The removal and recovery of toxic and valuable metals from aqueous solutions by the yeast Saccharomyces cerevisiae

This project considered the use of the yeast Saccharomyces cerevisiae as a biosorbent for the removal and recovery of a range of metals from contaminated waters. S. cerevisiae, as a biosorbent, has the potential to provide a cost effective, selective and highly efficient purification system. Initial studies focused on metal accumulation by an immobilized baker's S. cerevisiae biosorbent. The parameters affecting metal uptake were investigated, these included metal concentration, time and solution pH. Metal uptake was rapid. Gold and cobalt reached saturation within 5 min of contact with the biosorbent in batch reactors. Copper, zinc, nickel, cadmium and chromium reached saturation within 30 min of contact. Metal accumulation was pH dependent and was generally unaffected at a solution pH ≥ 4, and was substantially decreased at pH ≤ 2. The exception was gold which was preferentially accumulated at a solution pH of 2. The immobilized baker's yeast accumulated metals with maximum binding capacities in the order of gold > cadmium > cobalt > zinc > copper > chromium > nickel. A rapid method to assess metal recovery was developed. Bioaccumulated metal was efficiently recovered using dilute mineral acids. Copper recovery of ≥ 80 % was achieved by decreasing the solution pH of the reaction mixture to 2 with the addition of nominal quantities of HCl, H₂SO₄ or RNO₃. Adsorption-desorption over 8 cycles had no apparent adverse effect on metal uptake or recovery in batch reactors. Transmission electron microscopy showed no evidence of damage to cells used in copper adsorption-desorption investigations. Biosorption columns were investigated as bioreactors due to their application potential. The metals investigated were effectively removed from solution. At a saturation threshold, metal uptake declined rapidly. Most metals investigated were desorbed from the columns by eluting with 0.1 M HCl. Initially recoveries of copper, cobalt and cadmium were as high as 100%. Desorbed copper, zinc, cadmium, nickel and cobalt were concentrated in 10 to 15 ml of eluent, representing up to a 40 fold decrease in solution volume. Cadmium, nickel and zinc uptake increased with the second application to the columns. Initial accumulation of gold and chromium was 42.2 μmol/g and 28.6 μmol/g, however, due to the low recoveries of these two metals, a second application was not investigated. Copper was applied to a single column for 8 consecutive adsorption-desorption cycles. Uptake increased from an initial 31.3 μmol/g to 47.8 μmol/g at cycle 7. The potential for selective metal recovery was demonstrated using two biosorption columns in series. Copper was accumulated and recovered most efficiently. Zinc, cobalt and cadmium were displaced to the second column. Copper bound preferentially to zinc at a ratio of 6:1. Copper bound preferentially to cobalt at a ratio of 4:1. Cadmium was only displaced at a ratio of 2:1. The successful transfer of the bioremediation technology from the laboratory to an industrial application has yet to be realized. Bioremediation of a Plaatjiesvlei Black Mountain mine effluent, which contained copper, zinc, lead and iron, was investigated in this project. The removal of the metals was most effective at pH 4. A combined strategy of pH adjustment and bioremediation using immobilized S. cerevisiae decreased the copper concentration by 92.5%, lead was decreased by 90% and zinc was decreased by 60%. Iron was mostly precipitated from solution at pH ≥ 4. An ageing pond at the mine with conditions such as; pH, water volume and metal concentration, which were more conducive to biological treatment was subsequently identified. The investigation indicated a possible application of the biomass as a supplement to chemical remediation. The metal removal capability of a waste brewer's yeast was subsequently investigated. A yeast conditioning step increased metal uptake up to 100% and enhanced reproducibility. Metal removal from solution was rapid and pH dependent. The metals were efficiently removed from solution at pH ≥ 4. Uptake was substantially inhibited at pH ≤ 3. The waste brewer's yeast accumulated metals with maximum binding capacities in the order of copper (25.4 μmol/g) > lead (19.4 μmol/g) > iron (15.6 μmol/g) > zinc (12.5 μmol/g). No correlation between cell physiology and metal uptake was observed. Uptake of the four metals was confirmed by energy dispersive X-ray microanalysis. The interference of lead, zinc and iron on copper uptake by the waste brewer's yeast, and the interference of copper on the uptake of lead, zinc and iron was investigated. Maximum copper uptake was not decreased in the presence of lead. The Bmax remained constant at approximately 25 μmol/g. The dissociation constants increased with increasing lead concentrations. Lead bioaccumulation was significantly decreased in the presence of copper. The type of inhibition was dependent on the initial copper concentrations. Zinc had a slight synergistic effect on copper uptake. The copper Bmax increased from 30.8 μmol/g in a single-ion system to 34.5 μmol/g in the presence of 200 μmol/l of zinc. Zinc uptake was severely inhibited in the presence of copper. The maximum uptake and dissociation constant values were decreased in the presence of copper, which suggested an uncompetitive inhibition. The affinity of copper was substantially higher than zinc. The presence of higher levels of copper than zinc in the yeast cells was confirmed by energy dispersive microanalysis. Copper uptake was decreased in the presence of iron, with the copper Bmax being decreased from 25.4 μmol/g in a single-ion system to 20.1 μmol/g in the presence of 200 μmol/l iron. Iron Bmax values remained constant at 16.0 μmol/g. Combined biosorption and EDXA results suggested the iron bound at a higher affinity than copper to the cell wall. Total copper removal was higher as larger quantities of copper were deposited in the cell cytoplasm. Metal removal from the Plaatjiesvlei effluent by free cell suspensions of the waste brewer's yeast was satisfactory. Copper levels were decreased by 96%, iron by 42%, lead 25% and zinc 2%. Waste brewer's yeast is a cheap source of biomass in South Africa, and could potentially provide the basis for the development of an innovative purification system for metal-contaminated waters

