The Track-Finding Processor for the Level-1 Trigger of the CMS Endcap Muon System

We report on the development and test of a prototype track-finding processor for the level-1 trigger of the CMS endcap muon system. The processor links track segments identified in the cathode strip chambers of the endcap muon system into complete three-dimensional tracks, and measures the transverse momentum of the best track candidates from the sagitta induced by the magnetic bending. The algorithms are implemented using SRAM and Xilinx Virtex FPGAs, and the measured latency is 15 clocks. We also report on the design of the pre-production prototype, which achieves further latency and size reduction using state-of-the-art technology. (4 refs)

TAXON version 1.1: A simple way to generate uniform and fractionally weighted three-item matrices from various kinds of biological data

An open-access program allowing three-item statement matrices to be generated from data such as molecular sequences does not exist so far. The recently developed LisBeth package (ver. 1.0) allows representing hypotheses of homology among taxa or areas directly as rooted trees or as hierarchies; however, this is not a standard matrix-based platform. Here we present "TAXON version 1.1" (TAXON), a program designed for building three-item statement-matrices from binary, additive (ordered) and non-additive (unordered) multistate characters, with both fractional and uniform weighting of the resulted statements.Comment: 4 pages, 1 figure, 1 Supplement, 3 Supplemental example

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Efficiency of Finding Muon Track Trigger Primitives in CMS Cathode Strip Chambers

In the CMS Experiment, muon detection in the forward direction is accomplished by cathode strip chambers~(CSC). These detectors identify muons, provide a fast muon trigger, and give a precise measurement of the muon trajectory. There are 468 six-plane CSCs in the system. The efficiency of finding muon trigger primitives (muon track segments) was studied using~36 CMS CSCs and cosmic ray muons during the Magnet Test and Cosmic Challenge~(MTCC) exercise conducted by the~CMS experiment in~2006. In contrast to earlier studies that used muon beams to illuminate a very small chamber area ($< \! 0.01$~m$^2$), results presented in this paper were obtained by many installed CSCs operating {\em in situ} over an area of $\approx \! 23$~m$^2$ as a part of the~CMS experiment. The efficiency of finding 2-dimensional trigger primitives within 6-layer chambers was found to be~$99.93 \pm 0.03\%$. These segments, found by the CSC electronics within $800$~ns after the passing of a muon through the chambers, are the input information for the Level-1 muon trigger and, also, are a necessary condition for chambers to be read out by the Data Acquisition System

Performance and Operation of the CMS Electromagnetic Calorimeter

The operation and general performance of the CMS electromagnetic calorimeter using cosmic-ray muons are described. These muons were recorded after the closure of the CMS detector in late 2008. The calorimeter is made of lead tungstate crystals and the overall status of the 75848 channels corresponding to the barrel and endcap detectors is reported. The stability of crucial operational parameters, such as high voltage, temperature and electronic noise, is summarised and the performance of the light monitoring system is presented

Performance of the CMS muon trigger system in proton-proton collisions at √s = 13 TeV

The muon trigger system of the CMS experiment uses a combination of hardware and software to identify events containing a muon. During Run 2 (covering 2015-2018) the LHC achieved instantaneous luminosities as high as 2 × 10 cm s while delivering proton-proton collisions at √s = 13 TeV. The challenge for the trigger system of the CMS experiment is to reduce the registered event rate from about 40 MHz to about 1 kHz. Significant improvements important for the success of the CMS physics program have been made to the muon trigger system via improved muon reconstruction and identification algorithms since the end of Run 1 and throughout the Run 2 data-taking period. The new algorithms maintain the acceptance of the muon triggers at the same or even lower rate throughout the data-taking period despite the increasing number of additional proton-proton interactions in each LHC bunch crossing. In this paper, the algorithms used in 2015 and 2016 and their improvements throughout 2017 and 2018 are described. Measurements of the CMS muon trigger performance for this data-taking period are presented, including efficiencies, transverse momentum resolution, trigger rates, and the purity of the selected muon sample. This paper focuses on the single- and double-muon triggers with the lowest sustainable transverse momentum thresholds used by CMS. The efficiency is measured in a transverse momentum range from 8 to several hundred GeV

Calibration of the CMS Drift Tube Chambers and Measurement of the Drift Velocity with Cosmic Rays

Peer reviewe

CMS Data Processing Workflows during an Extended Cosmic Ray Run

Peer reviewe

CMS physics technical design report : Addendum on high density QCD with heavy ions

Peer reviewe

Aligning the CMS Muon Chambers with the Muon Alignment System during an Extended Cosmic Ray Run

Peer reviewe