2,799 research outputs found
Effect of pine bark and compost on the biological denitrification process of non-hazardous landfill leachate: Focus on the microbiology
In an attempt to optimize the cost-efficiency of landfill leachate treatment by biological denitrification process, our study focused on finding low-cost alternatives to traditional expensive chemicals such as composted garden refuse and pine bark, which are both available in large amount in South African landfill sites. The overall objective was to assess the behaviour of the bacterial community in relation to each substrate while treating high strength landfill leachates. Denitrification processes in fixed bed reactors were simulated at laboratory scale using anaerobic batch tests with immature compost and pine bark. High strength leachate was simulated using a solution of water and nitrate at a concentration of 500 mg l−1. Results suggest that pine bark released large amounts of phenolic compounds and hydroxylated benzene rings, which both can delay the acclimatization time and inhibit the biological denitrification (only 30% efficiency). Furthermore, presence of potential pathogens like Enterobacter and Pantoea agglomerans prevents the applicability of the pine bark in full-scale operations. On the other hand, lightly composted garden refuse (CGR) offered an adequate substrate for the formation of a biofilm necessary to complete the denitrification process (total nitrate removal observed within 7 days). CGR further contributed to a rapid establishment of an active consortium of denitrifiers including Acinetobacter, Rhizobium, Thermomonas, Rheinheimera, Phaeospirillum and Flavobacterium. Clearly the original composition, nature, carbon to nitrogen ratio (C/N) and degree of maturity and stability of the substrates play a key role in the denitrification process, impacting directly on the development of the bacterial population and, therefore, on the long-term removal efficiency
High real-space resolution measurement of the local structure of Ga_1-xIn_xAs using x-ray diffraction
High real-space resolution atomic pair distribution functions (PDF)s from the
alloy series Ga_1-xIn_xAs have been obtained using high-energy x-ray
diffraction. The first peak in the PDF is resolved as a doublet due to the
presence of two nearest neighbor bond lengths, Ga-As and In-As, as previously
observed using XAFS. The widths of nearest, and higher, neighbor pairs are
analyzed by separating the strain broadening from the thermal motion. The
strain broadening is five times larger for distant atomic neighbors as compared
to nearest neighbors. The results are in agreement with model calculations.Comment: 4 pages, 5 figure
Characterization of cowpea cultivars for grain size, color, and biofortification.
Cowpea crops have high socioeconomic importance in the Northeast region of Brazil. These crops generate employment and income; in addition, it is an excellent source of protein, minerals, vitamins, and dietary fiber, and contributes to the food security of thousands of people. Biofortification of cowpea with iron, zinc, and proteins can contribute to prevent the higher hunger. The objective of this work was to assess iron, zinc, and protein contents in cowpea grains of different cultivars and the effect of grain size and color on the contents of these nutrients
Proposal of an extended t-J Hamiltonian for high-Tc cuprates from ab initio calculations on embedded clusters
A series of accurate ab initio calculations on Cu_pO-q finite clusters,
properly embedded on the Madelung potential of the infinite lattice, have been
performed in order to determine the local effective interactions in the CuO_2
planes of La_{2-x}Sr_xCuO_4 compounds. The values of the first-neighbor
interactions, magnetic coupling (J_{NN}=125 meV) and hopping integral
(t_{NN}=-555 meV), have been confirmed. Important additional effects are
evidenced, concerning essentially the second-neighbor hopping integral
t_{NNN}=+110meV, the displacement of a singlet toward an adjacent colinear
hole, h_{SD}^{abc}=-80 meV, a non-negligible hole-hole repulsion
V_{NN}-V_{NNN}=0.8 eV and a strong anisotropic effect of the presence of an
adjacent hole on the values of the first-neighbor interactions. The dependence
of J_{NN} and t_{NN} on the position of neighbor hole(s) has been rationalized
from the two-band model and checked from a series of additional ab initio
calculations. An extended t-J model Hamiltonian has been proposed on the basis
of these results. It is argued that the here-proposed three-body effects may
play a role in the charge/spin separation observed in these compounds, that is,
in the formation and dynamic of stripes.Comment: 24 pages, 4 figures, submitted to Phys. Rev.
