Structural Functional Surface Design and Manufacture

The main purpose of this investigation was to explore the potential benefits of structural functional surfaces using facilities available within the University. The potential benefits were demonstrated by applying functional surfaces to a set of particular engineering applications. The thesis mainly concentrated on improving the frictional performance of a surface structure for hydrodynamic bearing application. This thesis has also included some preliminary investigation into drag-reducing riblet structures but this chapter mainly discusses the development of a novel experimental apparatus which is needed for precise boundary layer profile measurements and also to obtain the actual surface drag for each sample. To be able to assess these surfaces experimentally, they first, have to be manufactured. So, an extensive literature review of current manufacturing technologies was carried out. Each manufacturing method was ranked in its ability to cost-effectively produce surfaces with accuracy and repeatability also being considered. It was concluded that rolling, currently, has the best ability to structure large surface areas with the lowest costs associated. Other manufacturing methods, such as laser surface texturing, provide excellent repeatability and accuracy as well as the ability to create complex surface structures but is incredibly time-consuming for large surface areas. It was suggested that a hybrid of multiple manufacturing technologies would be incredibly useful for structuring surfaces. By combining rolling with more elaborate surface texturing methods (i.e. use a method such as LST to texture the roller surface), it is possible to amplify the productivity of less efficient methods, substantially. Before any journal components were textured, it was decided to test a batch of ground components. These components were finished with an abrasive tape process. The process parameters were varied for each sample and by doing this, a set of components with different roughness characteristics should have been obtained. The components were measured for 2D roughness parameters, 3D roughness parameters and surface energy. The components were tested on a tribometer apparatus in order to obtain a coefficient of friction (COF) for each sample. Correlation coefficients were then generated for the different surface measurements against COF, so that any strong correlations or trends could be identified. The idea was to try and obtain a reliable performance indicator (PI) so that frictional losses could be identified. It was found that the roughness parameters Sc (core void voume), Ssc (mean summit curvature) and Rku/Sku (profile/surface kurtosis) showed promise in the ability to predict the performance of a surface. The next stage was to texture the surface of the journal component. This would done by the application of the type III texturing grinding process, described by Stepien (Surface Engineering, 24: 219-225), to the cylindrical grinding process. Some initial components were manufactured and the textures generated were found to be of an ellipsoidal shape. In order to guarantee the benefits of such surfaces, the configuration of the surface pattern has to be optimised. A python script was developed during this investigation in order to automate a full modelling process. The computational fluid dynamics (CFD) modelling used a full 3D Navier-Stokes approximation. This script was used in conjunction with the Taguchi optimisation technique and a best surface configuration was found, resulting in a maximum surface drag reduction of 16.6% at a 3μm clearance. Further grinding trials were performed and the input parameters of the process were designed so that surface patterns were close to the recommendations of the optimisation process. The performance of the textured samples was impressive, with a maximum reduction in COF of 18.4% seen against a non-textured component with similar average roughness (Sa) value. Again, all components were measured for the aforementioned roughness parameters and surface energy. Sku continued to predict the best-performing component, showing promise as PI for both non-textured and textured samples

Catheter-related bacteremia due to Kocuria rosea in a patient undergoing peripheral blood stem cell transplantation

BACKGROUND: Micrococcus species may cause intracranial abscesses, meningitis, pneumonia, and septic arthritis in immunosuppressed or immunocompetent hosts. In addition, strains identified as Micrococcus spp. have been reported recently in infections associated with indwelling intravenous lines, continuous ambulatory peritoneal dialysis fluids, ventricular shunts and prosthetic valves. CASE PRESENTATION: We report on the first case of a catheter-related bacteremia caused by Kocuria rosea, a gram-positive microorganism belonging to the family Micrococcaceae, in a 39-year-old man undergoing peripheral blood stem cell transplantation due to relapsed Hodgkin disease. This uncommon pathogen may cause opportunistic infections in immunocompromised patients. CONCLUSIONS: This report presents a case of Kocuria rosea catheter related bacteremia after stem cell transplantation successfully treated with vancomycin and by catheter removal

Distinguishing post-treatment changes from recurrent disease in cholangiocarcinoma: a case report

