Seismic Response Comparison of Full-Scale Moment-Resisting Timber Frame and Joint Test Result

This paper presents the seismic performance of the moment-resisting timber frame (MRTF). In Japanese urban areas, there are many urban small houses, and it is difficult to design a wooden building to ensure both the seismic performance and the comfortable plan that effectively makes use of small and constrained sites, and it also lacks flexibility in the design. Therefore, expectations are rising for high performance of MRTF using residential members. In this study, to clarify the seismic performance and the dynamic behavior under the heavy seismic wave, we conducted a full-shaking table test of the 2-story MRTF composed of residential members with short sides. The structure was designed by the allowable stress design (ASD) to resist 1.5 times the earthquake ground motion required in Japanese Building Standard Law (BSL) and linear analysis under frequent loading conditions (snow, wind, and earthquake events corresponding to a return period of approximately 50 years), and the unidirectional full-scale shaking table tests were conducted. The structure did not collapse up to a peak ground acceleration of 0.87 g and experienced ∼1/20 rad of maximum interstory drift. This indicates that an MRTF designed by the method can secure the seismic performance for a large earthquake. The time-response analysis was also conducted based on the joint tests, but the stiffness of the analytical result is little lower than the experimental result. Then, we tried the parameter identification using quality engineering to reproduce the experimental behavior. The results indicated that the moment resistance of the joint was higher because of the stressed-skin effect of the floor

Spatially resolved measurement of helium atom emission line spectrum in scrape-off layer of Heliotron J by near-infrared Stokes spectropolarimetry

1視線の観測のみで核融合プラズマ中のヘリウム近赤外輝線の発光分布を推定. 京都大学プレスリリース. 2022-09-26.For plasma spectroscopy, Stokes spectropolarimetry is used as a method to spatially invert the viewing-chord-integrated spectrum on the basis of the correspondence between the given magnetic field profile along the viewing chord and the Zeeman effect appearing on the spectrum. Its application to fusion-related toroidal plasmas is, however, limited owing to the low spatial resolution as a result of the difficulty in distinguishing between the Zeeman and Doppler effects. To resolve this issue, we increased the relative magnitude of the Zeeman effect by observing a near-infrared emission line on the basis of the greater wavelength dependence of the Zeeman effect than of the Doppler effect. By utilizing the increased Zeeman effect, we are able to invert the measured spectrum with a high spatial resolution by Monte Carlo particle transport simulation and by reproducing the measured spectra with the semiempirical adjustment of the recycling condition at the first walls. The inversion result revealed that when the momentum exchange collisions of atoms are negligible, the velocity distribution of core-fueling atoms is mainly determined by the initial distribution at the time of recycling. The inversion result was compared with that obtained using a two-point emission model used in previous studies. The latter approximately reflects the parameters of atoms near the emissivity peak

サイセンタン ノ サンジゲン イメージング システム : シンゾウ ケッカン ゲカ ニオケル Virtual Reality ギジュツ ノ ユウヨウセイ

滋賀医科大学心臓血管外科では医療用画像を三次元構築し、臓器を立体表示するVirtual Reality (VR) 技術を用いて心臓血管系の3D解析研究を進めている。VRでは臓器の内腔を可視化することができ、また3D構築した画像に直接介入し、従来の2D解析では評価困難であった複雑な構造も術者の視点で直観的に計測できるという利点がある。あらゆる医療画像データを三次元化し, かつ直感的な立体計測が可能なVR技術は, これまでの診断精度を上回る形態学的な情報を臨床医に提示し得ると考えられる。特に外科医にとって有用な手術支援VR画像は, 難易度が高い手術の治療成績を向上させる可能性が高い。Adequate preoperative planning may facilitate successful procedures in cardiovascular surgery. We have newly developed a system the Vesalius 3D suite, combining three-dimensional (3D) image-processing software with an optic-tracking spatial navigation, allowing quick, accessible 3D image interpretation for virtual reality (VR) exploration and measurement of complex anatomy. In this review, we present a novel method of virtual imaging analysis for preoperative planning and simulation in cardiovascular operation using this 3D-VR system. Based on unimodal or multimodal medical imaging data, DICOM data sets can be reconstructed for 3D visualization. Virtually reconstructed images can be viewed on stereoscopic 3D display, revealing each patient’s specific anatomy and the internal structures in exquisite detail. Highly accessible 3D interpretation promptly permits precise and intuitive measurements of repair-relevant anatomical parameters including geometrically complex shapes. This technology may promote understanding of form and function in the cardiovascular system, and facilitate operative procedures in more challenging cases. Furthermore, this system can be especially valuable for any surgeon to gain experience in practicing for rarely-performed procedures or uncommon patient-specific preoperative surgical simulations

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements