Adsorption of Phosphonic-Acid-Functionalized Porphyrin Molecules on TiO2(110)

We studied the adsorption geometry and bonding of mono- and tetraphosphonic-acid-functionalized tetraphenylporphyrin molecules on rutile TiO2(110) surfaces. The investigation was carried out by means of X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure (NEXAFS) measurements. We found that the molecules bind covalently to the surface in a mixed monodentate and bidentate mode implying deprotonation of one or two phosphonate hydroxyl groups. Our NEXAFS data suggest that molecules containing one functional phosphonic acid group are on average tilted further away from the surface than molecules with four functional groups. The highest occupied electronic state of both molecules is in the band gap at 2.1 eV below the Fermi level. Our results demonstrate that the number of functional phosphonic acid groups determine the adsorption geometry of tetraphenylporphyrins.Fil: Fernández, Cynthia Carolina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Wechsler, Daniel. Universitat Erlangen-Nuremberg; AlemaniaFil: Rocha, Tulio C. R.. Brazilian Center for Research on Energy and Materials ; BrasilFil: Steinrück, Hans-Peter. Universitat Erlangen-Nuremberg; AlemaniaFil: Lytken, Ole. Universitat Erlangen-Nuremberg; AlemaniaFil: Williams, Federico José. Universitat Erlangen-Nuremberg; Alemania. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentin

Wet-Chemically Prepared Porphyrin Layers on Rutile TiO2(110)

Porphyrins are large organic molecules that are interesting for different applications, such as photovoltaic cells, gas sensors, or in catalysis. For many of these applications, the interactions between adsorbed molecules and surfaces play a crucial role. Studies of porphyrins on surfaces typically fall into one of two groups: (1) evaporation onto well-defined single-crystal surfaces under well-controlled ultrahigh vacuum conditions or (2) more application-oriented wet chemical deposition onto less well-defined high surface area surfaces under ambient conditions. In this study, we will investigate the wet chemical deposition of 5-(monocarboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP) on well-defined rutile TiO2 (110) single crystals under ambient conditions. Prior to deposition, the TiO2(110) crystals were also cleaned wet-chemically under ambient conditions, meaning none of the preparation steps were done in ultrahigh vacuum. However, after each preparation step, the surfaces were characterized in ultrahigh vacuum with X-ray photoelectron spectroscopy (XPS) and the result was compared with porphyrin layers prepared in ultrahigh vacuum (UHV) by evaporation. The differences of both preparations when exposed to zinc ion solutions will also be discussed.Fil: Wechsler, Daniel. Universitat Erlangen-Nuremberg; AlemaniaFil: Fernández, Cynthia Carolina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Köbl, Julia. Universitat Erlangen-Nuremberg; AlemaniaFil: Augustin, Lisa Marie. Universitat Erlangen-Nuremberg; AlemaniaFil: Stumm, Corina. Universitat Erlangen-Nuremberg; AlemaniaFil: Norbert Jux. Universitat Erlangen-Nuremberg; AlemaniaFil: Steinruck, Hans Peter. Universitat Erlangen-Nuremberg; AlemaniaFil: Williams, Federico José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; ArgentinaFil: Lytken, Ole. Universitat Erlangen-Nuremberg; Alemani

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface. This results in an error for rough films, and the magnitude of this error depends on the kinetic energy of the photoelectrons analyzed. We have used this kinetic-energy dependency to estimate the roughnesses of thin porphyrin films grown on rutile TiO2(110). We used two different molecules: cobalt (II) monocarboxyphenyl-10,15,20-triphenylporphyrin (CoMCTPP), with carboxylic-acid anchor groups, and cobalt (II) tetraphenylporphyrin (CoTPP), without anchor groups. We find CoMCTPP to grow as rough films at room temperature across the studied coverage range, whereas for CoTPP the first two layers remain smooth and even; depositing additional CoTPP results in rough films. Although, XPS is not a common technique for measuring roughness, it is fast and provides information of both roughness and thickness in one measurement.Fil: Kataev, Elmar. Universitat Erlangen-Nuremberg; AlemaniaFil: Wechsler, Daniel. Universitat Erlangen-Nuremberg; AlemaniaFil: Williams, Federico José. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Química, Física de los Materiales, Medioambiente y Energía. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Química, Física de los Materiales, Medioambiente y Energía; Argentina. Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Departamento de Química Inorgánica, Analítica y Química Física; ArgentinaFil: Köbl, Julia. Universitat Erlangen-Nuremberg; AlemaniaFil: Tsud, Natalia. Karlova Univerzita (cuni); República ChecaFil: Franchi, Stefano. Istituto di Struttura della Materia; Italia. Consiglio Nazionale delle Ricerche; ItaliaFil: Steinruck, Hans Peter. Universitat Erlangen-Nuremberg; AlemaniaFil: Lytken, Ole. Universitat Erlangen-Nuremberg; Alemani

Epitaxial Metal Halide Perovskites by Inkjet‐Printing on Various Substrates

Metal‐halide‐perovskites revolutionized the field of thin‐film semiconductor technology, due to their favorable optoelectronic properties and facile solution processing. Further improvements of perovskite thin‐film devices require structural coherence on the atomic scale. Such perfection is achieved by epitaxial growth, a method that is based on the use of high‐end deposition chambers. Here epitaxial growth is enabled via a ≈1000 times cheaper device, a single nozzle inkjet printer. By printing, single‐crystal micro‐ and nanostructure arrays and crystalline coherent thin films are obtained on selected substrates. The hetero‐epitaxial structures of methylammonium PbBr3 grown on lattice matching substrates exhibit similar luminescence as bulk single crystals, but the crystals phase transitions are shifted to lower temperatures, indicating a structural stabilization due to interfacial lattice anchoring by the substrates. Thus, the inkjet‐printing of metal‐halide perovskites provides improved material characteristics in a highly economical way, as a future cheap competitor to the high‐end semiconductor growth technologies.DFG, 404984854, Bleifreie Perovksite für die RöntgendetektionDFG, 399073171, GRK 2495: Energiekonvertierungssysteme: von Materialien zu Bauteile

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements