrctn.com/ISRCTN61762297). Retrospectively registered

Social role participation questionnaire for patients with ankylosing spondylitis: Translation into Dutch, reliability and construct validity

Objective: The Social Role Participation Questionnaire (SRPQ) assesses the influence of health on participation in 11 specific and one general participation role across 4 participation dimensions: 'importance', 'satisfaction with time', 'satisfaction with performance' and 'physical difficulty'. This study aimed to translate the SRPQ into Dutch, and assess the clinimetric properties and aspects of its validity among patients with ankylosing spondylitis (AS). Methods: Translation was performed using the dual panel approach. For each participation dimension, internal consistency, test-retest reliability (n=31), and construct validity were assessed in 246 patients with AS. Results: The translation required only minor adaptations. Cronbach αs were α≥0.7. A strong correlation was present between satisfaction with 'time' and 'performance'(r=0.85). Test-retest reliability was satisfactory (κ=0.79-0.95). Correlations with participation domains of the Short- Form Health Survey 36 (SF-36), the WHO Disease Assessment Score II, and generic as well as disease-specific health outcomes (Physical and Mental component scale of the SF-36, Satisfaction With Life Scale, Bath Ankylosing Spondy

The three-dimensional easy morphological (3-DEMO) classification of scoliosis, part II: repeatability

BACKGROUND: In the first part of this study we proposed a new classification approach for spinal deformities (3-DEMO). To be valid, a classification needs to overcome the repeatability issue which is inherent both in the used classificatory system and in the measured object. AIM: The aim of this study is to present procedures and results obtained within the repeatability of 3-DEMO classification for scoliosis analysis. METHOD: We acquired the data of 100 pathological and 20 normal spines with an optoelectronic system (AUSCAN) and of two dummies with simulated spine deformity. On the obtained 3D reconstruction of the spine, we considered the coronal view with a spinal reference system (Top View) and its three related parameters, defined in part I, constituting the 3-DEMO classification. We calculated the repeatability coefficient for the subjects (two acquisitions for each subject with a time interval of 26 ± 12 sec), whereas we evaluated the system measurement error calculating the standard deviation of 50 consecutive acquisitions for each dummy. RESULTS: Comparing the results of the two types of acquisition, it emerged that the main part of parameters variability was due to postural adjustments The proportion of agreement for the 3-DEMO parameters gives a k value above 0.8; almost 10% of patients changed classification because of postural adjustments, but none had a "mirror-like" variation nor a change in more of one parameter at a time Repeatability coefficient is lower than the previously calculated normative limits. DISCUSSION: The 3-DEMO classification has a high repeatability when evaluated with an optoelectronic system such as the AUSCAN System, whose systematic error is very low. This means that the implied physiological phenomenon is consistent and overcomes the postural variability inherent in the measured object (normal or pathological subject)

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Search for direct stau production in events with two hadronic tau-leptons in root s=13 TeV pp collisions with the ATLAS detector

A search for the direct production of the supersymmetric partners ofτ-leptons (staus) in final stateswith two hadronically decayingτ-leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of139fb−1, recorded with the ATLAS detector at the LargeHadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected StandardModel background is observed. Limits are derived in scenarios of direct production of stau pairs with eachstau decaying into the stable lightest neutralino and oneτ-lepton in simplified models where the two staumass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidencelevel for a massless lightest neutralino