Study of metal recovery from printed circuit boards by physical-mechanical treatment processes

The acceleration of the global production and consumption of electronics device and the concerns related to waste electrical and electronic equipment (WEEE) motivated this research. Printed circuit board (PCB) can be found in almost all type of electronic devices, making it an important component of WEEE. It has a heterogenous composition made of polymers, ceramic material, and metals. It contains heavy metals that can cause environmental impacts due to improper disposal. But on the other hand, there are elements with added value, such as copper, gold, silver, iron, aluminum and critical raw materials, such tantalum that can be recovered, making PCB scrap an economically attractive for recycling. The metal recovery can conserve natural resources, since it prevents new minerals from being extracted and it is a great contribution to the circular economy, removing the waste from its disposal and reinserts in the production cycle. The mechanical recycling of PCBs was studied through different operations, with the following sequence, comminution, granulometric classification, magnetic separation, gravity separation and electrostatic separation. The goal is to concentrate metals, especially copper, identifying the main elements obtained through cheaper processes to recycle e-waste. The PCB composition was initially carried out through the scanning electron microscope analysis. Then, it was shredded in a cutting mill and classified according to their grain size by sieving. Afterwards, a magnetic separation has been performed together with gravity and electrostatic separation of the non-magnetic fraction. The products obtained were observed with the macroscope to qualitatively assess the metallic content. The results obtained allowed to conclude that physical-mechanical techniques have high potential to produce a concentrate product with high added value. The application of magnetic separation proved to be efficient, as it enabled the recovery of high percentage of iron. In gravity separation, the metal recovery was satisfactory for the particle size -0.6 + 0.3 mm and for the particle size -1.18 + 0.6mm. In the recovery of metals by electrostatic separation the efficiencies obtained was really high the lower particle size (-0.3mm)

Gestão conservacionista de solo e de água em escala de microbacia hidrográfica: estudo de caso.

bitstream/CNPT-2010/40705/1/p-do87.pd

Uso de tecnologias em lavouras de trigo tecnicamente assistidas no Paraná - safra 2012.

Registra e analisa informações sobre a triticultura paranaense correspondente à safra de 2012, assim como efetua diagnóstico acerca dos desafios para o avanço da cultura, no contexto dos sistemas de produção regionais.bitstream/item/103757/1/2014-documentos-online148.pd

Uso de tecnologias em lavouras de trigo tecnicamente assistidas no Paraná - safra 2014.

bitstream/item/147667/1/ID43753-2016DO160.pd

Kinin B(1) receptor deficiency leads to leptin hypersensitivity and resistance to obesity

OBJECTIVE-Kinins mediate pathophysiological processes related to hypertension, pain, and inflammation through the activation of two G-protein-coupled receptors, named B(1) and B(2). Although these peptides have been related to glucose homeostasis, their effects on energy balance are still unknown.RESEARCH DESIGN and METHODS-Using genetic and pharmacological strategies to abrogate the kinin B(1) receptor in different animal models of obesity, here we present evidence of a novel role for kinins in the regulation of satiety and adiposity.RESULTS-Kinin B(1) receptor deficiency in mice (B(1)(-/-)) resulted in less fat content, hypoleptinemia, increased leptin sensitivity, and robust protection against high-fat diet-induced weight gain. Under high-fat diet, B(1)(-/-) also exhibited reduced food intake, improved lipid oxidation, and increased energy expenditure. Surprisingly, B(1) receptor deficiency was not able to decrease food intake and adiposity in obese mice lacking leptin (ob/ob-B(1)(-/-)). However, ob/ob-B(1)(-/-) mice were more responsive to the effects of exogenous leptin on body weight and food intake, suggesting that B(1) receptors may be dependent on leptin to display their metabolic roles. Finally, inhibition of weight gain and food intake by B(1) receptor ablation was pharmacologically confirmed by long-term administration of the kinin B(1) receptor antagonist SSR240612 to mice under high-fat diet.CONCLUSIONS-Our data suggest that kinin B(1) receptors participate in the regulation of the energy balance via a mechanism that could involve the modulation of leptin sensitivity.Universidade Federal de São Paulo, Dept Biophys, BR-04023062 São Paulo, BrazilUniv Mogi das Cruzes, Mogi Das Cruzes, BrazilUniversidade Federal de São Paulo, Dept Physiol, BR-04023062 São Paulo, BrazilSanofi Aventis, Montpellier, FranceUniversidade Federal de São Paulo, Dept Med, BR-04023062 São Paulo, BrazilInst Natl Sante & Rech Med, Dept Renal & Cardiac Remodeling, U858 I2MR, Toulouse, FranceUniv Toulouse 3, Inst Med Mol Rangueil, F-31062 Toulouse, FranceInst Natl Rech Agron AgroParisTech, UMR914 Nutr Physiol & Ingest Behav, Paris, FranceMax Delbruck Ctr Mol Med, Berlin, GermanyUniversidade Federal de São Paulo, Dept Biophys, BR-04023062 São Paulo, BrazilUniversidade Federal de São Paulo, Dept Physiol, BR-04023062 São Paulo, BrazilUniversidade Federal de São Paulo, Dept Med, BR-04023062 São Paulo, BrazilWeb of Scienc

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Search for chargino-neutralino production with mass splittings near the electroweak scale in three-lepton final states in √s=13 TeV pp collisions with the ATLAS detector

A search for supersymmetry through the pair production of electroweakinos with mass splittings near the electroweak scale and decaying via on-shell W and Z bosons is presented for a three-lepton final state. The analyzed proton-proton collision data taken at a center-of-mass energy of √s=13  TeV were collected between 2015 and 2018 by the ATLAS experiment at the Large Hadron Collider, corresponding to an integrated luminosity of 139  fb−1. A search, emulating the recursive jigsaw reconstruction technique with easily reproducible laboratory-frame variables, is performed. The two excesses observed in the 2015–2016 data recursive jigsaw analysis in the low-mass three-lepton phase space are reproduced. Results with the full data set are in agreement with the Standard Model expectations. They are interpreted to set exclusion limits at the 95% confidence level on simplified models of chargino-neutralino pair production for masses up to 345 GeV

TRY plant trait database - enhanced coverage and open access

Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives