Airway smooth muscle cells from severe asthma patients with fixed airflow obstruction are responsive to steroid and bronchodilator treatment in vitro

Asthma is characterised by recurrent symptoms associated with variable airflow obstruction and airway hyperresponsiveness, all of which are improved with combination inhaled corticosteroid (ICS)/long-acting β-agonist (LABA) treatment in mild-to-moderate asthma [1]. A proportion of patients however develop fixed airflow obstruction (FAO), despite optimised treatment. FAO is prevalent in up to 60% of patients with severe asthma and is associated with a more rapid decline in lung function and increased symptoms [2]. The underlying mechanisms of FAO in asthma are poorly understood; therefore, development of novel treatment strategies remains a challenge. Airway smooth muscle cells (ASMCs) are the major effector cells of bronchoconstriction in asthma and also contribute to the inflammatory process by secreting pro-inflammatory cytokines and chemokines. Therefore, ASMCs are a major target of both β2-agonist and ICS treatment [3]. Although several studies have suggested that steroid signalling [4] or β2-adrenoceptor (β2AR) signalling may be abnormally regulated in severe asthma [5], it remains unknown whether impaired airway smooth muscle corticosteroid and/or β2-agonist response may contribute to the development of FAO. The aim of this study was to investigate whether primary human ASMCs obtained from severe asthma patients with FAO differ in their response to β2-agonists and corticosteroids compared with asthma patients without FAO and healthy controls. We hypothesised that ASMCs from asthma patients with FAO are less responsive to corticosteroid and β2-agonist treatment than those from patients without FA

An Evaluation of Peer-Rated Surgical Skill and its Relationship With Detrusor Muscle Sampling in Transurethral Resection of Bladder Tumor

OBJECTIVE: To assess the reliability of peer-review of TURBT videos as a means to evaluate surgeon skill and its relationship to detrusor sampling. METHODS: Urologists from an academic health system submitted TURBT videos in 2019. Ten blinded peers evaluated each surgeon\u27s performance using a 10-item scoring instrument to quantify surgeon skill. Normalized composite skill scores for each surgeon were calculated using peer ratings. For surgeons submitting videos, we retrospectively reviewed all TURBT pathology results (2018-2019) to assess surgeon-specific detrusor sampling. A hierarchical logistic regression model was fit to evaluate the association between skill and detrusor sampling, adjusting for patient and surgeon factors. RESULTS: Surgeon skill scores and detrusor sampling rates were determined for 13 surgeons performing 245 TURBTs. Skill scores varied from -6.0 to 5.1 [mean: 0; standard deviation (SD): 2.40]. Muscle was sampled in 72% of cases, varying considerably across surgeons (mean: 64.5%; SD: 30.7%). Among 8 surgeons performing \u3e5 TURBTs during the study period, adjusted detrusor sampling rate was associated with sending separate deep specimens (odds ratio [OR]: 1.97; 95% confidence interval [CI]: 1.02-3.81, P = .045) but not skill (OR: 0.81; 95% CI: 0.57-1.17, P = .191). CONCLUSION: Surgeon skill was not associated with detrusor sampling, suggesting there may be other drivers of variability of detrusor sampling in TURBT

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction

Differential modulation of corticospinal excitability during haptic sensing of 2-D patterns vs. textures

<p>Abstract</p> <p>Background</p> <p>Recently, we showed a selective enhancement in corticospinal excitability when participants actively discriminated raised 2-D symbols with the index finger. This extra-facilitation likely reflected activation in the premotor and dorsal prefrontal cortices modulating motor cortical activity during attention to haptic sensing. However, this parieto-frontal network appears to be finely modulated depending upon whether haptic sensing is directed towards material or geometric properties. To examine this issue, we contrasted changes in corticospinal excitability when young adults (n = 18) were engaged in either a roughness discrimination on two gratings with different spatial periods, or a 2-D pattern discrimination of the relative offset in the alignment of a row of small circles in the upward or downward direction.</p> <p>Results</p> <p>A significant effect of task conditions was detected on motor evoked potential amplitudes, reflecting the observation that corticospinal facilitation was, on average, ~18% greater in the pattern discrimination than in the roughness discrimination.</p> <p>Conclusions</p> <p>This differential modulation of corticospinal excitability during haptic sensing of 2-D patterns vs. roughness is consistent with the existence of preferred activation of a visuo-haptic cortical dorsal stream network including frontal motor areas during spatial vs. intensive processing of surface properties in the haptic system.</p

Measurement of the flavour composition of dijet events in pp collisions at root s=7 TeV with the ATLAS detector

This paper describes a measurement of the flavour composition of dijet events produced in pp collisions at &#8730;s=7 TeV using the ATLAS detector. The measurement uses the full 2010 data sample, corresponding to an integrated luminosity of 39 pb−1. Six possible combinations of light, charm and bottom jets are identified in the dijet events, where the jet flavour is defined by the presence of bottom, charm or solely light flavour hadrons in the jet. Kinematic variables, based on the properties of displaced decay vertices and optimised for jet flavour identification, are used in a multidimensional template fit to measure the fractions of these dijet flavour states as functions of the leading jet transverse momentum in the range 40 GeV to 500 GeV and jet rapidity |y|&#60;2.1. The fit results agree with the predictions of leading- and next-to-leading-order calculations, with the exception of the dijet fraction composed of bottom and light flavour jets, which is underestimated by all models at large transverse jet momenta. The ability to identify jets containing two b-hadrons, originating from e.g. gluon splitting, is demonstrated. The difference between bottom jet production rates in leading and subleading jets is consistent with the next-to-leading-order predictions

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN