Simultaneous determination of Deoxynivalenol, Deoxynivalenol-3-Glucoside and Nivalenol in wheat grains by HPLC-PDA with immunoaffinity column cleanup

Deoxynivalenol-3-glucoside (D3G) is a modified mycotoxin formed by the metabolism of plants through the conjugation of deoxynivalenol (DON) with glucose. Toxicology studies of D3G for human and animal health are still under investigation, and the development of practical and reliable methods for its direct determination, especially in cereal matrices, is of great importance. In the present study, a methodology for simultaneous determination of D3G, DON, and nivalenol (NIV) in wheat grains, using immunoaffinity column (IAC) cleanup, separation by C18 column and detection by ultraviolet (UV) absorption, was optimized and in-house validated. The results demonstrated adequate values of D3G recovery from IAC and spiked samples. Intraday precision, linearity, limit of detection and limit of quantification (LOQ) were also adequate for the determination of these mycotoxins. Range of applicability varied from 47.1 to 1000 g/kg for D3G and from 31.3 to 1000 g/kg for DON and NIV, with recovery ranging from 84.7±7.2 % to 112.3±8.1Felipe Trombete is grateful for a doctoral fellowship provided by the Brazilian Federal Agency for Support and Evaluation of Graduate Education (CAPES)

Biological response of an in vitro human 3D lung cell model exposed to brake wear debris varies based on brake pad formulation

Wear particles from automotive friction brake pads of various sizes, morphology, and chemical composition are significant contributors towards particulate matter. Knowledge concerning the potential adverse effects following inhalation exposure to brake wear debris is limited. Our aim was, therefore, to generate brake wear particles released from commercial low-metallic and non-asbestos organic automotive brake pads used in mid-size passenger cars by a full-scale brake dynamometer with an environmental chamber simulating urban driving and to deduce their potential hazard in vitro. The collected fractions were analysed using scanning electron microscopy via energy-dispersive X-ray spectroscopy (SEM-EDS) and Raman microspectroscopy. The biological impact of the samples was investigated using a human 3D multicellular model consisting of human epithelial cells (A549) and human primary immune cells (macrophages and dendritic cells) mimicking the human epithelial tissue barrier. The viability, morphology, oxidative stress, and (pro-)inflammatory response of the cells were assessed following 24 h exposure to similar to 12, similar to 24, and similar to 48 A mu g/cm(2) of non-airborne samples and to similar to 3.7 A mu g/cm(2) of different brake wear size fractions (2-4, 1-2, and 0.25-1 A mu m) applying a pseudo-air-liquid interface approach. Brake wear debris with low-metallic formula does not induce any adverse biological effects to the in vitro lung multicellular model. Brake wear particles from non-asbestos organic formulated pads, however, induced increased (pro-)inflammatory mediator release from the same in vitro system. The latter finding can be attributed to the different particle compositions, specifically the presence of anatase.Web of Science9272351233

Statement on the risks for public health related to a possible increase of the maximum level of deoxynivalenol for certain semi-processed cereal products

The European Food Safety Authority (EFSA) was asked to deliver a scientific opinion on the risks for public health related to a possible increase of the maximum level (ML) of deoxynivalenol (DON) for certain semi-processed cereal products from 750 µg/kg to 1000 µg/kg. For this statement, EFSA relied on existing occurrence data on DON in food collected between 2007 and 2012 and reported by 21 European countries. Due to the lack of appropriate occurrence data from pre-market monitoring, the impact of increasing the ML was estimated using a simulation approach, resulting in an expected increase in mean levels of the respective food products by a factor of 1.14-1.16. Based on median chronic exposure in several age classes, the percentage of consumers exceeding the group provisional maximum tolerable daily intake (PMTDI) of 1 μg/kg body weight (b.w.) for the sum of DON and its 3- and 15-acetyl-derivatives, established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) in 2010, is approximately 2-fold higher with the suggested increased ML than with the current ML. Several acute exposure scenarios resulted in exceedance of the group acute reference dose (ARfD) of 8 µg/kg b.w. established by JECFA with up to 25.9 % of the consumption days above the group ARfD. The EFSA Scientific Panel on Contaminants in the Food Chain notes that the group health based guidance values (HBGVs) include 3-Ac-DON and 15-Ac-DON. The exposure from the acetyl-derivatives has not been covered in this statement, since the acetyl-derivatives are not included in the current or suggested increased ML and because only few occurrence data are available. An increase of the DON ML can be expected to be associated with an increase of the levels of DON and Ac-DONs, and can therefore increase the exposure and consequently the exceedances of the group HBGVs

