Teaching surgical skills in obstetrics and gynaecology using cadaver simulation: an innovative teaching learning method

Background: Transfer of knowledge from teachers to students traditionally occurs in one direction using blackboards, overhead projectors, power-point presentations and lectures. It has many disadvantages. The main challenge in medical education is to teach surgical skills. For the learning of critical interventions, simulation-based training is structured so that the acquisition of new skills does not harm patients. Thus, the objective of this study was to enhance and improve procedural skills of resident doctors of Obstetrics and Gynaecology department of Government Medical College, Miraj using cadaver simulation in doing abdominal hysterectomy.Methods: Second year resident doctors from Obstetrics and Gynaecology department of GMC, Miraj who had completed their first year successfully in terms of basic orientation regarding surgical procedures were taken for study purpose. They were divided in two groups randomly. The first group underwent conventional method of teaching to learn the abdominal hysterectomy procedure and underwent feedback from them regarding the conventional teaching learning method. Then they were allowed to perform the procedure on a live patient and their performance of procedural skill was assessed by DOPS. (Direct observation of procedural skills). The second group underwent innovative method of use of cadaver simulation for the abdominal hysterectomy procedure and feedback on the same. They were allowed to perform the procedure on a live patient and their performance of procedural skill was assessed by DOPS. (Direct observation of procedural skills). All data was collected, analysed and processed to study the outcome of research project.Results: In group B, all resident were fully satisfied with newer method of teaching and learning for abdominal hysterectomy as surgical procedure. As far as, the advantages and disadvantages of teaching and learning are concerned, all residents pointed out large number of disadvantages in the conventional method. Evaluation of the surgical procedural skill was done by DOPS by senior faculty members of the department as per the questionnaire which showed good performance from group B.Conclusions: The benefit of simulation based medical education (SBME) is that it offers both learners and patients a safe environment for practice and error. In addition, SBME can provide a learning cycle of debriefing and feedback for learners as well as assessment and certification for procedures and competency

Nonparametric nonlinear model predictive control

Model Predictive Control (MPC) has recently found wide acceptance in industrial applications, but its potential has been much impeded by linear models due to the lack of a similarly accepted nonlinear modeling or databased technique. Aimed at solving this problem, the paper addresses three issues: (i) extending second-order Volterra nonlinear MPC (NMPC) to higher-order for improved prediction and control; (ii) formulating NMPC directly with plant data without needing for parametric modeling, which has hindered the progress of NMPC; and (iii) incorporating an error estimator directly in the formulation and hence eliminating the need for a nonlinear state observer. Following analysis of NMPC objectives and existing solutions, nonparametric NMPC is derived in discrete-time using multidimensional convolution between plant data and Volterra kernel measurements. This approach is validated against the benchmark van de Vusse nonlinear process control problem and is applied to an industrial polymerization process by using Volterra kernels of up to the third order. Results show that the nonparametric approach is very efficient and effective and considerably outperforms existing methods, while retaining the original data-based spirit and characteristics of linear MPC

Social interactions through the eyes of macaques and humans

Group-living primates frequently interact with each other to maintain social bonds as well as to compete for valuable resources. Observing such social interactions between group members provides individuals with essential information (e.g. on the fighting ability or altruistic attitude of group companions) to guide their social tactics and choice of social partners. This process requires individuals to selectively attend to the most informative content within a social scene. It is unclear how non-human primates allocate attention to social interactions in different contexts, and whether they share similar patterns of social attention to humans. Here we compared the gaze behaviour of rhesus macaques and humans when free-viewing the same set of naturalistic images. The images contained positive or negative social interactions between two conspecifics of different phylogenetic distance from the observer; i.e. affiliation or aggression exchanged by two humans, rhesus macaques, Barbary macaques, baboons or lions. Monkeys directed a variable amount of gaze at the two conspecific individuals in the images according to their roles in the interaction (i.e. giver or receiver of affiliation/aggression). Their gaze distribution to non-conspecific individuals was systematically varied according to the viewed species and the nature of interactions, suggesting a contribution of both prior experience and innate bias in guiding social attention. Furthermore, the monkeys’ gaze behavior was qualitatively similar to that of humans, especially when viewing negative interactions. Detailed analysis revealed that both species directed more gaze at the face than the body region when inspecting individuals, and attended more to the body region in negative than in positive social interactions. Our study suggests that monkeys and humans share a similar pattern of role-sensitive, species- and context-dependent social attention, implying a homologous cognitive mechanism of social attention between rhesus macaques and humans

The ABCD of usability testing

We introduce a methodology for tracking and auditing feedback, errors and suggestions for software packages. This short paper describes how we innovate on the evaluation mechanism, introducing an (Antecedent, Barrier, Consequence and Development) ABCD form, embedded within an eParticipation platform to enable end users to easily report on any usability issues. This methodology will be utilised to improve the STEP cloud eParticipation platform (part of the current STEP Horizon2020 project http://step4youth.eu. The platform is currently being piloted in real life contexts, with the participation of public authorities that are integrating the eParticipation platform into their regular decision-making practices. The project is involving young people, through engagement and motivation strategies and giving them a voice in Environmental decision making at the local level. The pilot evaluation aims to demonstrate how open engagement needs to be embedded within public sector processes and the usability methodology reported here will help to identify the key barriers for wide scale deployment of the platform

Position resolution and particle identification with the ATLAS EM calorimeter

In the years between 2000 and 2002 several pre-series and series modules of the ATLAS EM barrel and end-cap calorimeter were exposed to electron, photon and pion beams. The performance of the calorimeter with respect to its finely segmented first sampling has been studied. The polar angle resolution has been found to be in the range 50-60 mrad/sqrt(E (GeV)). The neutral pion rejection has been measured to be about 3.5 for 90% photon selection efficiency at pT=50 GeV/c. Electron-pion separation studies have indicated that a pion fake rate of (0.07-0.5)% can be achieved while maintaining 90% electron identification efficiency for energies up to 40 GeV.Comment: 32 pages, 22 figures, to be published in NIM

Stress Strengthens Memory of First Impressions of Others' Positive Personality Traits

Encounters with strangers bear potential for social conflict and stress, but also allow the formation of alliances. First impressions of other people play a critical role in the formation of alliances, since they provide a learned base to infer the other's future social attitude. Stress can facilitate emotional memories but it is unknown whether stress strengthens our memory for newly acquired impressions of other people's personality traits. To answer this question, we subjected 60 students (37 females, 23 males) to an impression-formation task, viewing portraits together with brief positive vs. negative behavior descriptions, followed by a 3-min cold pressor stress test or a non-stressful control procedure. The next day, novel and old portraits were paired with single trait adjectives, the old portraits with a trait adjective matching the previous day's behavior description. After a filler task, portraits were presented again and subjects were asked to recall the trait adjective. Cued recall was higher for old (previously implied) than the novel portraits' trait adjectives, indicating validity of the applied test procedures. Overall, recall rate of implied trait adjectives did not differ between the stress and the control group. However, while the control group showed a better memory performance for others' implied negative personality traits, the stress group showed enhanced recall for others' implied positive personality traits. This result indicates that post-learning stress affects consolidation of first impressions in a valence-specific manner. We propose that the stress-induced strengthening of memory of others' positive traits forms an important cue for the formation of alliances in stressful conditions

Energy Linearity and Resolution of the ATLAS Electromagnetic Barrel Calorimeter in an Electron Test-Beam

A module of the ATLAS electromagnetic barrel liquid argon calorimeter was exposed to the CERN electron test-beam at the H8 beam line upgraded for precision momentum measurement. The available energies of the electron beam ranged from 10 to 245 GeV. The electron beam impinged at one point corresponding to a pseudo-rapidity of eta=0.687 and an azimuthal angle of phi=0.28 in the ATLAS coordinate system. A detailed study of several effects biasing the electron energy measurement allowed an energy reconstruction procedure to be developed that ensures a good linearity and a good resolution. Use is made of detailed Monte Carlo simulations based on Geant which describe the longitudinal and transverse shower profiles as well as the energy distributions. For electron energies between 15 GeV and 180 GeV the deviation of the measured incident electron energy over the beam energy is within 0.1%. The systematic uncertainty of the measurement is about 0.1% at low energies and negligible at high energies. The energy resolution is found to be about 10% sqrt(E) for the sampling term and about 0.2% for the local constant term

Facial expressions depicting compassionate and critical emotions: the development and validation of a new emotional face stimulus set

Attachment with altruistic others requires the ability to appropriately process affiliative and kind facial cues. Yet there is no stimulus set available to investigate such processes. Here, we developed a stimulus set depicting compassionate and critical facial expressions, and validated its effectiveness using well-established visual-probe methodology. In Study 1, 62 participants rated photographs of actors displaying compassionate/kind and critical faces on strength of emotion type. This produced a new stimulus set based on N = 31 actors, whose facial expressions were reliably distinguished as compassionate, critical and neutral. In Study 2, 70 participants completed a visual-probe task measuring attentional orientation to critical and compassionate/kind faces. This revealed that participants lower in self-criticism demonstrated enhanced attention to compassionate/kind faces whereas those higher in self-criticism showed no bias. To sum, the new stimulus set produced interpretable findings using visual-probe methodology and is the first to include higher order, complex positive affect displays

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011