14 research outputs found

    Contamination assessment of heavy metals in agricultural soil, in the liwa area (UAE)

    Get PDF
    The Liwa area is a primary food production area in the United Arab Emirates (UAE) and has intensively been used for agriculture. This study investigates the pollution levels with heavy metals in agricultural soils from the Liwa area. Thirty-two soil samples were analyzed for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As. Results revealed that heavy metal levels varied in the ranges 220.02– 311.21, 42.39–66.92, 43.43–71.55, 32.86–52.12, 10.29–21.70, 2.83–8.84, 0.46–0.69, 0.03–0.37 mg/kg for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As, respectively. All samples presented low As concentrations with an average of 0.01 mg/kg. The variations in bulk metal contents in the soil samples were related to multiple sources, including agrochemicals, atmospheric dust containing heavy metals, and traf-fic-related metals. Enrichment factor analysis indicates that Cd, Ni, Zn, and Cr were highly enriched in soils, and they could originate from non-crustal sources. Based on the geo-accumulation index (Igeo), the soil samples appeared uncontaminated with Mn, Cr, Zn, Pb, Co, As, Cu, uncontaminated to moderately contaminated with Ni and moderately contaminated with Cd. The contamination factors suggest low contamination, except for Ni, which showed moderate contamination. The average pollution load index (PLI) revealed unpolluted to low pollution of all soil samples. The ecological risk assessment (PERI) showed that all heavy metals posed a low risk, except for Cd which exhibited a high ecological risk

    Study of atmospheric pollution and health risk assessment: A case study for the sharjah and ajman emirates (uae)

    Get PDF
    Dust is a significant pollution source in the United Arab Emirates (UAE) that impacts population health. Therefore, the present study aims to determine the concentration of heavy metals (Cd, Pb, Cr, Cu, Ni, and Zn) in the air in the Sharjah and Ajman emirates’ urban areas and assesses the health risk. Three indicators were used for this purpose: the average daily dose (ADD), the hazard quotient (HQ), and the health index (HI). Data were collected during the period April–August 2020. Moreover, the observation sites were clustered based on the pollutants’ concentration, given that the greater the heavy metal concentration is, the greater is the risk for the population health. The most abundant heavy metal found in the atmosphere was Zn, with a mean concentration of 160.30 mg/kg, the concentrations of other metals being in the following order: Ni \u3e Cr \u3e Cu \u3e Pb \u3e Cd. The mean concentrations of Cd, Pb, and Cr were within the range of background values, while those of Cu, Ni, and Zn were higher than the background values, indicating anthropogenic pollution. For adults, the mean ADD values of heavy metals decreased from Zn to Cd (Zn \u3e Ni \u3e Cr \u3e Cu \u3e Pb \u3e Cd). The HQ (HI) suggested an acceptable (negligible) level of non-carcinogenic harmful health risk to residents’ health. The sites were grouped in three clusters, one of them containing a single location, where the highest concentrations of heavy metals were found

    Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

    Measurement of jet fragmentation in Pb+Pb and pppp collisions at sNN=2.76\sqrt{{s_\mathrm{NN}}} = 2.76 TeV with the ATLAS detector at the LHC

    Get PDF

    Assessing the Water Pollution of the Brahmaputra River Using Water Quality Indexes

    No full text
    Water quality is continuously affected by anthropogenic and environmental conditions. A significant issue of the Indian rivers is the massive water pollution, leading to the spreading of different diseases due to its daily use. Therefore, this study investigates three aspects. The first one is testing the hypothesis of the existence of a monotonic trend of the series of eight water parameters of the Brahmaputra River recorded for 17 years at ten hydrological stations. When this hypothesis was rejected, a loess trend was fitted. The second aspect is to assess the water quality using three indicators (WQI)–CCME WQI, British Colombia, and a weighted index. The third aspect is to group the years and the stations in clusters used to determine the regional (spatial) and temporal trend of the WQI series, utilizing a new algorithm. A statistical analysis does not reject the hypothesis of a monotonic trend presence for the spatially distributed data but not for the temporal ones. Hierarchical clustering based on the computed WQIs detected two clusters for the spatially distributed data and two for the temporal-distributed data. The procedure proposed for determining the WQI temporal and regional evolution provided good results in terms of mean absolute error, root mean squared error (RMSE), and mean absolute percentage error (MAPE)

    Assessing the Water Pollution of the Brahmaputra River Using Water Quality Indexes

    No full text
    Water quality is continuously affected by anthropogenic and environmental conditions. A significant issue of the Indian rivers is the massive water pollution, leading to the spreading of different diseases due to its daily use. Therefore, this study investigates three aspects. The first one is testing the hypothesis of the existence of a monotonic trend of the series of eight water parameters of the Brahmaputra River recorded for 17 years at ten hydrological stations. When this hypothesis was rejected, a loess trend was fitted. The second aspect is to assess the water quality using three indicators (WQI)–CCME WQI, British Colombia, and a weighted index. The third aspect is to group the years and the stations in clusters used to determine the regional (spatial) and temporal trend of the WQI series, utilizing a new algorithm. A statistical analysis does not reject the hypothesis of a monotonic trend presence for the spatially distributed data but not for the temporal ones. Hierarchical clustering based on the computed WQIs detected two clusters for the spatially distributed data and two for the temporal-distributed data. The procedure proposed for determining the WQI temporal and regional evolution provided good results in terms of mean absolute error, root mean squared error (RMSE), and mean absolute percentage error (MAPE)

    Contamination Assessment of Heavy Metals in Agricultural Soil, in the Liwa Area (UAE)

