7,148 research outputs found
A passivity based control methodology for flexible joint robots with application to a simplified shuttle RMS arm
The main goal is to develop a general theory for the control of flexible robots, including flexible joint robots, flexible link robots, rigid bodies with flexible appendages, etc. As part of the validation, the theory is applied to the control law development for a test example which consists of a three-link arm modeled after the shoulder yaw joint of the space shuttle remote manipulator system (RMS). The performance of the closed loop control system is then compared with the performance of the existing RMS controller to demonstrate the effectiveness of the proposed approach. The theoretical foundation of this new approach to the control of flexible robots is presented and its efficacy is demonstrated through simulation results on the three-link test arm
Metaheuristic design of feedforward neural networks: a review of two decades of research
Over the past two decades, the feedforward neural network (FNN) optimization has been a key interest among the researchers and practitioners of multiple disciplines. The FNN optimization is often viewed from the various perspectives: the optimization of weights, network architecture, activation nodes, learning parameters, learning environment, etc. Researchers adopted such different viewpoints mainly to improve the FNN's generalization ability. The gradient-descent algorithm such as backpropagation has been widely applied to optimize the FNNs. Its success is evident from the FNN's application to numerous real-world problems. However, due to the limitations of the gradient-based optimization methods, the metaheuristic algorithms including the evolutionary algorithms, swarm intelligence, etc., are still being widely explored by the researchers aiming to obtain generalized FNN for a given problem. This article attempts to summarize a broad spectrum of FNN optimization methodologies including conventional and metaheuristic approaches. This article also tries to connect various research directions emerged out of the FNN optimization practices, such as evolving neural network (NN), cooperative coevolution NN, complex-valued NN, deep learning, extreme learning machine, quantum NN, etc. Additionally, it provides interesting research challenges for future research to cope-up with the present information processing era
Deformation Control in Rest-to-Rest Motion of Mechanisms with Flexible Links
This paper develops and validates experimentally a feedback strategy for the reduction of the link deformations in rest-to-rest motion of mechanisms with flexible links, named Delayed Reference Control (DRC). The technique takes advantage of the inertial coupling between rigid-bodymotion and elasticmotion to control the undesired link deformations by shifting in time the position reference through an action reference parameter. The action reference parameter is computed on the fly based on the sensed strains by solving analytically an optimization problem. An outer control loop is closed to compute the references for the position controllers of each actuator, which can be thought of as the inner control loop. The resulting multiloop architecture of the DRC is a relevant advantage over several traditional feedback controllers: DRC can be implemented by just adding an outer control loop to standard position controllers. A validation of the proposed control strategy is provided by applying the DRC to the real-time control of a four-bar linkage
Genetic algorithm optimization and control system design of flexible structures
This paper presents an investigation into the deployment of genetic algorithm (GA)-based controller design and optimization for vibration suppression in flexible structures. The potential of GA is explored in three case studies. In the first case study, the potential of GA is demonstrated in the development and optimization of a hybrid learning control scheme for vibration control of flexible manipulators. In the second case study, an active control mechanism for vibration suppression of flexible beam structures using GA optimization technique is proposed. The third case study presents the development of an effective adaptive command shaping control scheme for vibration control of a twin rotor system, where GA is employed to optimize the amplitudes and time locations of the impulses in the proposed control algorithm. The effectiveness of the proposed control schemes is verified in both an experimental and a simulation environment, and their performances are assessed in both the time and frequency domains
Benchmarking Cerebellar Control
Cerebellar models have long been advocated as viable models
for robot dynamics control. Building on an increasing insight
in and knowledge of the biological cerebellum, many models have been
greatly refined, of which some computational models have emerged
with useful properties with respect to robot dynamics control.
Looking at the application side, however, there is a totally different
picture. Not only is there not one robot on the market which uses
anything remotely connected with cerebellar control, but even in
research labs most testbeds for cerebellar models are restricted to
toy problems. Such applications hardly ever exceed the complexity of
a 2 DoF simulated robot arm; a task which is hardly representative for
the field of robotics, or relates to realistic applications.
In order to bring the amalgamation of the two fields forwards, we
advocate the use of a set of robotics benchmarks, on which existing
and new computational cerebellar models can be comparatively tested.
It is clear that the traditional approach to solve robotics dynamics
loses ground with the advancing complexity of robotic structures;
there is a desire for adaptive methods which can compete as traditional
control methods do for traditional robots.
In this paper we try to lay down the successes and problems in the
fields of cerebellar modelling as well as robot dynamics control.
By analyzing the common ground, a set of benchmarks is suggested
which may serve as typical robot applications for cerebellar models
- …