Sonosynthesis of microcellulose from kenaf fiber: optimization of process parameters

Green composites using cellulose fibers as a reinforcement material provide a sustainable and renewable alternative to petroleum-based polymers. However, controlling the usage of chemicals and processing parameters to extract the cellulose could be sometimes difficult. Therefore, this study aims to optimize the conditions for extracting the microcellulose from kenaf fibers using central composite design (CCD), a statistical tool in design of experiments. Three factors and three levels were chosen for carrying out the analysis. The design was based on sodium hydroxide (NaOH) dosage, Sodium Chlorite (NaClO2) dosage and sonication time as independent variables, while dependent variables were the fiber size and degradation point. Later, size responses were fitted using quadratic polynomial model and degradation responses using 2-factor interaction model (2FI). The R2 values of 0.89 and 0.83 were obtained for the quadratic and the 2FI model, respectively. Further, surface morphology, thermal analysis, Fourier transform infrared (FTIR) spectroscopy and X-Ray diffraction (XRD) were also used for design validation. Optimal parameters for microcellulose extraction were found to be 0.15 g of NaOH at first stage, 4.6 mL of NaClO2 at second stage, and 10 min of sonication during third stage

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

Search for direct stau production in events with two hadronic tau-leptons in root s=13 TeV pp collisions with the ATLAS detector

A search for the direct production of the supersymmetric partners ofτ-leptons (staus) in final stateswith two hadronically decayingτ-leptons is presented. The analysis uses a dataset of pp collisions corresponding to an integrated luminosity of139fb−1, recorded with the ATLAS detector at the LargeHadron Collider at a center-of-mass energy of 13 TeV. No significant deviation from the expected StandardModel background is observed. Limits are derived in scenarios of direct production of stau pairs with eachstau decaying into the stable lightest neutralino and oneτ-lepton in simplified models where the two staumass eigenstates are degenerate. Stau masses from 120 GeV to 390 GeV are excluded at 95% confidencelevel for a massless lightest neutralino

Bilateral asynchronous acute epidural hematoma : a case report

BACKGROUND: Bilateral extradural hematomas have only rarely been reported in the literature. Even rarer are cases where the hematomas develop sequentially, one after removal of the other. Among 187 cases of operated epidural hematomas during past 4 years in our hospital, we found one case of sequentially developed bilateral epidural hematoma. CASE PRESENTATION: An 18-year-old conscious male worker was admitted to our hospital after a fall. After deterioration of his consciousness, an emergency brain CT scan showed a right temporoparietal epidural hematoma. The hematoma was evacuated, but the patient did not improve afterwards. Another CT scan showed contralateral epidural hematoma and the patient was reoperated. Postoperatively, the patient recovered completely. CONCLUSIONS: This case underlines the need for monitoring after an operation for an epidural hematoma and the need for repeat brain CT scans if the patient does not recover quickly after removal of the hematoma, especially if the first CT scan has been done less than 6 hours after the trauma. Intraoperative brain swelling can be considered as a clue for the development of contralateral hematoma

Results from the translation and adaptation of the Iranian Short-Form McGill Pain Questionnaire (I-SF-MPQ): preliminary evidence of its reliability, construct validity and sensitivity in an Iranian pain population

<p>Abstract</p> <p>Background</p> <p>The Short Form McGill Pain Questionnaire (SF-MPQ) is one of the most widely used instruments to assess pain. The aim of this study was to translate and culturally adapt the questionnaire for Farsi (the official language of Iran) speakers in order to test its reliability and sensitivity.</p> <p>Methods</p> <p>We followed Guillemin's guidelines for cross-cultural adaption of health-related measures, which include forward-backward translations, expert committee meetings, and face validity testing in a pilot group. Subsequently, the questionnaire was administered to a sample of 100 diverse chronic pain patients attending a tertiary pain and rehabilitation clinic. In order to evaluate test-retest reliability, patients completed the questionnaire in the morning and early evening of their first visit. Finally, patients were asked to complete the questionnaire for the third time after completing a standardized treatment protocol three weeks later. Intraclass correlation coefficient (ICC) was used to evaluate reliability. We used principle component analysis to assess construct validity.</p> <p>Results</p> <p>Ninety-two subjects completed the questionnaire both in the morning and in the evening of the first visit (test-retest reliability), and after three weeks (sensitivity to change). Eight patients who did not finish treatment protocol were excluded from the study. Internal consistency was found by Cronbach's alpha to be 0.951, 0.832 and 0.840 for sensory, affective and total scores respectively. ICC resulted in 0.906 for sensory, 0.712 for affective and 0.912 for total pain score. Item to subscale score correlations supported the convergent validity of each item to its hypothesized subscale. Correlations were observed to range from r²= 0.202 to r²= 0.739. Sensitivity or responsiveness was evaluated by pair t-test, which exhibited a significant difference between pre- and post-treatment scores (p < 0.001).</p> <p>Conclusion</p> <p>The results of this study indicate that the Iranian version of the SF-MPQ is a reliable questionnaire and responsive to changes in the subscale and total pain scores in Persian chronic pain patients over time.</p