    No full text
    The Liwa area is a primary food production area in the United Arab Emirates (UAE) and has intensively been used for agriculture. This study investigates the pollution levels with heavy metals in agricultural soils from the Liwa area. Thirty-two soil samples were analyzed for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As. Results revealed that heavy metal levels varied in the ranges 220.02–311.21, 42.39–66.92, 43.43–71.55, 32.86–52.12, 10.29–21.70, 2.83–8.84, 0.46–0.69, 0.03–0.37 mg/kg for Mn, Zn, Cr, Ni, Cu, Pb, Cd, Co, and As, respectively. All samples presented low As concentrations with an average of 0.01 mg/kg. The variations in bulk metal contents in the soil samples were related to multiple sources, including agrochemicals, atmospheric dust containing heavy metals, and traffic-related metals. Enrichment factor analysis indicates that Cd, Ni, Zn, and Cr were highly enriched in soils, and they could originate from non-crustal sources. Based on the geo-accumulation index (Igeo), the soil samples appeared uncontaminated with Mn, Cr, Zn, Pb, Co, As, Cu, uncontaminated to moderately contaminated with Ni and moderately contaminated with Cd. The contamination factors suggest low contamination, except for Ni, which showed moderate contamination. The average pollution load index (PLI) revealed unpolluted to low pollution of all soil samples. The ecological risk assessment (PERI) showed that all heavy metals posed a low risk, except for Cd which exhibited a high ecological risk

    Search for direct top squark pair production in final states with two leptons in s=13\sqrt{s} = 13 TeV pppp collisions with the ATLAS detector

    No full text
    International audienceThe results of a search for direct pair production of top squarks in events with two opposite-charge leptons (electrons or muons) are reported, using 36.1 fb136.1~\hbox {fb}^{-1} of integrated luminosity from proton–proton collisions at s=13\sqrt{s}=13 TeV collected by the ATLAS detector at the Large Hadron Collider. To cover a range of mass differences between the top squark t~\tilde{t} and lighter supersymmetric particles, four possible decay modes of the top squark are targeted with dedicated selections: the decay t~bχ~1±\tilde{t} \rightarrow b \tilde{\chi }_{1}^{\pm } into a b-quark and the lightest chargino with χ~1±Wχ~10\tilde{\chi }_{1}^{\pm } \rightarrow W \tilde{\chi }_{1}^{0} , the decay t~tχ~10\tilde{t} \rightarrow t \tilde{\chi }_{1}^{0} into an on-shell top quark and the lightest neutralino, the three-body decay t~bWχ~10\tilde{t} \rightarrow b W \tilde{\chi }_{1}^{0} and the four-body decay t~bνχ~10\tilde{t} \rightarrow b \ell \nu \tilde{\chi }_{1}^{0} . No significant excess of events is observed above the Standard Model background for any selection, and limits on top squarks are set as a function of the t~\tilde{t} and χ~10\tilde{\chi }_{1}^{0} masses. The results exclude at 95% confidence level t~\tilde{t} masses up to about 720 GeV, extending the exclusion region of supersymmetric parameter space covered by previous searches

    Study of the material of the ATLAS inner detector for Run 2 of the LHC

    No full text
    International audienceThe ATLAS inner detector comprises three different sub-detectors: the pixel detector, the silicon strip tracker, and the transition-radiation drift-tube tracker. The Insertable B-Layer, a new innermost pixel layer, was installed during the shutdown period in 2014, together with modifications to the layout of the cables and support structures of the existing pixel detector. The material in the inner detector is studied with several methods, using a low-luminosity √s=13 TeV pp collision sample corresponding to around 2.0 nb−1 collected in 2015 with the ATLAS experiment at the LHC. In this paper, the material within the innermost barrel region is studied using reconstructed hadronic interaction and photon conversion vertices. For the forward rapidity region, the material is probed by a measurement of the efficiency with which single tracks reconstructed from pixel detector hits alone can be extended with hits on the track in the strip layers. The results of these studies have been taken into account in an improved description of the material in the ATLAS inner detector simulation, resulting in a reduction in the uncertainties associated with the charged-particle reconstruction efficiency determined from simulation

    Searches for the ZγZ\gamma decay mode of the Higgs boson and for new high-mass resonances in pppp collisions at s=13\sqrt{s} = 13 TeV with the ATLAS detector

    No full text
    International audienceThis article presents searches for the Zγ decay of the Higgs boson and for narrow high-mass resonances decaying to Zγ, exploiting Z boson decays to pairs of electrons or muons. The data analysis uses 36.1 fb1^{−1} of pp collisions at s=13 \sqrt{s}=13 recorded by the ATLAS detector at the CERN Large Hadron Collider. The data are found to be consistent with the expected Standard Model background. The observed (expected — assuming Standard Model pp → H → Zγ production and decay) upper limit on the production cross section times the branching ratio for pp → H → Zγ is 6.6. (5.2) times the Standard Model prediction at the 95% confidence level for a Higgs boson mass of 125.09 GeV. In addition, upper limits are set on the production cross section times the branching ratio as a function of the mass of a narrow resonance between 250 GeV and 2.4 TeV, assuming spin-0 resonances produced via gluon-gluon fusion, and spin-2 resonances produced via gluon-gluon or quark-antiquark initial states. For high-mass spin-0 resonances, the observed (expected) limits vary between 88 fb (61 fb) and 2.8 fb (2.7 fb) for the mass range from 250 GeV to 2.4 TeV at the 95% confidence level
    corecore