Determinación del Desbalance en Sistemas Rotor-cojinete a velocidad constante: Método de Identificación Algebraica

The development of a mathematical model for an on-line algebraic identifier is presented in this work. This model is used for determining the unbalance and its related angular position on vibrating rotor-dynamic systems of multiple degrees of freedom. The proposed identifier was obtained from the basis of a finite element mathematical model for rotating systems of multiple degrees of freedom. The model was developed under the consideration of four degrees of freedom beam-type element, where rotational inertia, gyroscopic moments, shearing strains and inner and outer damping effects were included. The on time behavior of proposed identifier was assessed for unbalance identification and its related angular position; the constant-speed unbalanced vibration response obtained from numerical simulation was used as input data

Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

Modal analysis of rotating machinery structures

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Energy absorption of single and multi-cell profiles under bending load considering damage evolution

In this paper, the energy absorption response of single and multi-cell profiles with different cross sections under bending load is presented. Emphasis was given to the modeling of damage initiation criteria and damage evolution. For this purpose, several discrete models of thin-walled structures were developed using Abaqus/Explicit. To obtain reliable results, a numerical study of a double-chambered profile under quasi-static three-point bending was conducted and validated experimentally. The studied structures included profiles with triangular, square, hexagonal, and circular cross-sectional shapes. The beams were fabricated with aluminum alloy EN AW-7108 T6 and modeled with ductile, shear, and Müschenborn-Sonne forming limit diagram damage initiation criteria. From the numerical results, both single and multi-cell profiles show an improvement in crashworthiness performance as their cross sections tend to approach a circle. In this way, an improvement of up to 80.95% in the crush force efficiency (CFE) parameter was obtained. Similarly, the introduction of ribs allowed for an increase in the energy absorption performance of the profiles relative to the single structure (non-ribbed). In this sense, an increase in specific energy absorption (SEA) and CFE values of up to 40% and 69% was calculated. Relative to single profiles, a maximum resistance to bending and an increase in energy absorption are observed when the circular cross section is reinforced in the longitudinal and transverse directions. Finally, with the improvements found, the design of an impact door beam used in the automobile industry is presented and discussed

Evaluation of a quality improvement intervention to reduce anastomotic leak following right colectomy (EAGLE): pragmatic, batched stepped-wedge, cluster-randomized trial in 64 countries

Background Anastomotic leak affects 8 per cent of patients after right colectomy with a 10-fold increased risk of postoperative death. The EAGLE study aimed to develop and test whether an international, standardized quality improvement intervention could reduce anastomotic leaks. Methods The internationally intended protocol, iteratively co-developed by a multistage Delphi process, comprised an online educational module introducing risk stratification, an intraoperative checklist, and harmonized surgical techniques. Clusters (hospital teams) were randomized to one of three arms with varied sequences of intervention/data collection by a derived stepped-wedge batch design (at least 18 hospital teams per batch). Patients were blinded to the study allocation. Low- and middle-income country enrolment was encouraged. The primary outcome (assessed by intention to treat) was anastomotic leak rate, and subgroup analyses by module completion (at least 80 per cent of surgeons, high engagement; less than 50 per cent, low engagement) were preplanned. Results A total 355 hospital teams registered, with 332 from 64 countries (39.2 per cent low and middle income) included in the final analysis. The online modules were completed by half of the surgeons (2143 of 4411). The primary analysis included 3039 of the 3268 patients recruited (206 patients had no anastomosis and 23 were lost to follow-up), with anastomotic leaks arising before and after the intervention in 10.1 and 9.6 per cent respectively (adjusted OR 0.87, 95 per cent c.i. 0.59 to 1.30; P = 0.498). The proportion of surgeons completing the educational modules was an influence: the leak rate decreased from 12.2 per cent (61 of 500) before intervention to 5.1 per cent (24 of 473) after intervention in high-engagement centres (adjusted OR 0.36, 0.20 to 0.64; P < 0.001), but this was not observed in low-engagement hospitals (8.3 per cent (59 of 714) and 13.8 per cent (61 of 443) respectively; adjusted OR 2.09, 1.31 to 3.31). Conclusion Completion of globally available digital training by engaged teams can alter anastomotic leak rates. Registration number: NCT04270721 (http://www.clinicaltrials.gov)