Very Low Tidal Volume Ventilation with Associated Hypercapnia - Effects on Lung Injury in a Model for Acute Respiratory Distress Syndrome

BACKGROUND: Ventilation using low tidal volumes with permission of hypercapnia is recommended to protect the lung in acute respiratory distress syndrome. However, the most lung protective tidal volume in association with hypercapnia is unknown. The aim of this study was to assess the effects of different tidal volumes with associated hypercapnia on lung injury and gas exchange in a model for acute respiratory distress syndrome. METHODOLOGY/PRINCIPAL FINDINGS: In this randomized controlled experiment sixty-four surfactant-depleted rabbits were exposed to 6 hours of mechanical ventilation with the following targets: Group 1: tidal volume = 8-10 ml/kg/PaCO(2) = 40 mm Hg; Group 2: tidal volume = 4-5 ml/kg/PaCO(2) = 80 mm Hg; Group 3: tidal volume = 3-4 ml/kg/PaCO(2) = 120 mm Hg; Group 4: tidal volume = 2-3 ml/kg/PaCO(2) = 160 mm Hg. Decreased wet-dry weight ratios of the lungs, lower histological lung injury scores and higher PaO(2) were found in all low tidal volume/hypercapnia groups (group 2, 3, 4) as compared to the group with conventional tidal volume/normocapnia (group 1). The reduction of the tidal volume below 4-5 ml/kg did not enhance lung protection. However, oxygenation and lung protection were maintained at extremely low tidal volumes in association with very severe hypercapnia and no adverse hemodynamic effects were observed with this strategy. CONCLUSION: Ventilation with low tidal volumes and associated hypercapnia was lung protective. A tidal volume below 4-5 ml/kg/PaCO(2) 80 mm Hg with concomitant more severe hypercapnic acidosis did not increase lung protection in this surfactant deficiency model. However, even at extremely low tidal volumes in association with severe hypercapnia lung protection and oxygenation were maintained

DijetGAN:A Generative-Adversarial Network Approach for the Simulation of QCD Dijet Events at the LHC

A Generative-Adversarial Network (GAN) based on convolutional neural networks is used to simulate the production of pairs of jets at the LHC. The GAN is trained on events generated using MadGraph5 + Pythia8, and Delphes3 fast detector simulation. We demonstrate that a number of kinematic distributions both at Monte Carlo truth level and after the detector simulation can be reproduced by the generator network with a very good level of agreement. The code can be checked out or forked from the publicly accessible online repository https://gitlab.cern.ch/disipio/DiJetGAN .Comment: 17 pages, 8 figure

Electron and photon energy calibration with the ATLAS detector using 2015–2016 LHC proton-proton collision data

This paper presents the electron and photon energy calibration obtained with the ATLAS detector using about 36 fb−1 of LHC proton-proton collision data recorded at √s = 13 TeV in 2015 and 2016. The different calibration steps applied to the data and the optimization of the reconstruction of electron and photon energies are discussed. The absolute energy scale is set using a large sample of Z boson decays into electron-positron pairs. The systematic uncertainty in the energy scale calibration varies between 0.03% to 0.2% in most of the detector acceptance for electrons with transverse momentum close to 45 GeV. For electrons with transverse momentum of 10 GeV the typical uncertainty is 0.3% to 0.8% and it varies between 0.25% and 1% for photons with transverse momentum around 60 GeV. Validations of the energy calibration with J/ψ → e + e − decays and radiative Z boson decays are also presented