Waviness Affects Friction and Abrasive Wear

Abrasive wear can have a detrimental effect on machinery, especially in the mining and construction industries. To prolong machinery lifetime and cut down energy consumption, a thorough understanding of abrasive wear is essential: surface topography measurement and interpretation (including form, waviness, and roughness) are vitally important. However, the potentially crucial influence of surface topography intricacies on tribological behavior has been obscured since roughness and waviness are considered simple scalar quantities in most cases (e.g., roughness R$_{a}$ and waviness W$_{t}$). In this work, the complete waviness profile of the sliding track was used to shed light on the influence of surface topography on abrasive wear. Bearing steel (100Cr6, AISI 52100) pins and disks were tribologically tested in a flat-on-flat contact with Al$_{2}$O$_{3}$-based slurries as interfacial medium. Using slurries with two different particle sizes, 5 and 13 μm, we found that friction fluctuates only with small abrasive particles (5-µm slurry) and relatively low waviness disks. It was found that even small surface deviations (albeit minimized and controlled for) can significantly increase the friction coefficient—up to 91%. Remarkably, not only are frictional fluctuations strongly correlated with the disk’s initial waviness profile, but these small fluctuations correlate with unevenly distributed high wear. These findings enhance our understanding of the friction wear structure and provide the basis for exploring how surfaces can be optimized for better tribological performance

Managing FAIR Tribological Data Using Kadi4Mat

The ever-increasing amount of data generated from experiments and simulations in engineering sciences is relying more and more on data science applications to generate new knowledge. Comprehensive metadata descriptions and a suitable research data infrastructure are essential prerequisites for these tasks. Experimental tribology, in particular, presents some unique challenges in this regard due to the interdisciplinary nature of the field and the lack of existing standards. In this work, we demonstrate the versatility of the open source research data infrastructure Kadi4Mat by managing and producing FAIR tribological data. As a showcase example, a tribological experiment is conducted by an experimental group with a focus on comprehensiveness. The result is a FAIR data package containing all produced data as well as machine- and user-readable metadata. The close collaboration between tribologists and software developers shows a practical bottom-up approach and how such infrastructures are an essential part of our FAIR digital future

MetaCook: FAIR Vocabularies Cookbook

One of the prerequisites for FAIR data publication is the use of FAIR vocabularies. Currently, tools for the collaborative composition of such vocabularies are missing. For this reason, a universal manual and software for user-friendly vocabulary assembly is being composed in the HMC-funded MetaCook project. The project includes 4 separate test cases from 4 labs across KIT and Hereon, which will help strengthen the software\u27s universality and applicability to various domains. The components described in MetaCook will be implemented in the form of multiple software tools. The first one, a Python-based web application called VocPopuli, is the entry point for domain experts. The software, whose first version is being developed at the time of writing, enables the collaborative definition, and editing of metadata terms. Additionally, it annotates each term, as well as the entire vocabulary, with the help of the PROV Data Model (PROV-DM) - a schema used to describe the provenance of a given object. Finally, it assigns a unique ID to each term in the vocabulary, as well as a hash-based ID the vocabulary itself. The second software tool will facilitate the transformation of the vocabularies developed with the help of VocPopuli into ontologies. It will handle two distinct use cases – the from-scratch conversion of vocabularies into ontologies, and the augmentation of existing ontologies with the terms from a given thesaurus. Both software tools will be used by two semi-overlapping user groups: domain experts will input, edit, and discuss vocabulary terms in their area of interest, while vocabulary and ontology administrators will oversee the vocabulary creation, and ontology transformation. Both the controlled vocabularies and the corresponding ontologies offer the possibility to enrich data documented in Electronic Laboratory Notebooks (ELNs). As the simplest solution, terms used within the ELN are linked to the IDs of the related vocabulary and ontology for an unambiguous definition. Additionally, an export of the defined schemes can be used to automatically create a structured form in the ELNs for documenting the described processes. The output from the developed tools will be exemplarily integrated into the ELNs Herbie and Kadi4Mat

