14 research outputs found

    Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

    Measurement of the W boson polarisation in ttˉt\bar{t} events from pp collisions at s\sqrt{s} = 8 TeV in the lepton + jets channel with ATLAS

    Get PDF

    Measurement of jet fragmentation in Pb+Pb and pppp collisions at sNN=2.76\sqrt{{s_\mathrm{NN}}} = 2.76 TeV with the ATLAS detector at the LHC

    Get PDF

    Search for new phenomena in events containing a same-flavour opposite-sign dilepton pair, jets, and large missing transverse momentum in s=\sqrt{s}= 13 pppp collisions with the ATLAS detector

    Get PDF

    Video bioinformatics analysis of human pluripotent stem cell morphology, quality, and cellular dynamics.

    No full text
    StemCellQC is a video bioinformatics software tool for the quantitative analysis of human pluripotent stem cell (hPSC) colonies. Our objective was to use StemCellQC to evaluate and compare various experimental culture conditions, cell lines, and treatments and to demonstrate its applicability to PSC problems. Seven key features were identified that provided useful information on PSC morphology, dynamic behavior, and viability. Colony attachment was better on laminin-521 than on Matrigel and Geltrex. Growth rates were similar on each matrix when data were normalized. The brightness/area ratio feature showed greater cell death in colonies grown on Matrigel and Geltrex than on laminin-521 further contributing to an overall greater yield of cells on laminin-521. Four different PSC culture media performed similarly; however, one medium produced batch-to-batch variation in colony morphology and dynamic features. Two embryonic and one induced pluripotent stem cell line showed significant differences in morphology, growth rates, motility, and death rates. Cells from the same vial that became phenotypically different in culture showed measurable differences in morphology, brightness, and motility. Likewise, differentiating and undifferentiated colonies varied in growth rate, intensity, and motility. Three pluripotent cell lines treated with a low concentration of cinnamaldehyde, a chemical used in consumer products, showed adverse effects and differed in their sensitivity to treatment. Our data demonstrate various applications of StemCellQC which could be used in basic and translational research, toxicological and drug testing, and clinical facilities engaged in stem cell therapy

    Factors Associated With Hospitalization Among Breast Cancer Patients With COVID-19: A Diverse Multi-Center Los Angeles Cohort Study

    No full text
    BackgroundThe SARS-CoV-2 virus has infected and killed millions of people worldwide. Breast cancer is the most prevalent cancer in women and few studies have investigated the outcomes of patients with a history of breast cancer and COVID-19. We report the clinical outcomes of patients with invasive breast cancer who tested positive for SARS-CoV-2, including hospitalization and death, and evaluate demographic and cancer-related factors associated with these outcomes.PatientsPatients with a history of invasive breast cancer and positive SARS-CoV-2 test from January 1 to December 31, 2020 at two large, academic Los Angeles health systems were included.MethodsRetrospective chart review of the electronic medical record was performed. Data for demographic and cancer-related factors were manually abstracted. Relationships between outcomes and clinical variables were evaluated using Fisher's exact test and linear regression analysis.ResultsAmong a total of 132 patients, 40 (30.3%) were hospitalized, while 11 (8.3%) required intensive care support, and 8 patients (6.1%) died. Older age and presence of one or more additional comorbidities were associated with hospitalization and death (P = .010, P = .003, P = .034, P < .001). Hispanic/Latinx ethnicity was associated with hospitalization (P = .047). Cancer treatment was not associated with hospitalization or death.ConclusionIn our diverse, multi-center, breast cancer cohort, Hispanic/Latinx ethnicity, older age and presence of other comorbidities were associated with worse outcomes from COVID-19. Breast cancer treatment, including surgery, radiation, systemic therapy, and endocrine therapy, was not associated with hospitalization in our cohort. Further studies are needed to explore the relationship between breast cancer and COVID-19 outcomes

    Search for direct top squark pair production in final states with two leptons in s=13\sqrt{s} = 13 TeV pppp collisions with the ATLAS detector

    No full text
    International audienceThe results of a search for direct pair production of top squarks in events with two opposite-charge leptons (electrons or muons) are reported, using 36.1 fb136.1~\hbox {fb}^{-1} of integrated luminosity from proton–proton collisions at s=13\sqrt{s}=13 TeV collected by the ATLAS detector at the Large Hadron Collider. To cover a range of mass differences between the top squark t~\tilde{t} and lighter supersymmetric particles, four possible decay modes of the top squark are targeted with dedicated selections: the decay t~bχ~1±\tilde{t} \rightarrow b \tilde{\chi }_{1}^{\pm } into a b-quark and the lightest chargino with χ~1±Wχ~10\tilde{\chi }_{1}^{\pm } \rightarrow W \tilde{\chi }_{1}^{0} , the decay t~tχ~10\tilde{t} \rightarrow t \tilde{\chi }_{1}^{0} into an on-shell top quark and the lightest neutralino, the three-body decay t~bWχ~10\tilde{t} \rightarrow b W \tilde{\chi }_{1}^{0} and the four-body decay t~bνχ~10\tilde{t} \rightarrow b \ell \nu \tilde{\chi }_{1}^{0} . No significant excess of events is observed above the Standard Model background for any selection, and limits on top squarks are set as a function of the t~\tilde{t} and χ~10\tilde{\chi }_{1}^{0} masses. The results exclude at 95% confidence level t~\tilde{t} masses up to about 720 GeV, extending the exclusion region of supersymmetric parameter space covered by previous searches

    Measurements of ttˉt\bar{t} differential cross-sections of highly boosted top quarks decaying to all-hadronic final states in pppp collisions at s=13\sqrt{s}=13\, TeV using the ATLAS detector

    No full text
    Measurements are made of differential cross-sections of highly boosted pair-produced top quarks as a function of top-quark and ttˉt\bar{t} system kinematic observables using proton--proton collisions at a center-of-mass energy of s=13\sqrt{s} = 13 TeV. The data set corresponds to an integrated luminosity of 36.136.1 fb1^{-1}, recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Events with two large-radius jets in the final state, one with transverse momentum pT>500p_{\rm T} > 500 GeV and a second with pT>350p_{\rm T}>350 GeV, are used for the measurement. The top-quark candidates are separated from the multijet background using jet substructure information and association with a bb-tagged jet. The measured spectra are corrected for detector effects to a particle-level fiducial phase space and a parton-level limited phase space, and are compared to several Monte Carlo simulations by means of calculated χ2\chi^2 values. The cross-section for ttˉt\bar{t} production in the fiducial phase-space region is 292±7 (stat)±76(syst)292 \pm 7 \ \rm{(stat)} \pm 76 \rm{(syst)} fb, to be compared to the theoretical prediction of 384±36384 \pm 36 fb

    Study of the material of the ATLAS inner detector for Run 2 of the LHC

    No full text
    International audienceThe ATLAS inner detector comprises three different sub-detectors: the pixel detector, the silicon strip tracker, and the transition-radiation drift-tube tracker. The Insertable B-Layer, a new innermost pixel layer, was installed during the shutdown period in 2014, together with modifications to the layout of the cables and support structures of the existing pixel detector. The material in the inner detector is studied with several methods, using a low-luminosity √s=13 TeV pp collision sample corresponding to around 2.0 nb−1 collected in 2015 with the ATLAS experiment at the LHC. In this paper, the material within the innermost barrel region is studied using reconstructed hadronic interaction and photon conversion vertices. For the forward rapidity region, the material is probed by a measurement of the efficiency with which single tracks reconstructed from pixel detector hits alone can be extended with hits on the track in the strip layers. The results of these studies have been taken into account in an improved description of the material in the ATLAS inner detector simulation, resulting in a reduction in the uncertainties associated with the charged-particle reconstruction efficiency determined from simulation
    corecore