Two-phonon scattering of magnetorotons in fractional quantum Hall liquids

We study the phonon-assisted process of dissociation of a magnetoroton, in a fractional quantum Hall liquid, into an unbound pair of quasiparticles. Whilst the dissociation is forbidden to first order in the electron-phonon interaction, it can occur as a two-phonon process. Depending on the value of final separation between the quasiparticles, the dissociation is either a single event involving absorption of one phonon and emission of another phonon of similar energy, or a two-phonon diffusion of a quasiexciton in momentum space. The dependence of the magnetoroton dissociation time on the filling factor of the incompressible liquid is found.Comment: 4 pages, no figure

A comparison of the mechanical behavior of AlSi7Mg alloy produced through additive manufacturing and subjected to different heat treatment and aging conditions

The versatility and adaptability of Aluminum F357 (AlSi7Mg) make it a popular material in the aerospace and defense industries. In this study, two different laser powder bed fusion systems, EOS M290, and SLM 280HL were used to create specimens of Aluminum F357. These specimens were subjected to five different heat treatments: As-built, stress relief (SR), hot isostatic pressing (HIP), T6, and HIP+T6) as per ASTM F3318-18 standard. The printed specimens were then reduced to tensile bars through machining and tested for mechanical properties as per ASTM E28 using an MTS Landmark tensile testing system. In addition to the mechanical behavior analysis, the study used a JEOL JSM-IT500 SEM to observe and document the fracture produced by the tensile test and a Qness 30 CHD Master+ microhardness testing system to obtain hardness (HV) values of the alloy. The results showed that specimens fabricated in the Z direction had a tendency for higher yield strengths of approximately 225 MPa and although these results were similar between LPBF systems some variances can still be seen. However, these differences between the LPBF systems were observed to be partially mitigated by heat treatments. In conclusion, this study highlights the significance of heat treatment on the mechanical properties of Aluminum F357. The results provide valuable information for the aerospace and defense industries to optimize their processes and produce high-quality components. The compatibility of LPBF system fabrication and the mitigation of differences observed between LPBF machines by heat treatments, further demonstrate the potential of this method for producing high-quality Aluminum F357 components.Mechanical Engineerin

Green Urbanism and its Application to Singapore

Green urbanism has been applied to cities but not in Asia. Seven characteristics of green urbanism are outlined and then applied to Singapore. The Renewable City is not yet a concept for Singapore. The Carbon Neutral City is being developed for an island Palau Ubin and by some firms but not to significant sectors or parts of urban Singapore. The Distributed City is being developed around Singapore’s polycentric model but needs specific infrastructure plans similar to ones developed by Singapore for Tianjin Eco-City. The Biophillic City is being developed as a world first through its Skyrise Greenery initiative and urban landscaping. The Eco-Efficient City is also being demonstrated through Singapore closing the loop on their water and solid waste systems. The Place Based City is very evident in all its 22 sub centres. And the Sustainable Transport City is an Asian leader in integrated transport planning though there are signs of this becoming harder to achieve

Horizontal Branch Stars: The Interplay between Observations and Theory, and Insights into the Formation of the Galaxy

We review HB stars in a broad astrophysical context, including both variable and non-variable stars. A reassessment of the Oosterhoff dichotomy is presented, which provides unprecedented detail regarding its origin and systematics. We show that the Oosterhoff dichotomy and the distribution of globular clusters (GCs) in the HB morphology-metallicity plane both exclude, with high statistical significance, the possibility that the Galactic halo may have formed from the accretion of dwarf galaxies resembling present-day Milky Way satellites such as Fornax, Sagittarius, and the LMC. A rediscussion of the second-parameter problem is presented. A technique is proposed to estimate the HB types of extragalactic GCs on the basis of integrated far-UV photometry. The relationship between the absolute V magnitude of the HB at the RR Lyrae level and metallicity, as obtained on the basis of trigonometric parallax measurements for the star RR Lyrae, is also revisited, giving a distance modulus to the LMC of (m-M)_0 = 18.44+/-0.11. RR Lyrae period change rates are studied. Finally, the conductive opacities used in evolutionary calculations of low-mass stars are investigated. [ABRIDGED]Comment: 56 pages, 22 figures. Invited review, to appear in Astrophysics and Space Scienc

Measurement of the polarisation of W bosons produced with large transverse momentum in pp collisions at sqrt(s) = 7 TeV with the ATLAS experiment

This paper describes an analysis of the angular distribution of W->enu and W->munu decays, using data from pp collisions at sqrt(s) = 7 TeV recorded with the ATLAS detector at the LHC in 2010, corresponding to an integrated luminosity of about 35 pb^-1. Using the decay lepton transverse momentum and the missing transverse energy, the W decay angular distribution projected onto the transverse plane is obtained and analysed in terms of helicity fractions f0, fL and fR over two ranges of W transverse momentum (ptw): 35 < ptw < 50 GeV and ptw > 50 GeV. Good agreement is found with theoretical predictions. For ptw > 50 GeV, the values of f0 and fL-fR, averaged over charge and lepton flavour, are measured to be : f0 = 0.127 +/- 0.030 +/- 0.108 and fL-fR = 0.252 +/- 0.017 +/- 0.030, where the first uncertainties are statistical, and the second include all systematic effects.Comment: 19 pages plus author list (34 pages total), 9 figures, 11 tables, revised author list, matches European Journal of Physics C versio