Search for CP violation in decays
A model-independent search for direct CP violation in the Cabibbo suppressed
decay in a sample of approximately 370,000 decays is
carried out. The data were collected by the LHCb experiment in 2010 and
correspond to an integrated luminosity of 35 pb. The normalized Dalitz
plot distributions for and are compared using four different
binning schemes that are sensitive to different manifestations of CP violation.
No evidence for CP asymmetry is found.Comment: 13 pages, 8 figures, submitted to Phys. Rev.
pH Modulation of Efflux Pump Activity of Multi-Drug Resistant Escherichia coli: Protection During Its Passage and Eventual Colonization of the Colon
BACKGROUND:Resistance Nodulation Division (RND) efflux pumps of Escherichia coli extrude antibiotics and toxic substances before they reach their intended targets. Whereas these pumps obtain their energy directly from the proton motive force (PMF), ATP-Binding Cassette (ABC) transporters, which can also extrude antibiotics, obtain energy from the hydrolysis of ATP. Because E. coli must pass through two pH distinct environments of the gastrointestinal system of the host, it must be able to extrude toxic agents at very acidic and at near neutral pH (bile salts in duodenum and colon for example). The herein described study examines the effect of pH on the extrusion of ethidium bromide (EB). METHODOLOGY/PRINCIPAL FINDINGS:E. coli AG100 and its tetracycline induced progeny AG100(TET) that over-expresses the acrAB efflux pump were evaluated for their ability to extrude EB at pH 5 and 8, by our recently developed semi-automated fluorometric method. At pH 5 the organism extrudes EB without the need for metabolic energy (glucose), whereas at pH 8 extrusion of EB is dependent upon metabolic energy. Phe-Arg beta-naphtylamide (PAbetaN), a commonly assumed inhibitor of RND efflux pumps has no effect on the extrusion of EB as others claim. However, it does cause accumulation of EB. Competition between EB and PAbetaN was demonstrated and suggested that PAbetaN was preferentially extruded. A K(m) representing competition between PAbetaN and EB has been calculated. CONCLUSIONS/SIGNIFICANCE:The results suggest that E. coli has two general efflux systems (not to be confused with a distinct efflux pump) that are activated at low and high pH, respectively, and that the one at high pH is probably a putative ABC transporter coded by msbA, which has significant homology to the ABC transporter coded by efrAB of Enterococcus faecalis, an organism that faces similar challenges as it makes its way through the toxic intestinal system of the host
<i>Gaia</i> Data Release 1. Summary of the astrometric, photometric, and survey properties
Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7.
Aims. A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release.
Methods. The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue.
Results. Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the HIPPARCOS and Tycho-2 catalogues – a realisation of the Tycho-Gaia Astrometric Solution (TGAS) – and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of ∼3000 Cepheid and RR-Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr−1 for the proper motions. A systematic component of ∼0.3 mas should be added to the parallax uncertainties. For the subset of ∼94 000 HIPPARCOS stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr−1. For the secondary astrometric data set, the typical uncertainty of the positions is ∼10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to ∼0.03 mag over the magnitude range 5 to 20.7.
Conclusions. Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
Absolute luminosity measurements with the LHCb detector at the LHC
Absolute luminosity measurements are of general interest for colliding-beam
experiments at storage rings. These measurements are necessary to determine the
absolute cross-sections of reaction processes and are valuable to quantify the
performance of the accelerator. Using data taken in 2010, LHCb has applied two
methods to determine the absolute scale of its luminosity measurements for
proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In
addition to the classic "van der Meer scan" method a novel technique has been
developed which makes use of direct imaging of the individual beams using
beam-gas and beam-beam interactions. This beam imaging method is made possible
by the high resolution of the LHCb vertex detector and the close proximity of
the detector to the beams, and allows beam parameters such as positions, angles
and widths to be determined. The results of the two methods have comparable
precision and are in good agreement. Combining the two methods, an overall
precision of 3.5% in the absolute luminosity determination is reached. The
techniques used to transport the absolute luminosity calibration to the full
2010 data-taking period are presented.Comment: 48 pages, 19 figures. Results unchanged, improved clarity of Table 6,
9 and 10 and corresponding explanation in the tex
- …