Evaluating Feruloyl Esterase—Xylanase Synergism for Hydroxycinnamic Acid and Xylo-Oligosaccharide Production from Untreated, Hydrothermally Pre-Treated and Dilute-Acid Pre-Treated Corn Cobs:

Agricultural residues are considered the most promising option as a renewable feedstock for biofuel and high valued-added chemical production due to their availability and low cost. The efficient enzymatic hydrolysis of agricultural residues into value-added products such as sugars and hydroxycinnamic acids is a challenge because of the recalcitrant properties of the native biomass. Development of synergistic enzyme cocktails is required to overcome biomass residue recalcitrance, and achieve high yields of potential value-added products. In this study, the synergistic action of two termite metagenome-derived feruloyl esterases (FAE5 and FAE6), and an endo-xylanase (Xyn11) from Thermomyces lanuginosus, was optimized using 0.5% (w/v) insoluble wheat arabinoxylan (a model substrate) and then applied to 1% (w/v) corn cobs for the efficient production of xylo-oligosaccharides (XOS) and hydroxycinnamic acids

Microbial monitoring of surface water in South Africa: an overview

Infrastructural problems force South African households to supplement their drinking water consumption from water resources of inadequate microbial quality. Microbial water quality monitoring is currently based on the Colilert®18 system which leads to rapidly available results. Using Escherichia coli as the indicator microorganism limits the influence of environmental sources on the reported results. The current system allows for understanding of long-term trends of microbial surface water quality and the related public health risks. However, rates of false positive for the Colilert®18-derived concentrations have been reported to range from 7.4% to 36.4%. At the same time, rates of false negative results vary from 3.5% to 12.5%; and the Colilert medium has been reported to provide for cultivation of only 56.8% of relevant strains. Identification of unknown sources of faecal contamination is not currently feasible. Based on literature review, calibration of the antibiotic-resistance spectra of Escherichia coli or the bifidobacterial tracking ratio should be investigated locally for potential implementation into the existing monitoring system. The current system could be too costly to implement in certain areas of South Africa where the modified H2S strip test might be used as a surrogate for the Colilert®18

Sorption of hydrophobic organic compounds on natural sorbents and organoclays from aqueous and non-aqueous solutions: a mini-review

Renewed focus on the sorption of hydrophobic organic chemicals (HOCs) onto mineral surfaces and soil components is required due to the increased and wider range of organic pollutants being released into the environment. This mini-review examines the possibility of the contribution and mechanism of HOC sorption onto clay mineral sorbents such as kaolinite, and soil organic matter and the possible role of both in the prevention of environmental contamination by HOCs. Literature data indicates that certain siloxane surfaces can be hydrophobic. Therefore soils can retain HOCs even at low soil organic levels and the extent will depend on the structure of the pollutant and the type and concentration of clay minerals in the sorbent. Clay minerals are wettable by nonpolar solvents and so sorption of HOCs onto them from aqueous and non-aqueous solutions is possible. This is important for two reasons: firstly, the movement and remediation of soil environments will be a function of the concentration and type of clay minerals in the soil. Secondly, low-cost sorbents such as kaolinite and expandable clays can be added to soils or contaminated environments as temporary retention barriers for HOCs. Inorganic cations sorbed onto the kaolinite have a strong influence on the rate and extent of sorption of hydrophobic organic pollutants onto kaolinite. Structural sorbate classes that can be retained by the kaolinite matrix are limited by hydrogen bonding between hydroxyl groups of the octahedral alumosilicate sheet and the tetrahedral sheet with silicon. Soil organic carbon plays a key role in the sorption of HOCs onto soils, but the extent will be strongly affected by the structure of the organic soil matter and the presence of soot. Structural characterisation of soil organic matter in a particular soil should be conducted during a particular contamination event. Contamination by mining extractants and antibiotics will require renewed focus on the use of the QSAR approaches in the context of the sorption of HOCs onto clay minerals from aqueous and non-aqueous solutions

Metabarcoding Analysis of Bacterial Communities Associated with Media Grow Bed Zones in an Aquaponic System

The development of environmentally sustainable plant and fish production in aquaponic systems requires a complete understanding of the systems’ biological components. In order to better understand the role of microorganisms in this association, we studied the bacterial communities in the dry, root, and mineralized zones of a flood-and-drain media bed aquaponic system. Bacterial communities were characterized using metabarcoding of the V3-V4 16S rRNA regions obtained from paired-end Illumina MiSeq reads. Proteobacteria, Actinobacteria, and Bacteroidetes accounted for more than 90% of the total community in the dry zone and the effluent water. These phyla also accounted for more than 68% of the total community in the root and mineralized zones. The genera Massilia, Mucilaginibacter, Mizugakiibacter, and Rhodoluna were most dominant in the dry, root, and mineralized zones and in the effluent water, respectively. The number of shared operational taxonomic units (OTUs) for the three zones was 241, representing 7.15% of the total observed OTUs. The number of unique OTUs in samples from dry zone, root zone, mineralized zone, and effluent water was 485, 638, 445, and 383, respectively. The samples from the root zone harbored more diverse communities than either the dry or mineralized zones. This study is the first to report on the bacterial community within the zones of a flood-and-drain media bed. Thus, this information will potentially accelerate studies on other microbial communities involved in the bioconversion of nitrogen compounds and mineralization within these types of aquaponic systems

Metabarcoding Analysis of Bacterial Communities Associated with Media Grow Bed Zones in an Aquaponic System

The development of environmentally sustainable plant and fish production in aquaponic systems requires a complete understanding of the systems’ biological components. In order to better understand the role of microorganisms in this association, we studied the bacterial communities in the dry, root, and mineralized zones of a flood-and-drain media bed aquaponic system. Bacterial communities were characterized using metabarcoding of the V3-V4 16S rRNA regions obtained from paired-end Illumina MiSeq reads. Proteobacteria, Actinobacteria, and Bacteroidetes accounted for more than 90% of the total community in the dry zone and the effluent water. These phyla also accounted for more than 68% of the total community in the root and mineralized zones. The genera Massilia, Mucilaginibacter, Mizugakiibacter, and Rhodoluna were most dominant in the dry, root, and mineralized zones and in the effluent water, respectively. The number of shared operational taxonomic units (OTUs) for the three zones was 241, representing 7.15% of the total observed OTUs. The number of unique OTUs in samples from dry zone, root zone, mineralized zone, and effluent water was 485, 638, 445, and 383, respectively. The samples from the root zone harbored more diverse communities than either the dry or mineralized zones. This study is the first to report on the bacterial community within the zones of a flood-and-drain media bed. Thus, this information will potentially accelerate studies on other microbial communities involved in the bioconversion of nitrogen compounds and mineralization within these types of aquaponic systems