Searches for the ZγZ\gamma decay mode of the Higgs boson and for new high-mass resonances in pppp collisions at s=13\sqrt{s} = 13 TeV with the ATLAS detector

International audienceThis article presents searches for the Zγ decay of the Higgs boson and for narrow high-mass resonances decaying to Zγ, exploiting Z boson decays to pairs of electrons or muons. The data analysis uses 36.1 fb$^{−1}$ of pp collisions at $\sqrt{s}=13$ recorded by the ATLAS detector at the CERN Large Hadron Collider. The data are found to be consistent with the expected Standard Model background. The observed (expected — assuming Standard Model pp → H → Zγ production and decay) upper limit on the production cross section times the branching ratio for pp → H → Zγ is 6.6. (5.2) times the Standard Model prediction at the 95% confidence level for a Higgs boson mass of 125.09 GeV. In addition, upper limits are set on the production cross section times the branching ratio as a function of the mass of a narrow resonance between 250 GeV and 2.4 TeV, assuming spin-0 resonances produced via gluon-gluon fusion, and spin-2 resonances produced via gluon-gluon or quark-antiquark initial states. For high-mass spin-0 resonances, the observed (expected) limits vary between 88 fb (61 fb) and 2.8 fb (2.7 fb) for the mass range from 250 GeV to 2.4 TeV at the 95% confidence level

Search for direct top squark pair production in final states with two leptons in s=13\sqrt{s} = 13 TeV pppp collisions with the ATLAS detector

International audienceThe results of a search for direct pair production of top squarks in events with two opposite-charge leptons (electrons or muons) are reported, using $36.1~\hbox {fb}^{-1}$ of integrated luminosity from proton–proton collisions at $\sqrt{s}=13$ TeV collected by the ATLAS detector at the Large Hadron Collider. To cover a range of mass differences between the top squark $\tilde{t}$ and lighter supersymmetric particles, four possible decay modes of the top squark are targeted with dedicated selections: the decay $\tilde{t} \rightarrow b \tilde{\chi }_{1}^{\pm }$ into a b-quark and the lightest chargino with $\tilde{\chi }_{1}^{\pm } \rightarrow W \tilde{\chi }_{1}^{0}$ , the decay $\tilde{t} \rightarrow t \tilde{\chi }_{1}^{0}$ into an on-shell top quark and the lightest neutralino, the three-body decay $\tilde{t} \rightarrow b W \tilde{\chi }_{1}^{0}$ and the four-body decay $\tilde{t} \rightarrow b \ell \nu \tilde{\chi }_{1}^{0}$ . No significant excess of events is observed above the Standard Model background for any selection, and limits on top squarks are set as a function of the $\tilde{t}$ and $\tilde{\chi }_{1}^{0}$ masses. The results exclude at 95% confidence level $\tilde{t}$ masses up to about 720 GeV, extending the exclusion region of supersymmetric parameter space covered by previous searches

Measurements of ttˉt\bar{t} differential cross-sections of highly boosted top quarks decaying to all-hadronic final states in pppp collisions at s=13 \sqrt{s}=13\, TeV using the ATLAS detector

Measurements are made of differential cross-sections of highly boosted pair-produced top quarks as a function of top-quark and $t\bar{t}$ system kinematic observables using proton--proton collisions at a center-of-mass energy of $\sqrt{s} = 13$ TeV. The data set corresponds to an integrated luminosity of $36.1$ fb$^{-1}$, recorded in 2015 and 2016 with the ATLAS detector at the CERN Large Hadron Collider. Events with two large-radius jets in the final state, one with transverse momentum $p_{\rm T} > 500$ GeV and a second with $p_{\rm T}>350$ GeV, are used for the measurement. The top-quark candidates are separated from the multijet background using jet substructure information and association with a $b$-tagged jet. The measured spectra are corrected for detector effects to a particle-level fiducial phase space and a parton-level limited phase space, and are compared to several Monte Carlo simulations by means of calculated $\chi^2$ values. The cross-section for $t\bar{t}$ production in the fiducial phase-space region is $292 \pm 7 \ \rm{(stat)} \pm 76 \rm{(syst)}$ fb, to be compared to the theoretical prediction of $384 \pm 36$ fb