Comparative assessment of RAMS and WRF short-term forecasts over Eastern Iberian Peninsula using various in-situ observations, remote sensing products and uncoupled land surface model datasets

The Regional Atmospheric Modeling System (RAMS) and the Weather Research and Forecasting (WRF) mesoscale models are being used for weather and air quality studies as well as forecasting tools in Numerical Weather Prediction (NWP) systems. In the current study, we perform a comparative assessment of these models under distinct typical atmospheric conditions, classified according to the dominant wind flow and cloudiness, over Eastern Iberian Peninsula. This study is focused on the model representation of key physical processes in terms of meteorology and surface variables during a 7-days period in summer 2011. The hourly outputs produced by these two models are compared not only with observed standard surface variables, measured at different permanent weather stations located over the region of study, but also with different surface remote sensing products and uncoupled Land Surface Models (LSM) datasets. Confronting RAMS and WRF, the current study highlights relevant differences over areas near the coast when mesoscale circulations or Eastern synoptic advections are developed over the region of study. A higher moisture content is observed under these atmospheric conditions, due to the moisture transport by the sea breeze inland. In this regard, it has been found that the Eastern wind field simulated by WRF reaches inland areas and comprises a larger sea breeze extension than RAMS. This sea breeze development impacts meteorology and surface variables in locations not too close to the coast, but still affected by land-sea winds. Additionally, WRF remains more windy and moister than RAMS at night-time, while alike results are found under Western synoptic advections. The results obtained in the current paper show differences under distinct dominant atmospheric conditions, which outline further research in this field in order to achieve more general conclusions

Improved meteorology and surface fluxes in mesoscale modelling using adjusted initial vertical soil moisture profiles

The Regional Atmospheric Modeling System (RAMS) is being used for different and diverse purposes, ranging from atmospheric and dispersion of pollutants forecasting to agricultural meteorology and ecological modelling as well as for hydrological purposes, among others. The current paper presents a comprehensive assessment of the RAMS forecasts, comparing the results not only with observed standard surface meteorological variables, measured at FLUXNET stations and other portable and permanent weather stations located over the region of study, but also with non-standard observed variables, such as the surface energy fluxes, with the aim of evaluating the surface energy budget and its relation with a proper representation of standard observations and key physical processes for a wide range of applications. In this regard, RAMS is assessed against in-situ surface observations during a selected period within July 2011 over Eastern Spain. In addition, the simulation results are also compared with different surface remote sensing data derived from the Meteosat Second Generation (MSG) Spinning Enhanced Visible and Infrared Imager (SEVIRI) (MSG-SEVIRI) as well as the uncoupled Land Surface Models (LSM) Global Land Data Assimilation System (GLDAS). Both datasets complement the available in-situ observations and are used in the current study as the reference or ground truth when no observations are available on a selected location. Several sensitivity tests have been performed involving the initial soil moisture content, by adjusting this parameter in the vertical soil profile ranging from the most superficial soil layers to those located deeper underground. A refined adjustment of this parameter in the initialization of the model has shown to better represent the observed surface energy fluxes. The results obtained also show an improvement in the model forecasts found in previous studies in relation to standard observations, such as the air temperature and the moisture fields. Therefore, the application of a drier or wetter soil in distinct soil layers within the whole vertical soil profile has been found to be crucial in order to produce a better agreement between the simulation and the observations, thus reiterating the determining role of the initial soil moisture field in mesoscale modelling, but in this case considering the variation of this parameter vertically

New mechanism for continuous and bidirectional displacement of heavy structures: Design and analysis

The aim of this paper is to design and study a new mechanism for moving heavy structures using the force of friction. The mechanism designed is called DCACLM and was patented in 2011. This new device is based on an inverted crawler which is able to displace heavy structures such as large span bridges in a continuous and bidirectional way. Furthermore, the DCACLM design has taken into account other important aspects such as safety and sustainability in order to develop new construction methods. Nonlinear numerical models using the Finite Element Method have been developed to study the complex structural behavior of this new mechanism. The main conclusions provide acceptable results in terms of stresses and strains for the main elements of DCACLM.the authors wish to acknowledge the financial support provided by the Spanish Ministry of Science and Innovation with funds from ALCANZA Research Project number IPT-380000-2010-12. This project has been co-financed with FEDER funds, “A Way of Making Europe”

The molecular basis and biologic significance of the β-dystroglycan-emerin interaction

β-dystroglycan (β-DG) assembles with lamins A/C and B1 and emerin at the nuclear envelope (NE) to maintain proper nuclear architecture and function. To provide insight into the nuclear function of β-DG, we characterized the interaction between β-DG and emerin at the molecular level. Emerin is a major NE protein that regulates multiple nuclear processes and whose deficiency results in Emery–Dreifuss muscular dystrophy (EDMD). Using truncated variants of β-DG and emerin, via a series of in vitro and in vivo binding experiments and a tailored computational analysis, we determined that the β-DG–emerin interaction is mediated at least in part by their respective transmembrane domains (TM). Using surface plasmon resonance assays we showed that emerin binds to β-DG with high affinity (KD in the nanomolar range). Remarkably, the analysis of cells in which DG was knocked out demonstrated that loss of β-DG resulted in a decreased emerin stability and impairment of emerin-mediated processes. β-DG and emerin are reciprocally required for their optimal targeting within the NE, as shown by immunofluorescence, western blotting and immunoprecipitation assays using emerin variants with mutations in the TM domain and B-lymphocytes of a patient with EDMD. In summary, we demonstrated that β-DG plays a role as an emerin interacting partner modulating its stability and function

Modifiable risk factors associated with prediabetes in men and women: A cross-sectional analysis of the cohort study in primary health care on the evolution of patients with prediabetes

Background: Prediabetes is a high-risk state for diabetes development, but little is known about the factors associated with this state. The aim of the study was to identify modifiable risk factors associated with the presence of prediabetes in men and women. Methods: Cohort Study in Primary Health Care on the Evolution of Patients with Prediabetes (PREDAPS-Study) is a prospective study on a cohort of 1184 subjects with prediabetes and another cohort of 838 subjects without glucose metabolism disorders. It is being conducted by 125 general practitioners in Spain. Data for this analysis were collected during the baseline stage in 2012. The modifiable risk factors included were: smoking habit, alcohol consumption, low physical activity, inadequate diet, hypertension, dyslipidemia, and obesity. To assess independent association between each factor and prediabetes, odds ratios (ORs) were estimated using logistic regression models. Results: Abdominal obesity, low plasma levels of high-density lipoprotein cholesterol (HDL-cholesterol), and hypertension were independently associated with the presence of prediabetes in both men and women. After adjusting for all factors, the respective ORs (95% Confidence Intervals) were 1.98 (1.41-2.79), 1.88 (1.23-2.88) and 1.86 (1.39-2.51) for men, and 1.89 (1.36-2.62), 1.58 (1.12-2.23) and 1.44 (1.07-1.92) for women. Also, general obesity was a risk factor in both sexes but did not reach statistical significance among men, after adjusting for all factors. Risky alcohol consumption was a risk factor for prediabetes in men, OR 1.49 (1.00-2.24). Conclusions: Obesity, low HDL-cholesterol levels, and hypertension were modifiable risk factors independently related to the presence of prediabetes in both sexes. The magnitudes of the associations were stronger for men than women. Abdominal obesity in both men and women displayed the strongest association with prediabetes. The findings suggest that there are some differences between men and women, which should be taken into account when implementing specific recommendations to prevent or delay the onset of diabetes in adult population

Atmospheric effects on extensive air showers observed with the Surface Detector of the Pierre Auger Observatory

Atmospheric parameters, such as pressure (P), temperature (T) and density, affect the development of extensive air showers initiated by energetic cosmic rays. We have studied the impact of atmospheric variations on extensive air showers by means of the surface detector of the Pierre Auger Observatory. The rate of events shows a ~10% seasonal modulation and ~2% diurnal one. We find that the observed behaviour is explained by a model including the effects associated with the variations of pressure and density. The former affects the longitudinal development of air showers while the latter influences the Moliere radius and hence the lateral distribution of the shower particles. The model is validated with full simulations of extensive air showers using atmospheric profiles measured at the site of the Pierre Auger Observatory.Comment: 24 pages, 9 figures, accepted for publication in Astroparticle Physic

The exposure of the hybrid detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a detector for ultra-high energy cosmic rays. It consists of a surface array to measure secondary particles at ground level and a fluorescence detector to measure the development of air showers in the atmosphere above the array. The "hybrid" detection mode combines the information from the two subsystems. We describe the determination of the hybrid exposure for events observed by the fluorescence telescopes in coincidence with at least one water-Cherenkov detector of the surface array. A detailed knowledge of the time dependence of the detection operations is crucial for an accurate evaluation of the exposure. We discuss the relevance of monitoring data collected during operations, such as the status of the fluorescence detector, background light and atmospheric conditions, that are used in both simulation and reconstruction.Comment: Paper accepted by Astroparticle Physic

The Fluorescence Detector of the Pierre Auger Observatory

The Pierre Auger Observatory is a hybrid detector for ultra-high energy cosmic rays. It combines a surface array to measure secondary particles at ground level together with a fluorescence detector to measure the development of air showers in the atmosphere above the array. The fluorescence detector comprises 24 large telescopes specialized for measuring the nitrogen fluorescence caused by charged particles of cosmic ray air showers. In this paper we describe the components of the fluorescence detector including its optical system, the design of the camera, the electronics, and the systems for relative and absolute calibration. We also discuss the operation and the monitoring of the detector. Finally, we evaluate the detector performance and precision of shower reconstructions.Comment: 53 pages. Submitted to Nuclear Instruments and Methods in Physics Research Section

Near-intrinsic energy resolution for 30-662 keV gamma rays in a high pressure xenon electroluminescent TPC

We present the design, data and results from the NEXT prototype for Double Beta and Dark Matter (NEXT-DBDM) detector, a high-pressure gaseous natural xenon electroluminescent time projection chamber (TPC) that was built at the Lawrence Berkeley National Laboratory. It is a prototype of the planned NEXT-100 136Xe neutrino-less double beta decay (0νββ) experiment with the main objectives of demonstrating near-intrinsic energy resolution at energies up to 662 keV and of optimizing the NEXT-100 detector design and operating parameters. Energy resolutions of ∼1% FWHM for 662 keV gamma rays were obtained at 10 and 15 atm and ∼5% FWHM for 30 keV fluorescence xenon X-rays. These results demonstrate that 0.5% FWHM resolutions for the 2,459 keV hypothetical neutrino-less double beta decay peak are realizable. This energy resolution is a factor 7 to 20 better than that of the current leading 0νββ experiments using liquid xenon and thus represents a significant advancement. We present also first results from a track imaging system consisting of 64 silicon photo-multipliers recently installed in NEXT-DBDM that, along with the excellent energy resolution, demonstrates the key functionalities required for the NEXT-100 0νββ search