Influence of limestone addition on sodium sulphate activated blast furnace slag cements

The effect of limestone replacement in the reaction and phase assemblage evolution of two sodium sulfate activated slag cements was investigated. The slag composition and its reactivity influenced the reaction kinetics of these materials. Paste with limestone addition exhibited an acceleration in reaction kinetics, particularly for slowly reacting slags. Ettringite and an aluminium substituted calcium silicate hydrate were identified as main reaction products in these cements, independently of the slag type or limestone replacement level. No significant changes in phase assemblages were observed with limestone addition for over 365 days of testing; however, these composite cements exhibited an increased compressive strength, consistent with a refined pore structure. These results indicate that it is possible to partially replace slag by limestone in sulfate activated slag cements without changing the type of reaction products forming in these systems, while also increasing compressive strength and achieving a similar refined pore structure

A search for the decay B+→K+ννˉB^+ \to K^+ \nu \bar{\nu}

We search for the rare flavor-changing neutral-current decay $B^+ \to K^+ \nu \bar{\nu}$ in a data sample of 82 fb$^{-1}$ collected with the {\sl BABAR} detector at the PEP-II B-factory. Signal events are selected by examining the properties of the system recoiling against either a reconstructed hadronic or semileptonic charged-B decay. Using these two independent samples we obtain a combined limit of ${\mathcal B}(B^+ \to K^+ \nu \bar{\nu})<5.2 \times 10^{-5}$ at the 90% confidence level. In addition, by selecting for pions rather than kaons, we obtain a limit of ${\mathcal B}(B^+ \to \pi^+ \nu \bar{\nu})<1.0 \times 10^{-4}$ using only the hadronic B reconstruction method.Comment: 7 pages, 8 postscript figures, submitted to Phys. Rev. Let

High-reflectivity broadband distributed Bragg reflector lattice matched to ZnTe

We report on the realization of a high quality distributed Bragg reflector with both high and low refractive index layers lattice matched to ZnTe. Our structure is grown by molecular beam epitaxy and is based on binary compounds only. The high refractive index layer is made of ZnTe, while the low index material is made of a short period triple superlattice containing MgSe, MgTe, and ZnTe. The high refractive index step of Delta_n=0.5 in the structure results in a broad stopband and the reflectivity coefficient exceeding 99% for only 15 Bragg pairs.Comment: 4 pages, 3 figure

The Physics of the B Factories

This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C

EuFe2_2As2_2 under high pressure: an antiferromagnetic bulk superconductor

We report the ac magnetic susceptibility $\chi_{ac}$ and resistivity $\rho$ measurements of EuFe$_2$As$_2$ under high pressure $P$. By observing nearly 100% superconducting shielding and zero resistivity at $P$ = 28 kbar, we establish that $P$-induced superconductivity occurs at $T_c \sim$~30 K in EuFe$_2$As$_2$. $\rho$ shows an anomalous nearly linear temperature dependence from room temperature down to $T_c$ at the same $P$. $\chi_{ac}$ indicates that an antiferromagnetic order of Eu$^{2+}$ moments with $T_N \sim$~20 K persists in the superconducting phase. The temperature dependence of the upper critical field is also determined.Comment: To appear in J. Phys. Soc. Jpn., Vol. 78 No.

Improved measurement of CP asymmetries in B-0 ->(c(c)over-bar)K0((*)) decays

We present results on time-dependent CP asymmetries in neutral B decays to several CP eigenstates. The measurements use a data sample of about 227x10(6) Upsilon(4S)-> B (B) over bar decays collected by the BABAR detector at the PEP-II asymmetric-energy B Factory at SLAC. The amplitude of the CPasymmetry, sin2 beta in the standard model, is derived from decay-time distributions from events in which one neutral B meson is fully reconstructed in a final state containing a charmonium meson and the other B meson is determined to be either a B-0 or (0) from its decay products. We measure sin2 beta=0.722 +/- 0.040(stat)+/- 0.023(syst) in agreement with the standard model expectation

Dataset for 'Influence of limestone addition on sodium sulphate activated blast furnace slag cements'

The data contained in this workbook has been used to create the following figures in the journal article: Marsh, A.T., Yue, Z., Dhandapani, Y., Button, K., Adu-Amankwah, S. and Bernal, S.A., 2022. Influence of limestone addition on sodium sulphate activated blast furnace slag cements. Construction and Building Materials, 360, p.129527. https://doi.org/10.1016/j.conbuildmat.2022.12952