Reduction of Volatile Organic Compounds Emitted during Kiln Drying of Southern Yellow Pine Lumber

The objective of the research is to reduce the volatile organic compounds (VOCs) emitted during kiln drying of southern yellow pine (SYP) lumber. Three treatment methods were explored to determine their effect on VOC emissions. The three methods were configured at the air exhaust of a pilot-scale dry kiln. 1) A steel reactor containing copper tubing heated to 100°, 200°, and 240° Celsius was evaluated. Temperature did not statistically affect VOC emissions (p-value = 0.1674). The average reduction of VOCs at 240° C was seven percent. 2) The use of hydrogen peroxide and ultra-violet (UV) light did not reduce VOCs emitted during kiln drying. 3) The use of Fenton?s reagent, with hydrogen peroxide and ferrous sulfate, also did not reduce VOCs emitted during kiln drying. 4) It is recommended that future studies with copper heated to temperatures above 240° C be performed

Women’s experiences of decision-making and informed choice about pregnancy and birth care: a systematic review and meta-synthesis of qualitative research

Background The purpose of this systematic review (PROSPERO Ref: CRD42017053264) was to describe and interpret the qualitative research on parent’s decision-making and informed choice about their pregnancy and birth care. Given the growing evidence on the benefits of different models of maternity care and the prominence of informed choice in health policy, the review aimed to shed light on the research to date and what the findings indicate. Methods a systematic search and screening of qualitative research concerning parents’ decision-making and informed choice experiences about pregnancy and birth care was conducted using PRISMA guidelines. A meta-synthesis approach was taken for the extraction and analysis of data and generation of the findings. Studies from 1990s onwards were included to reflect an era of policies promoting choice in maternity care in high-income countries. Results Thirty-seven original studies were included in the review. A multi-dimensional conceptual framework was developed, consisting of three analytical themes (‘Uncertainty’, ‘Bodily autonomy and integrity’ and ‘Performing good motherhood’) and three inter-linking actions (‘Information gathering,’ ‘Aligning with a birth philosophy,’ and ‘Balancing aspects of a choice’). Conclusions Despite the increasing research on decision-making, informed choice is not often a primary research aim, and its development in literature published since the 1990s was difficult to ascertain. The meta-synthesis suggests that decision-making is a dynamic and temporal process, in that it is made within a defined period and invokes both the past, whether this is personal, familial, social or historical, and the future. Our findings also highlighted the importance of embodiment in maternal health experiences, particularly when it comes to decision-making about care. Policymakers and practitioners alike should examine critically current choice frameworks to ascertain whether they truly allow for flexibility in decision-making. Health systems should embrace more fluid, personalised models of care to augment service users’ decision-making agency

Decay and environmental studies on southern pine

This work focused on decay and dimensional stability of southern pine lumber and environmental issues associated with emissions released during kiln drying of southern pine. In one study decking boards were treated with a 3% resin acid solution to increase the dimensional stability. The boards were placed on a roof and weathered for two years. The increased water repellency reduced moisture gain following summer rainstorms by one-third compared to untreated matched samples, this significantly reduced splitting by half and cupping by one-third. In one study decking boards from matched samples were weathered for two years in the roof setup described above, and in a fungal ground proximity test. The ground proximity samples had slightly more decay than the roof samples. Correlation between decay ratings for the matched samples was 37%, suggesting above-ground decay susceptibility is dependent on the macro- and micro-environment. Decay in roof exposure was modeled based on moisture content factors, whereas decay in ground proximity was modeled by the resin and fatty acids. One study tested pole sections with varying amounts of sapwood, heartwood, and knots dried in a pilot-scale kiln. A sample of the kiln exhaust was measured for volatile organic compounds. Emissions from poles were similar to clear lumber. Emissions from heartwood poles were less than for heartwood lumber, perhaps due to the poles’ sapwood band. The final study was conducted with clear and knotty lumber kiln dried to below 8% moisture content using three kiln schedules. Wood dried to this lower moisture content is used in interior applications or exported. During drying, a sample of the kiln exhaust was analyzed for total VOCs, and a sample of the kiln exhaust was collected and analyzed for hazardous air pollutants via gas chromatography and spectrophotometry. For all three kiln schedules, mills would reach 10 tons of methanol and thus must comply with maximum achievable control technology standards before reaching 25 tons of methanol, formaldehyde, acetaldehyde, acrolein, and propionaldehyde

Integrated care pathways for airway diseases (AIRWAYS-ICPs)

The objective of Integrated Care Pathways for Airway Diseases (AIRWAYS-ICPs) is to launch a collaboration to develop multi-sectoral care pathways for chronic respiratory diseases in European countries and regions. AIRWAYS-ICPs has strategic relevance to the European Union Health Strategy and will add value to existing public health knowledge by: 1) proposing a common framework of care pathways for chronic respiratory diseases, which will facilitate comparability and trans-national initiatives; 2) informing cost-effective policy development, strengthening in particular those on smoking and environmental exposure; 3) aiding risk stratification in chronic disease patients, using a common strategy; 4) having a significant impact on the health of citizens in the short term (reduction of morbidity, improvement of education in children and of work in adults) and in the long-term (healthy ageing); 5) proposing a common simulation tool to assist physicians; and 6) ultimately reducing the healthcare burden (emergency visits, avoidable hospitalisations, disability and costs) while improving quality of life. In the longer term, the incidence of disease may be reduced by innovative prevention strategies. AIRWAYSICPs was initiated by Area 5 of the Action Plan B3 of the European Innovation Partnership on Active and Healthy Ageing. All stakeholders are involved (health and social care, patients, and policy makers)