Observation of a new chi_b state in radiative transitions to Upsilon(1S) and Upsilon(2S) at ATLAS

The chi_b(nP) quarkonium states are produced in proton-proton collisions at the Large Hadron Collider (LHC) at sqrt(s) = 7 TeV and recorded by the ATLAS detector. Using a data sample corresponding to an integrated luminosity of 4.4 fb^-1, these states are reconstructed through their radiative decays to Upsilon(1S,2S) with Upsilon->mu+mu-. In addition to the mass peaks corresponding to the decay modes chi_b(1P,2P)->Upsilon(1S)gamma, a new structure centered at a mass of 10.530+/-0.005 (stat.)+/-0.009 (syst.) GeV is also observed, in both the Upsilon(1S)gamma and Upsilon(2S)gamma decay modes. This is interpreted as the chi_b(3P) system.Comment: 5 pages plus author list (18 pages total), 2 figures, 1 table, corrected author list, matches final version in Physical Review Letter

Search for displaced vertices arising from decays of new heavy particles in 7 TeV pp collisions at ATLAS

We present the results of a search for new, heavy particles that decay at a significant distance from their production point into a final state containing charged hadrons in association with a high-momentum muon. The search is conducted in a pp-collision data sample with a center-of-mass energy of 7 TeV and an integrated luminosity of 33 pb^-1 collected in 2010 by the ATLAS detector operating at the Large Hadron Collider. Production of such particles is expected in various scenarios of physics beyond the standard model. We observe no signal and place limits on the production cross-section of supersymmetric particles in an R-parity-violating scenario as a function of the neutralino lifetime. Limits are presented for different squark and neutralino masses, enabling extension of the limits to a variety of other models.Comment: 8 pages plus author list (20 pages total), 8 figures, 1 table, final version to appear in Physics Letters

Measurement of the inclusive isolated prompt photon cross-section in pp collisions at sqrt(s)= 7 TeV using 35 pb-1 of ATLAS data

A measurement of the differential cross-section for the inclusive production of isolated prompt photons in pp collisions at a center-of-mass energy sqrt(s) = 7 TeV is presented. The measurement covers the pseudorapidity ranges |eta|<1.37 and 1.52<=|eta|<2.37 in the transverse energy range 45<=E_T<400GeV. The results are based on an integrated luminosity of 35 pb-1, collected with the ATLAS detector at the LHC. The yields of the signal photons are measured using a data-driven technique, based on the observed distribution of the hadronic energy in a narrow cone around the photon candidate and the photon selection criteria. The results are compared with next-to-leading order perturbative QCD calculations and found to be in good agreement over four orders of magnitude in cross-section.Comment: 7 pages plus author list (18 pages total), 2 figures, 4 tables, final version published in Physics Letters

Measurement of D*+/- meson production in jets from pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

This paper reports a measurement of D*+/- meson production in jets from proton-proton collisions at a center-of-mass energy of sqrt(s) = 7 TeV at the CERN Large Hadron Collider. The measurement is based on a data sample recorded with the ATLAS detector with an integrated luminosity of 0.30 pb^-1 for jets with transverse momentum between 25 and 70 GeV in the pseudorapidity range |eta| < 2.5. D*+/- mesons found in jets are fully reconstructed in the decay chain: D*+ -> D0pi+, D0 -> K-pi+, and its charge conjugate. The production rate is found to be N(D*+/-)/N(jet) = 0.025 +/- 0.001(stat.) +/- 0.004(syst.) for D*+/- mesons that carry a fraction z of the jet momentum in the range 0.3 < z < 1. Monte Carlo predictions fail to describe the data at small values of z, and this is most marked at low jet transverse momentum.Comment: 10 pages plus author list (22 pages total), 5 figures, 1 table, matches published version in Physical Review

Search for scalar top quark pair production in natural gauge mediated supersymmetry models with the ATLAS detector in pp collisions at sqrt(s) = 7 TeV

The results of a search for pair production of the lighter scalar partners of top quarks in 2.05 fb-1 of pp collisions at sqrt(s) =7 TeV using the ATLAS experiment at the LHC are reported. Scalar top quarks are searched for in events with two same flavour opposite-sign leptons (electrons or muons) with invariant mass consistent with the Z boson mass, large missing transverse momentum and jets in the final state. At least one of the jets is identified as originating from a b-quark. No excess over Standard Model expectations is found. The results are interpreted in the framework of R-parity conserving, gauge mediated Supersymmetry breaking `natural' scenarios, where the neutralino is the next-to-lightest supersymmetric particle. Scalar top quark masses up to 310 GeV are excluded for the lightest neutralino mass between 115 GeV and 230 GeV at 95% confidence level, reaching an exclusion of the scalar top quark mass of 330 GeV for the lightest neutralino mass of 190 GeV. Scalar top quark masses below 240 GeV are excluded for all values of the lightest neutralino mass above the Z boson mass.Comment: 7 pages plus author list (20 pages total), 4 figures, 1 table, matches published PLB versio