Generating FAIR research data in experimental tribology

Solutions for the generation of FAIR (Findable, Accessible, Interoperable, and Reusable) data and metadata in experimental tribology are currently lacking. Nonetheless, FAIR data production is a promising path for implementing scalable data science techniques in tribology, which can lead to a deeper understanding of the phenomena that govern friction and wear. Missing community-wide data standards, and the reliance on custom workflows and equipment are some of the main challenges when it comes to adopting FAIR data practices. This paper, first, outlines a sample framework for scalable generation of FAIR data, and second, delivers a showcase FAIR data package for a pin-on-disk tribological experiment. The resulting curated data, consisting of 2,008 key-value pairs and 1,696 logical axioms, is the result of (1) the close collaboration with developers of a virtual research environment, (2) crowd-sourced controlled vocabulary, (3) ontology building, and (4) numerous – seemingly – small-scale digital tools. Thereby, this paper demonstrates a collection of scalable non-intrusive techniques that extend the life, reliability, and reusability of experimental tribological data beyond typical publication practices

Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

Differential cross section measurements for the production of a W boson in association with jets in proton–proton collisions at √s = 7 TeV

Measurements are reported of differential cross sections for the production of a W boson, which decays into a muon and a neutrino, in association with jets, as a function of several variables, including the transverse momenta (pT) and pseudorapidities of the four leading jets, the scalar sum of jet transverse momenta (HT), and the difference in azimuthal angle between the directions of each jet and the muon. The data sample of pp collisions at a centre-of-mass energy of 7 TeV was collected with the CMS detector at the LHC and corresponds to an integrated luminosity of 5.0 fb[superscript −1]. The measured cross sections are compared to predictions from Monte Carlo generators, MadGraph + pythia and sherpa, and to next-to-leading-order calculations from BlackHat + sherpa. The differential cross sections are found to be in agreement with the predictions, apart from the pT distributions of the leading jets at high pT values, the distributions of the HT at high-HT and low jet multiplicity, and the distribution of the difference in azimuthal angle between the leading jet and the muon at low values.United States. Dept. of EnergyNational Science Foundation (U.S.)Alfred P. Sloan Foundatio

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Search for stop and higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass

Impacts of the Tropical Pacific/Indian Oceans on the Seasonal Cycle of the West African Monsoon

The current consensus is that drought has developed in the Sahel during the second half of the twentieth century as a result of remote effects of oceanic anomalies amplified by local land–atmosphere interactions. This paper focuses on the impacts of oceanic anomalies upon West African climate and specifically aims to identify those from SST anomalies in the Pacific/Indian Oceans during spring and summer seasons, when they were significant. Idealized sensitivity experiments are performed with four atmospheric general circulation models (AGCMs). The prescribed SST patterns used in the AGCMs are based on the leading mode of covariability between SST anomalies over the Pacific/Indian Oceans and summer rainfall over West Africa. The results show that such oceanic anomalies in the Pacific/Indian Ocean lead to a northward shift of an anomalous dry belt from the Gulf of Guinea to the Sahel as the season advances. In the Sahel, the magnitude of rainfall anomalies is comparable to that obtained by other authors using SST anomalies confined to the proximity of the Atlantic Ocean. The mechanism connecting the Pacific/Indian SST anomalies with West African rainfall has a strong seasonal cycle. In spring (May and June), anomalous subsidence develops over both the Maritime Continent and the equatorial Atlantic in response to the enhanced equatorial heating. Precipitation increases over continental West Africa in association with stronger zonal convergence of moisture. In addition, precipitation decreases over the Gulf of Guinea. During the monsoon peak (July and August), the SST anomalies move westward over the equatorial Pacific and the two regions where subsidence occurred earlier in the seasons merge over West Africa. The monsoon weakens and rainfall decreases over the Sahel, especially in August.Peer reviewe