Effect of short-term bee bread on testicular cell development and testosterone level in male Sprague Dawley rats

Bee bread has been widely traditionally used for male fertility enrichment although limited scientific data are available on its effectiveness. Hence, the aim of this study was to determine the effect of bee bread on testicular cell development and testosterone level in male Sprague Dawley rats. In this study, 24 adult male Sprague-Dawley rats were selected and divided equally into four treatment groups (n = 6/group) which were Control (C: 0 g of bee bread/kg body weight), Treatment 1 (T1: 1 g of bee bread /kg body weight), Treatment 2 (T2: 2 g of bee bread /kg body weight) and Treatment 3 (T3: 3 g of bee bread /kg body weight). The bee bread was administered daily and orally according to the designated treatment groups using oral gavage for 28 days. After 28 days of treatment, rats were euthanised and testicular cell development and testosterone level were measured. Results showed that rats in the T2 group had thicker (P<0.05) seminiferous tubular diameter (STD) than the control group and higher (P<0.05) seminiferous epithelial height (SEH) compared to C and T1 groups. The testosterone level in the T1, T2 and T3 groups was significantly higher (P<0.05) compared to control. In conclusion, this study suggests that supplemented with 2 g of bee bread per kg body weight is likely to give a positive effect by improving testicular cells development and testosterone level in male Sprague Dawley rats

Composition and source identification of polycyclic aromatic hydrocarbons in mangrove sediments of Peninsular Malaysia : indication of anthropogenic input.

This is a comprehensive study of the composition, origin and sources of specific polycyclic aromatic hydrocarbons (PAHs) in sediments of mangrove estuary in the western part of Peninsular Malaysia. Mangrove sediments were analyzed for 17 PAHs by gas chromatography–mass spectrometry. Total PAH concentrations in the sediments ranged from 20 to 112 ng/g on a dry-weight basis. High molecular weight PAHs were abundant in the sediments. Parent PAH ratios revealed that pyrogenic input has important contribution to the sedimentary PAHs. Ratios of alkylated PAHs indicate that the sedimentary PAHs were influenced by petrogenic PAHs, which implies that petrogenic input has contribution to the sedimentary PAHs but that it is not a major factor in distribution of PAHs within the estuary. Combustion-derived PAHs show a positive and very strong correlation with total PAHs (R 2 = 0.926, p < 0.05). Total methylphenanthrenes show very weak correlation with total PAHs (R 2 = 0.0928, p < 0.05). The PAH concentrations were found to increase with distance from the upstream of the estuary to the coastal area of the Straits of Malacca. For the assessment of sediment contamination using biological thresholds, none of the individual studied PAH compounds exceeded the values of the effect range low–effect range median guideline and the threshold effects level–probable effects level guideline. This study demonstrates that the sediments of the mangrove ecosystem facing the Straits of Malacca and Sumatra are influenced by anthropogenic PAH inputs as a result of human activities such as biomass burning, vehicle emissions and boating activities

Mechanical and Electrical Ageing Effects on the Long-Term Stretching of Silicone Dielectric Elastomers with Soft Fillers:Long-Term Stretching of Silicone Dielectric Elastomers

Dielectric elastomer materials for actuators need to be soft and stretchable while possessing high dielectric permittivity. Soft silicone elastomers can be obtained through the use of silicone oils, while enhanced permittivity can be obtained through the use of dipolar groups on the polymer backbone. Such elastomers are prepared by adding soft fillers to a strong and relatively stiff elastomer, Elastosil LR3043/50. The long-term stability of the materials is tested by straining the elastomers 60% statically for up to 3 months. The results show that soft fillers significantly influence the long-term stability of silicone elastomers, with electrical breakdown strength being the most influenced. Especially high concentrations of silicone oils should be avoided for long-term mechanical stability

Honey and its nutritional and anti-inflammatory value

Inflammation is the main key role in developing chronic diseases including cancer, cardiovascular diseases, diabetes, arthritis, and neurodegenerative diseases which possess a huge challenge for treatment. With massively compelling evidence of the role played by nutritional modulation in preventing inflammation-related diseases, there is a growing interest into the search for natural functional foods with therapeutic and preventive actions. Honey, a nutritional healthy product, is produced mainly by two types of bees: honeybee and stingless bee. Since both types of honey possess distinctive phenolic and flavonoid compounds, there is recently an intensive interest in their biological and clinical actions against inflammation-mediated chronic diseases. This review shed the light specifically on the bioavailability and bioaccessibility of honey polyphenols and highlight their roles in targeting inflammatory pathways in gastrointestinal tract disorders, edema, cancer, metabolic and cardiovascular diseases and gut microbiota

Analysing the impact of rescheduling time in hybrid manufacturing control

Hybrid manufacturing control architectures merge the benefits of hierarchical and heterarchical approaches. Disturbances can be handled at upper or lower decision levels, depending on the type of disturbance, its impact and the time the control system has to react. This paper focuses particularly on a disturbance handling mechanism at upper decision levels using a rescheduling manufacturing method. Such rescheduling is more complex that the offline scheduling since the control system must take into account the current system status, obtain a satisfactory performance under the new conditions, and also come up with a new schedule in a restricted amount of time. Then, this paper proposes a simple and generic rescheduling method which, based on the satisfying principle, analyses the trade-off between the rescheduling time and the performance achieved after a perturbation. The proposed approach is validated on a simulation model of a realistic assembly cell and results demonstrate that adaptation of the rescheduling time might be beneficial in terms of overall performance and reactivity.info:eu-repo/semantics/publishedVersio

Who needs a gut anyway?

This is an up-to-date review on Chronic Intestinal Failure (CIF) and Parenteral Nutrition (PN) as a management strategy for CIF.CIF and long-term PN are important subjects, but are superficially covered in undergraduate curricula due to the perception that they are relatively specialist areas. PN, as well as being a form of acute nutritional support, is used as a life-sustaining measure for patients with CIF due to conditions such as bowel ischaemia and Crohn’s disease. Currently, around 500 patients receive long-term PN in the UK and the numbers are expected to rise with the aging population1. It is a costly service, requiring a multidisciplinary team effort, along with high frequency patient-healthcare interaction.This article aims to discuss the current evidence on the causes, management and prognosis of CIF, with a particular focus on PN as a form of nutritional management. While PN seems to improve the prognosis of patients with CIF from a medical point of view, we will also explore how it affects other aspects of a patient’s life, such as their social life and mental health.

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO

Azimuthal anisotropy of charged particles at high transverse momenta in PbPb collisions at sqrt(s[NN]) = 2.76 TeV

The azimuthal anisotropy of charged particles in PbPb collisions at nucleon-nucleon center-of-mass energy of 2.76 TeV is measured with the CMS detector at the LHC over an extended transverse momentum (pt) range up to approximately 60 GeV. The data cover both the low-pt region associated with hydrodynamic flow phenomena and the high-pt region where the anisotropies may reflect the path-length dependence of parton energy loss in the created medium. The anisotropy parameter (v2) of the particles is extracted by correlating charged tracks with respect to the event-plane reconstructed by using the energy deposited in forward-angle calorimeters. For the six bins of collision centrality studied, spanning the range of 0-60% most-central events, the observed v2 values are found to first increase with pt, reaching a maximum around pt = 3 GeV, and then to gradually decrease to almost zero, with the decline persisting up to at least pt = 40 GeV over the full centrality range measured.Comment: Replaced with published version. Added journal reference and DO