Development and Validation of a New Bitumen Fume Generation System which Generates Polycyclic Aromatic Hydrocarbon Concentrations Proportional to Fume Concentrations

Bitumen fumes emitted during road paving and roofing contain polycyclic aromatic compounds (PACs) of potential health concern. Little information is available for an experimental device devoted to inhalation experiments with animals exposed to bitumen fumes, and in all studies the systems were never validated for a range of fume concentrations, which prohibited their use for toxicological concentration-effect studies. Therefore, the purpose of this study was to validate a new experimental device able to generate bitumen fumes at different total particulate matter (TPM) concentrations with a linear correlation between TPM and the concentrations of different PACs, thus allowing toxicological dose-response studies with fumes representative of those in the field. Atmosphere samples collected from an animal exposure chamber allowed the determination of TPM, toluene soluble matter, polycyclic aromatic hydrocarbons (PAHs) and semi-volatiles. The particulate size distributions were determined in order to assess the deposition pattern in the respiratory tract. The temperature of 170°C was chosen by analogy with the upper range of the temperature used during paving operations. The temperature of the air passing over the fume emission area was regulated to 20°C and stirring of the heated bitumen was restricted to 90 r.p.m. The data show that the objective of developing a static fume generation system that reproducibly produces fumes in the inhalation chamber for specified target concentrations (TPM) were successful. The within-day variation coefficients for TPM were between 2.5 and 6.1%. The day-to-day variations for TPM concentration were between 4.1 and 5.8%. The concentrations of the 4-5 ring PAHs and the polycyclic aromatic sulphur heterocycles were proportional to the TPM concentration. The 2 and 3 ring PAH concentrations showed a deviation from proportionality with the TPM, probably due to their re-evaporation during sampling. The mass median aerodynamic diameter of airborne particles varied from 1.4 µm at a fume concentration of 5 mg/m3 to 3.2 µm at 100 mg/m3. In conclusion, this equipment was suitable for nose-only inhalation studies in the 5-100 mg/m3 range of TPM. Bitumen fumes were generated with a good reproducibility under well-controlled conditions. Finally, the PAH profiles from atmospheric samples were in good agreement with those measured during road pavin

Precision Measurement of the Neutron Spin Asymmetry A1nA_1^n and Spin-Flavor Decomposition in the Valence Quark Region

We have measured the neutron spin asymmetry $A_1^n$ with high precision at three kinematics in the deep inelastic region at $x=0.33$, 0.47 and 0.60, and $Q^2=2.7$, 3.5 and 4.8 (GeV/c)$^2$, respectively. Our results unambiguously show, for the first time, that $A_1^n$ crosses zero around $x=0.47$ and becomes significantly positive at $x=0.60$. Combined with the world proton data, polarized quark distributions were extracted. Our results, in general, agree with relativistic constituent quark models and with perturbative quantum chromodynamics (pQCD) analyses based on the earlier data. However they deviate from pQCD predictions based on hadron helicity conservation.Comment: 5 pages, 2 figures, this is the final version appeared in Phys. Rev. Let

Harmonic Sums and Mellin Transforms up to two-loop Order

A systematic study is performed on the finite harmonic sums up to level four. These sums form the general basis for the Mellin transforms of all individual functions $f_i(x)$ of the momentum fraction $x$ emerging in the quantities of massless QED and QCD up to two--loop order, as the unpolarized and polarized splitting functions, coefficient functions, and hard scattering cross sections for space and time-like momentum transfer. The finite harmonic sums are calculated explicitly in the linear representation. Algebraic relations connecting these sums are derived to obtain representations based on a reduced set of basic functions. The Mellin transforms of all the corresponding Nielsen functions are calculated.Comment: 44 pages Latex, contract number adde

The threshold hypothesis revisited: bilingual lexical knowledge and non-verbal IQ development

The threshold hypothesis (Cummins 1976 et passim) is one of the most influential theoretical frameworks on the relation between bilingualism and cognition. The aim of our study is to contribute towards an operationalisation of the threshold hypothesis. We analyse data from 100 Turkish-English successive bilingual children and from their parents, and investigate the relation between bilingualism and cognition. When compared with monolingual control groups, the bilinguals in our study have smaller vocabulary sizes in both languages. However, when both vocabularies are taken together and the total conceptual vocabulary is computed no bilingual disadvantage can be identified. Children with parental support for L1 outperform the monolingual control groups in our study in terms of non-verbal intelligence scores. The originality of the present study resides in the fact that, to our knowledge, for the first time parental support for L1 and dominance in L1 is linked to the cognitive development of the children

Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

Precision Measurement of the Neutron Spin Asymmetries and Spin-dependent Structure Functions in the Valence Quark Region

We report on measurements of the neutron spin asymmetries $A_{1,2}^n$ and polarized structure functions $g_{1,2}^n$ at three kinematics in the deep inelastic region, with $x=0.33$, 0.47 and 0.60 and $Q^2=2.7$, 3.5 and 4.8 (GeV/c)$^2$, respectively. These measurements were performed using a 5.7 GeV longitudinally-polarized electron beam and a polarized $^3$He target. The results for $A_1^n$ and $g_1^n$ at $x=0.33$ are consistent with previous world data and, at the two higher $x$ points, have improved the precision of the world data by about an order of magnitude. The new $A_1^n$ data show a zero crossing around $x=0.47$ and the value at $x=0.60$ is significantly positive. These results agree with a next-to-leading order QCD analysis of previous world data. The trend of data at high $x$ agrees with constituent quark model predictions but disagrees with that from leading-order perturbative QCD (pQCD) assuming hadron helicity conservation. Results for $A_2^n$ and $g_2^n$ have a precision comparable to the best world data in this kinematic region. Combined with previous world data, the moment $d_2^n$ was evaluated and the new result has improved the precision of this quantity by about a factor of two. When combined with the world proton data, polarized quark distribution functions were extracted from the new $g_1^n/F_1^n$ values based on the quark parton model. While results for $\Delta u/u$ agree well with predictions from various models, results for $\Delta d/d$ disagree with the leading-order pQCD prediction when hadron helicity conservation is imposed.Comment: A typing error in A_\parallel(3He) at x=0.47 in Table VII of Phys. Rev. C has been noticed and correcte

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Measurement of the top quark pair cross section with ATLAS in pp collisions at √s=7 TeV using final states with an electron or a muon and a hadronically decaying τ lepton

A measurement of the cross section of top quark pair production in proton-proton collisions recorded with the ATLAS detector at the Large Hadron Collider at a centre-of-mass energy of 7 TeV is reported. The data sample used corresponds to an integrated luminosity of 2.05 fb -1. Events with an isolated electron or muon and a τ lepton decaying hadronically are used. In addition, a large missing transverse momentum and two or more energetic jets are required. At least one of the jets must be identified as originating from a b quark. The measured cross section, σtt-=186±13(stat.)±20(syst.)±7(lumi.) pb, is in good agreement with the Standard Model prediction

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde