Synthesis of Gamma-Alumina from Kankara Kaolin as Potential Zeolite Active Matrix

Commercial fluid catalytic cracking catalysts are manufactured using zeolites dispersed on an amorphous matrix, which is mostly alumina. Alumina is widely used as catalyst support in many heterogeneous catalytic processes owing to its high surface area, superior chemical activity and low cost. In compounded zeolite catalyst it serves as the active matrix which aids the conversion of the bulkiest molecules in the feed owing to its larger pore size than zeolite. Large specific surface area gamma-alumina (γ-Al2O3) was synthesized by hydrothermal method using Kankara kaolin as starting material. Thermal treatment of ammonium alum prepared from the filtrate of the dealuminated metakaolin was employed to obtain the alumina. Crystalline aluminum sulfate with 39 wt% Al2O3 was obtained at calcination temperature of 800°C with 3 h soaking. Gamma-alumina was produced at 850°C with 3 h soaking time, having specific surface area of 166 m2/g. The weight percent of Al2O3 content in the synthesized and commercial gamma-alumina were 85% and 89% respectively as obtained from the XRF analysis. Good comparison was also observed in the diffractogram of the synthesized and commercial gamma-alumina from the XRD analysis. The Scanning Electron Microscopy (SEM) image showed the platy hexagonal shape of the gamma-alumina.Keywords: Gamma-alumina, zeolite, kaoli

Preparation of High Grade Silica from Rice Husk for Zeolite Synthesis

Silica powder with approximately 96% purity was extracted from rice husk (RH) and used as a silica source for the synthesis of zeolite Y by hydrothermal process. The effect of synthesis parameters such as pH, temperature of burning the rice husk, acid leaching prior to formation of rice husk ash (RHA) on the properties of final product were studied. The acid-leached rice husk calcined at 650 °C for 6 h produced rough powder of rice husk silica, light brown in colour. The silica purity of the rice husk ash (RHA) calcined at 400, 450 and 5000C were 95.6wt%, 96.1wt% and 95.89 wt% respectively. The X-Ray Diffraction (XRD) pattern of the silica obtained show that the silica was amorphous with traces of crystalline phase. The amorphous nature of the RHA and the relatively high purity of silica content in it make it a suitable source of silica for zeolite synthesis.Keywords: Silica; RHA; Zeolite; Synthesis; Hydrothermal; Temperatur

Comparative Production of Bio-Oil from In Situ Catalytic Upgrading of Fast Pyrolysis of Lignocellulosic Biomass

Catalytic upgrading of fast pyrolysis bio-oil from two different types of lignocellulosic biomass was conducted using an H-ZSM-5 catalyst at different temperatures. A fixed-bed pyrolysis reactor has been used to perform in situ catalytic pyrolysis experiments at temperatures of 673, 773, and 873 K, where the catalyst (H-ZSM-5) has been mixed with wood chips or lignin, and the pyrolysis and upgrading processes have been performed simultaneously. The fractionation method has been employed to determine the chemical composition of bio-oil samples after catalytic pyrolysis experiments by gas chromatography with mass spectroscopy (GCMS). Other characterization techniques, e.g., water content, viscosity, elemental analysis, pH, and bomb calorimetry have been used, and the obtained results have been compared with the non-catalytic pyrolysis method. The highest bio-oil yield has been reported for bio-oil obtained from softwood at 873 K for both non-catalytic and catalytic bio-oil samples. The results indicate that the main effect of H-ZSM-5 has been observed on the amount of water and oxygen for all bio-oil samples at three different temperatures, where a significant reduction has been achieved compared to non-catalytic bio-oil samples. In addition, a significant viscosity reduction has been reported compared to non-catalytic bio-oil samples, and less viscous bio-oil samples have been produced by catalytic pyrolysis. Furthermore, the obtained results show that the heating values have been increased for upgraded bio-oil samples compared to non-catalytic bio-oil samples. The GCMS analysis of the catalytic bio-oil samples (H-ZSM-5) indicates that toluene and methanol have shown very similar behavior in extracting bio-oil samples in contrast to non-catalytic experiments. However, methanol performed better for extracting chemicals at a higher temperature

Charged Higgs Boson Production in Bottom-Gluon Fusion

We compute the complete next-to-leading order SUSY-QCD corrections for the associated production of a charged Higgs boson with a top quark via bottom-gluon fusion. We investigate the applicability of the bottom parton description in detail. The higher order corrections can be split into real and virtual corrections for a general two Higgs doublet model and into additional massive supersymmetric loop contributions. We find that the perturbative behavior is well under control. The supersymmetric contributions consist of the universal bottom Yukawa coupling corrections and non-factorizable diagrams. Over most of the relevant supersymmetric parameter space the Yukawa coupling corrections are sizeable, while the remaining supersymmetric loop contributions are negligible.Comment: 18 pages, v2: some discussions added, v3: published versio