Risks to human and animal health related to the presence of deoxynivalenol and its acetylated and modified forms in food and feed

Deoxynivalenol (DON) is a mycotoxin primarily produced by Fusarium fungi, occurring predominantly in cereal grains. Following the request of the European Commission, the CONTAM Panel assessed the risk to animal and human health related to DON, 3-acetyl-DON (3-Ac-DON), 15-acetyl-DON (15-Ac-DON) and DON-3-glucoside in food and feed. A total of 27,537, 13,892, 7,270 and 2,266 analytical data for DON, 3-Ac-DON, 15-Ac-DON and DON-3-glucoside, respectively, in food, feed and unprocessed grains collected from 2007 to 2014 were used. For human exposure, grains and grain-based products were main sources, whereas in farm and companion animals, cereal grains, cereal by-products and forage maize contributed most. DON is rapidly absorbed, distributed, and excreted. Since 3-Ac-DON and 15-Ac-DON are largely deacetylated and DON-3-glucoside cleaved in the intestines the same toxic effects as DON can be expected. The TDI of 1 μg/kg bw per day, that was established for DON based on reduced body weight gain in mice, was therefore used as a group-TDI for the sum of DON, 3-Ac-DON, 15-Ac-DON and DON-3-glucoside. In order to assess acute human health risk, epidemiological data from mycotoxicoses were assessed and a group-ARfD of 8 μg/kg bw per eating occasion was calculated. Estimates of acute dietary exposures were below this dose and did not raise a health concern in humans. The estimated mean chronic dietary exposure was above the group-TDI in infants, toddlers and other children, and at high exposure also in adolescents and adults, indicating a potential health concern. Based on estimated mean dietary concentrations in ruminants, poultry, rabbits, dogs and cats, most farmed fish species and horses, adverse effects are not expected. At the high dietary concentrations, there is a potential risk for chronic adverse effects in pigs and fish and for acute adverse effects in cats and farmed mink

Ability of Trichoderma hamatum isolated from plastics-polluted environments to attack petroleum-based, synthetic polymer films

Microorganisms colonizing plastic waste material collected in composting-, landfill-, and anaerobic digestion plants were isolated to obtain novel strains maximally adapted to the degradation of plastics due to long-term contact with plastic polymers. Twenty-six bacterial strains were isolated and identified by the 16 S rRNA method, and eighteen strains of yeasts and fungi using 18 S rRNA and the internal transcribed spacer ITS sequencing of the 18 S rRNA gene. In selected strains, the ability to degrade linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE), polystyrene (PS), and polyvinyl chloride (PVC) was tested in aerobic liquid-medium cultures. An oxidative, two-step pretreatment of LLDPE and LDPE using-or UV-irradiation followed by a high-temperature treatment was carried out, and the pretreated plastics were also included in the degradation experiments. The respective weight losses after biodegradation by Trichoderma hamatum were: virgin and \u3b3/T90-pretreated LLDPE (2.2 \ub1 1.2 and 3.9 \ub1 0.5%), virgin and UV/T60-pretreated LDPE (0.5 \ub1 0.4 and 1.3 \ub1 0.4%), and virgin PS (0.9 \ub1 0.4%). The Fourier transform infrared spectroscopy (FTIR) analysis showed that during the treatment of pretreated LLDPE, T. hamatum attacked low molecular weight LLDPE oligomers, reducing the functional groups (carbonyl C = O), which was paralleled by a slight increase of the molar mass of pretreated LLDPE and a decrease of the dispersity index, as demonstrated by gel permeation chromatography (GPC). Thermogravimetric analysis (TGA) highlighted the formation of functional groups on LLDPE due to polymer pretreatment that favored fungal attack at the polymer surface. The results provide insight into microbial consortia that spontaneously colonize the surface of plastics in various environments and their capability to attack plastic polymers