Determination of Phylloplane Associated Bacteria of Lettuce from a Small-Scale Aquaponic System via 16S rRNA Gene Amplicon Sequence Analysis

Fresh vegetables harbour diverse bacterial populations on their surfaces which are important for plant health and growth. Information on epiphytic bacteria is limited to only a few types of vegetables and it is unknown how the lettuce epiphytic bacterial community structure may respond when a probiotic product is added to an aquaponic system. In this study, we evaluated lettuce growth and analysed epiphytic bacterial communities of lettuce based on metabarcoding analysis of the V3-V4 region of the 16S rRNA gene obtained from paired-end Illumina MiSeq reads. The addition of Bacillus probiotics resulted in a significant increase of nitrate and phosphate in the deep-water culture solution, as well as increased vegetative growth of lettuce. Metabarcoding analysis revealed that the most abundant phyla on lettuce leaf surfaces were Proteobacteria, Bacteroidetes, Firmicutes, and Actinobacteria. The in-depth bacterial composition analysis indicated that genera Chryseobacterium, Bacillus, Pantoea, Pseudoduganella, Flavobacterium, Paludibacter, and Cloacibacterium were dominant in leaf samples obtained from Bacillus-treated systems. Analysis of lettuce epiphytic bacterial communities of the fresh lettuce leaf surfaces also indicated the presence of food-borne pathogens belonging to the Shigella and Aeromonas genera, which were less abundant in the probiotic treated systems. This study provides the first characterization of the epiphytic bacterial community structure and how it can be modulated by the addition of a probiotic mixture to the nutrient solution of aquaponic systems

Forensic entomotoxicology revisited: towards professional standardisation of study designs

Forensic entomotoxicology is the use of insects as evidence of whether a toxicant is present in an environment such as a corpse, river or landscape. The earliest overtly forensic study was published in 1977, and since then, at least 63 papers have been published, most of them focused on the detection of toxicants in insects or on effects of toxicants on diverse insect indicator taxa. A comprehensive review of the published literature revealed various inconsistencies between studies that could be addressed by introducing standard protocols for such studies. These protocols could include selecting widespread and common model organisms (such as Lucilia sericata, Calliphora vicina, Chrysomya megacephala and Dermestes maculatus) and model toxicants (e.g. morphine and amitriptyline) to build up comparative databases; developing a standard matrix for use as a feeding substrate; setting guidelines for statistically adequate sample sizes; and deploying more sophisticated analytical methods from the general field of toxicology

Use of a non-hepatic cell line highlights limitations associated with cell-based assessment of metabolically induced toxicity:

Metabolically induced drug-toxicity is a major cause of drug failure late in drug optimization phases. Accordingly, in vitro metabolic profiling of compounds is being introduced at earlier stages of the drug discovery pipeline. An increasingly common method to obtain these profiles is through overexpression of key CYP450 metabolic enzymes in immortalized liver cells, to generate competent hepatocyte surrogates. Enhanced cytotoxicity is presumed to be due to toxic metabolite production via the overexpressed enzyme. However, metabolically induced toxicity is a complex multi-parameter phenomenon and the potential background contribution to metabolism arising from the use of liver cells which endogenously express CYP450 isoforms is consistently overlooked. In this study, we sought to reduce the potential background interference by applying this methodology in kidney-derived HEK293 cells which lack endogenous CYP450 expression