Mechanical qubit-light entanglers in hybrid nonlinear qubit optomechanics

Interfacing between matter qubits and light is a crucial provision for numerous quantum technological applications. However, a generic qubit may not directly interact with a relevant optical field mode, and hence, one could necessitate adjusting frequencies to match resonance conditions between parties. In this work, we show how a parametric coupling of the qubit with a mechanical oscillator, in conjunction with the trilinear radiation pressure coupling of the same object with light, can induce maximal qubit-light entanglement at an optimal time. Furthermore, we show how our method enables conditional (dynamical) nonclassical state preparation of the optical field via qubit measurement in the weak (moderate-to-strong) optomechanical coupling regime. Our scheme benefits from not requiring any cooling of the mechanical component and not needing an adjusting of the detunings and transition frequencies to have resonance between any pairs of quantum systems

Influência de diferentes agentes auxiliares do preparo biomecânico na obturação de canais laterais artificiais

The purpose of the present study was to evaluate the influence of some auxiliary agents of biomechanical preparation of the root canal on the filling of artificial lateral canals in extracted human teeth. A total of eighty single-rooted teeth were employed, which were submitted to preparation of three artificial lateral canals in one of the proximal aspects at the cervical, middle and apical thirds, besides one in the buccal aspect. The main canals were prepared by Profile 0.4 rotary instruments through the crown-down technique and irrigated with the irrigants investigated, as follows: Group A - 1% sodium hypochlorite and final irrigation with trisodium EDTA for 5 minutes; Group B - Endogel (2% chlorhexidine gel); Group C - Endo PTC and Dakin's solution and final irrigation with Tergentol- Furacin; and Group D - File Eze. The root canals were obturated by the Tagger's hybrid technique and then radiographed for assessment of the penetration rate of the filling materials in the lateral canals. Analysis of the results demonstrated no statistically significant difference (pObjetivou-se avaliar a influência de alguns agentes auxiliares do preparo biomecânico do canal radicular, na obturação de canais laterais artificiais em dentes humanos extraídos. Foram utilizados oitenta dentes unirradiculados nos quais, previamente, foram confeccionados três canais laterais artificiais em uma das paredes proximais, nos terços cervical, médio e apical e um canal na parede vestibular. Os canais principais foram preparados com instrumentação rotatória, instrumentos Profile 0.4, pela técnica rotatória coroa- ápice e irrigados com a substância irrigadora estudada, sendo no grupo A - hipoclorito de sódio a 1% e irrigação final com EDTA trissódico por 5 minutos; grupo B - Endogel (gel de clorexidina a 2%); grupo C - Endo PTC e solução de Dakin e irrigação final com tergentol-furacin segundo a técnica de Paiva e Antoniazzi e no grupo D - File Eze. Os canais foram obturados pela técnica híbrida de Tagger e, então, radiografados para a análise das extensões de penetração dos materiais obturadores nos canais laterais. Após a análise dos resultados, conclui-se que não houve diferença estatística significante (

Importance of including soil moisture in drought monitoring over the Brazilian semiarid region: An evaluation using the JULES model, in situ observations, and remote sensing

Soil moisture information is essential to monitoring of the intensity of droughts, the start of the rainy season, planting dates and early warnings of yield losses. We assess spatial and temporal trends of drought over the Brazilian semiarid region by combining soil moisture observations from 360 stations, root zone soil moisture from a leading land surface model, and a vegetation health index from remote sensing. The soil moisture dataset was obtained from the network of stations maintained by the National Center of Monitoring and Early Warning of Natural Disasters (Cemaden), in Brazil. Soil water content at 10 to 35 cm depth, for the period 1979–2018, was obtained from running the JULES land surface model (the Joint UK Land Environment Simulator). The modelled soil moisture was correlated with measurements in the common period of 2015–2018, resulting in an average correlation coefficient of 0.48 across the domain. The standardized soil moisture anomaly (SMA) was calculated for the long-term modelled soil moisture and revealed strong negative values during well-known drought periods in the region, especially during El-Niño years. The performance of SMA in identifying droughts during the first 2 months of the raining and cropping season was similar to the Standardized Precipitation Index (SPI), commonly used for drought assessment: 12–14 events were identified by both indices. Finally, the temporal relationship between both SMA and SPI with the Vegetation Health Index (VHI) was assessed using the cross-wavelet transform. The results indicated lagged correlations of 1 to 1.5 months in the annual scale, suggesting that negative trends in SMA and SPI can be an early warning to yield losses during the growing season. Public policies on drought assessment should consider the combination of multiple drought indices, including soil moisture anomaly

Search for supersymmetric particles in scenarios with a gravitino LSP and stau NLSP

Sleptons, neutralinos and charginos were searched for in the context of scenarios where the lightest supersymmetric particle is the gravitino. It was assumed that the stau is the next-to-lightest supersymmetric particle. Data collected with the DELPHI detector at a centre-of-mass energy near 189 GeV were analysed combining the methods developed in previous searches at lower energies. No evidence for the production of these supersymmetric particles was found. Hence, limits were derived at 95% confidence level.Comment: 31 pages, 14 figure

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration

Search for the neutral Higgs bosons of the minimal supersymmetric standard model in pp collisions at root s=7 TeV with the ATLAS detector

A search for neutral Higgs bosons of the Minimal Supersymmetric Standard Model (MSSM) is reported. The analysis is based on a sample of proton-proton collisions at a centre-of-mass energy of 7TeV recorded with the ATLAS detector at the Large Hadron Collider. The data were recorded in 2011 and correspond to an integrated luminosity of 4.7 fb-1 to 4.8 fb-1. Higgs boson decays into oppositely-charged muon or τ lepton pairs are considered for final states requiring either the presence or absence of b-jets. No statistically significant excess over the expected background is observed and exclusion limits at the 95% confidence level are derived. The exclusion limits are for the production cross-section of a generic neutral Higgs boson, φ, as a function of the Higgs boson mass and for h/A/H production in the MSSM as a function of the parameters mA and tan β in the mhmax scenario for mA in the range of 90GeV to 500 GeV. Copyright CERN

Observation of associated near-side and away-side long-range correlations in √sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Two-particle correlations in relative azimuthal angle (Δϕ) and pseudorapidity (Δη) are measured in √sNN=5.02  TeV p+Pb collisions using the ATLAS detector at the LHC. The measurements are performed using approximately 1  μb-1 of data as a function of transverse momentum (pT) and the transverse energy (ΣETPb) summed over 3.1<η<4.9 in the direction of the Pb beam. The correlation function, constructed from charged particles, exhibits a long-range (2<|Δη|<5) “near-side” (Δϕ∼0) correlation that grows rapidly with increasing ΣETPb. A long-range “away-side” (Δϕ∼π) correlation, obtained by subtracting the expected contributions from recoiling dijets and other sources estimated using events with small ΣETPb, is found to match the near-side correlation in magnitude, shape (in Δη and Δϕ) and ΣETPb dependence. The resultant Δϕ correlation is approximately symmetric about π/2, and is consistent with a dominant cos⁡2Δϕ modulation for all ΣETPb ranges and particle pT