<p>Abstract</p> <p>Introduction</p> <p>Three-dimensional techniques for radiotherapy have expanded possibilities for partial volume liver radiotherapy. Characteristic, transient radiographic changes can occur in the absence of clinical radiation-induced liver disease after hepatic radiotherapy and must be distinguished from local recurrence.</p> <p>Case presentation</p> <p>In this report, we describe computed tomography changes after chemoradiotherapy for cholangiocarcinoma as an example of collaboration to determine the clinical significance of the radiographic finding.</p> <p>Conclusion</p> <p>Because of improved three-dimensional, conformal radiotherapy techniques, consultation across disciplines may be necessary to interpret post-treatment imaging findings.</p

Radiobiological restrictions and tolerance doses of repeated single-fraction hdr-irradiation of intersecting small liver volumes for recurrent hepatic metastases

<p>Abstract</p> <p>Background</p> <p>To assess radiobiological restrictions and tolerance doses as well as other toxic effects derived from repeated applications of single-fraction high dose rate irradiation of small liver volumes in clinical practice.</p> <p>Methods</p> <p>Twenty patients with liver metastases were treated repeatedly (2 - 4 times) at identical or intersecting locations by CT-guided interstitial brachytherapy with varying time intervals. Magnetic resonance imaging using the hepatocyte selective contrast media Gd-BOPTA was performed before and after treatment to determine the volume of hepatocyte function loss (called pseudolesion), and the last acquired MRI data set was merged with the dose distributions of all administered brachytherapies. We calculated the BED (biologically equivalent dose for a single dose d = 2 Gy) for different α/β values (2, 3, 10, 20, 100) based on the linear-quadratic model and estimated the tolerance dose for liver parenchyma D₉₀as the BED exposing 90% of the pseudolesion in MRI.</p> <p>Results</p> <p>The tolerance doses D₉₀after repeated brachytherapy sessions were found between 22 - 24 Gy and proved only slightly dependent on α/β in the clinically relevant range of α/β = 2 - 10 Gy. Variance analysis showed a significant dependency of D₉₀with respect to the intervals between the first irradiation and the MRI control (p < 0.05), and to the number of interventions. In addition, we observed a significant inverse correlation (p = 0.037) between D₉₀and the pseudolesion's volume. No symptoms of liver dysfunction or other toxic effects such as abscess formation occurred during the follow-up time, neither acute nor on the long-term.</p> <p>Conclusions</p> <p>Inactivation of liver parenchyma occurs at a BED of approx. 22 - 24 Gy corresponding to a single dose of ~10 Gy (α/β ~ 5 Gy). This tolerance dose is consistent with the large potential to treat oligotopic and/or recurrent liver metastases by CT-guided HDR brachytherapy without radiation-induced liver disease (RILD). Repeated small volume irradiation may be applied safely within the limits of this study.</p

Search for new phenomena in final states with an energetic jet and large missing transverse momentum in pp collisions at √ s = 8 TeV with the ATLAS detector

Results of a search for new phenomena in final states with an energetic jet and large missing transverse momentum are reported. The search uses 20.3 fb−1 of √ s = 8 TeV data collected in 2012 with the ATLAS detector at the LHC. Events are required to have at least one jet with pT > 120 GeV and no leptons. Nine signal regions are considered with increasing missing transverse momentum requirements between Emiss T > 150 GeV and Emiss T > 700 GeV. Good agreement is observed between the number of events in data and Standard Model expectations. The results are translated into exclusion limits on models with either large extra spatial dimensions, pair production of weakly interacting dark matter candidates, or production of very light gravitinos in a gauge-mediated supersymmetric model. In addition, limits on the production of an invisibly decaying Higgs-like boson leading to similar topologies in the final state are presente

Transmission and control of Plasmodium knowlesi: a mathematical modelling study.