The performance of the jet trigger for the ATLAS detector during 2011 data taking

The performance of the jet trigger for the ATLAS detector at the LHC during the 2011 data taking period is described. During 2011 the LHC provided proton–proton collisions with a centre-of-mass energy of 7 TeV and heavy ion collisions with a 2.76 TeV per nucleon–nucleon collision energy. The ATLAS trigger is a three level system designed to reduce the rate of events from the 40 MHz nominal maximum bunch crossing rate to the approximate 400 Hz which can be written to offline storage. The ATLAS jet trigger is the primary means for the online selection of events containing jets. Events are accepted by the trigger if they contain one or more jets above some transverse energy threshold. During 2011 data taking the jet trigger was fully efficient for jets with transverse energy above 25 GeV for triggers seeded randomly at Level 1. For triggers which require a jet to be identified at each of the three trigger levels, full efficiency is reached for offline jets with transverse energy above 60 GeV. Jets reconstructed in the final trigger level and corresponding to offline jets with transverse energy greater than 60 GeV, are reconstructed with a resolution in transverse energy with respect to offline jets, of better than 4 % in the central region and better than 2.5 % in the forward direction

Search for long-lived neutral particles in pp collisions at s√=13 TeV that decay into displaced hadronic jets in the ATLAS calorimeter

This paper describes a search for pairs of neutral, long-lived particles decaying in the ATLAS calorimeter. Long-lived particles occur in many extensions to the Standard Model and may elude searches for new promptly decaying particles. The analysis considers neutral, long-lived scalars with masses between 5 and 400 GeV, produced from decays of heavy bosons with masses between 125 and 1000 GeV, where the long-lived scalars decay into Standard Model fermions. The analysis uses either 10.8 fb−1 or 33.0 fb−1 of data (depending on the trigger) recorded in 2016 at the LHC with the ATLAS detector in proton–proton collisions at a centre-of-mass energy of 13 TeV. No significant excess is observed, and limits are reported on the production cross section times branching ratio as a function of the proper decay length of the long-lived particles

REMARKS ON OPTIMIZED PREDICTIONS FOR THE DRELL-YAN PROCESS

AURENCHE P, Baier R, FONTANNAZ M. REMARKS ON OPTIMIZED PREDICTIONS FOR THE DRELL-YAN PROCESS. ZEITSCHRIFT FUR PHYSIK C-PARTICLES AND FIELDS. 1990;48(1):143-146

Biologia reprodutiva de Psychotria spectabilis Steyrm. e Palicourea cf. virens (Poepp & Endl.) Standl. (Rubiaceae) em uma floresta tropical úmida na região de Manaus, AM, Brasil Reproductive biology of Psychotria spectabilis Steyrm. and Palicourea cf. virens (Poepp. & Endl.) Standl. (Rubiaceae) in a moist tropical forest at Manaus, Amazonas State, Brazil

Este estudo descreve a fenologia reprodutiva, morfologia e biologia floral, polinização e sucesso reprodutivo de Psychotria spectabilis e Palicourea cf. virens. Psychotria spectabilis floresceu de setembro a dezembro enquanto Palicourea cf. virens floresceu de maio a outubro. As inflorescências de Psychotria spectabilis são inflorescências terminais do tipo capítulo, com brácteas amarelas, flores brancas e heterostilia associada a diferenças na papila estigmática. Palicourea cf. virens apresenta inflorescências terminais do tipo corimbo, com flores amarelas homostílicas. Os recursos florais oferecidos foram néctar e pólen em ambas as espécies. Os beija-flores Phaethornis bourcieri e o macho de Thalurania furcata foram os principais visitantes florais de Psychotria spectabilis. Palicourea cf. virens também foi visitada por Thalurania furcata, com maior freqüência de visitas pela fêmea desta espécie. A abelha Trigona fulviventris visitou as flores das duas espécies, mas se comportou como pilhadora. O sucesso reprodutivo pré-emergente (SRPE) das duas espécies foi baixo, embora tenham apresentado um alto potencial reprodutivo.<br>This study describes the reproductive phenology, floral biology, pollination and reproductive success of Psychotria spectabilis and Palicourea cf. virens. Psychotria spectabilis flowered from September to December while P. cf. virens flowered from May to October. The terminal inflorescence of Psychotria spectabilis is of the capitate type with yellow bracts, white flowers and heterostyly associated with differences of stigmatic papillae. The terminal inflorescence of Palicourea cf. virens is a corymb with yellow, homostylous flowers. Flower resources include nectar and pollen for both species. The hummingbirds Phaethornis bourcieri and the male of Thalurania furcata were the main floral visitors of Psychotria spectabilis. Palicourea cf. virens was also visited by T. furcata, but the female was the main visitor. Trigona fulviventris visited flowers of both species, but was considered a thief. Pre-emergent reproductive success (PERS) of these two species was low, although they showed high reproductive potential