INTRODUCTION: Plasmodium knowlesi is now recognised as a leading cause of malaria in Malaysia. As humans come into increasing contact with the reservoir host (long-tailed macaques) as a consequence of deforestation, assessing the potential for a shift from zoonotic to sustained P. knowlesi transmission between humans is critical. METHODS: A multi-host, multi-site transmission model was developed, taking into account the three areas (forest, farm, and village) where transmission is thought to occur. Latin hypercube sampling of model parameters was used to identify parameter sets consistent with possible prevalence in macaques and humans inferred from observed data. We then explore the consequences of increasing human-macaque contact in the farm, the likely impact of rapid treatment, and the use of long-lasting insecticide-treated nets (LLINs) in preventing wider spread of this emerging infection. RESULTS: Identified model parameters were consistent with transmission being sustained by the macaques with spill over infections into the human population and with high overall basic reproduction numbers (up to 2267). The extent to which macaques forage in the farms had a non-linear relationship with human infection prevalence, the highest prevalence occurring when macaques forage in the farms but return frequently to the forest where they experience higher contact with vectors and hence sustain transmission. Only one of 1,046 parameter sets was consistent with sustained human-to-human transmission in the absence of macaques, although with a low human reproduction number (R(0H) = 1.04). Simulations showed LLINs and rapid treatment provide personal protection to humans with maximal estimated reductions in human prevalence of 42% and 95%, respectively. CONCLUSION: This model simulates conditions where P. knowlesi transmission may occur and the potential impact of control measures. Predictions suggest that conventional control measures are sufficient at reducing the risk of infection in humans, but they must be actively implemented if P. knowlesi is to be controlled

FOXO Regulates Organ-Specific Phenotypic Plasticity In Drosophila

Phenotypic plasticity, the ability for a single genotype to generate different phenotypes in response to environmental conditions, is biologically ubiquitous, and yet almost nothing is known of the developmental mechanisms that regulate the extent of a plastic response. In particular, it is unclear why some traits or individuals are highly sensitive to an environmental variable while other traits or individuals are less so. Here we elucidate the developmental mechanisms that regulate the expression of a particularly important form of phenotypic plasticity: the effect of developmental nutrition on organ size. In all animals, developmental nutrition is signaled to growing organs via the insulin-signaling pathway. Drosophila organs differ in their size response to developmental nutrition and this reflects differences in organ-specific insulin-sensitivity. We show that this variation in insulin-sensitivity is regulated at the level of the forkhead transcription factor FOXO, a negative growth regulator that is activated when nutrition and insulin signaling are low. Individual organs appear to attenuate growth suppression in response to low nutrition through an organ-specific reduction in FOXO expression, thereby reducing their nutritional plasticity. We show that FOXO expression is necessary to maintain organ-specific differences in nutritional-plasticity and insulin-sensitivity, while organ-autonomous changes in FOXO expression are sufficient to autonomously alter an organ's nutritional-plasticity and insulin-sensitivity. These data identify a gene (FOXO) that modulates a plastic response through variation in its expression. FOXO is recognized as a key player in the response of size, immunity, and longevity to changes in developmental nutrition, stress, and oxygen levels. FOXO may therefore act as a more general regulator of plasticity. These data indicate that the extent of phenotypic plasticity may be modified by changes in the expression of genes involved in signaling environmental information to developmental processes

Scrub typhus ecology: a systematic review of Orientia in vectors and hosts

Abstract Scrub typhus, caused by Orientia tsutsugamushi, is an important and neglected vector-borne zoonotic disease with an expanding known distribution. The ecology of the disease is complex and poorly understood, impairing discussion of public health interventions. To highlight what we know and the themes of our ignorance, we conducted a systematic review of all studies investigating the pathogen in vectors and non-human hosts. A total of 276 articles in 7 languages were included, with 793 study sites across 30 countries. There was no time restriction for article inclusion, with the oldest published in 1924. Seventy-six potential vector species and 234 vertebrate host species were tested, accounting for over one million trombiculid mites (‘chiggers’) and 83,000 vertebrates. The proportion of O. tsutsugamushi positivity was recorded for different categories of laboratory test and host species. Vector and host collection sites were geocoded and mapped. Ecological data associated with these sites were summarised. A further 145 articles encompassing general themes of scrub typhus ecology were reviewed. These topics range from the life-cycle to transmission, habitats, seasonality and human risks. Important gaps in our understanding are highlighted together with possible tools to begin to unravel these. Many of the data reported are highly variable and inconsistent and minimum data reporting standards are proposed. With more recent reports of human Orientia sp. infection in the Middle East and South America and enormous advances in research technology over recent decades, this comprehensive review provides a detailed summary of work investigating this pathogen in vectors and non-human hosts and updates current understanding of the complex ecology of scrub typhus. A better understanding of scrub typhus ecology has important relevance to ongoing research into improving diagnostics, developing vaccines and identifying useful public health interventions to reduce the burden of the disease.</jats:p