Metal Layer Architectures for 2D TMD Heterostructures

Two-dimensional transition metal dichalcogenides (TMDs) are of interest because of their potential for use in transistors and sensors due to their unique electronic and optical properties, coupled with mechanical flexibility. The band gaps of TMDs differ depending on the transition metal and dichalcogenide, the thickness of the TMD, and the structure of the TMD. To be able to tune the electronic and optical properties of TMDs, thin transition metal layers of molybdenum, tungsten, and rhenium were deposited on a silicon substrate with a 200nm oxide layer using a magnetron sputtering chamber. The film thickness and structure, surface characteristics, and conductivity were measured using atomic force microscopy, scanning electron microscopy, and a voltmeter, respectively. The thin transition metal films were then sent to collaborators to be exposed to sulfur or selenium to form TMDs. The TMD heterostructure will then be characterized using an AFM, SEM and Raman Spectroscopy. Then, transition metal bilayers were formed by sequentially depositing the transition metals on the silicon substrate with a 200nm oxide layer using a magnetron sputtering chamber. The film characteristics were then determined using the same methods as the single transition metal layer. The transition metal bilayers were then sent to collaborators to be exposed to sulfur or selenium to form TMDs. The bilayer TMD heterostructure will then be characterized using an AFM, SEM and Raman Spectroscopy and its optical and electronic properties will be characterized. Specifically, the electronic band gap will be evaluated and compared to the values for the monolithic monolayers. By varying the order of TMD layers, semiconductors with different band gaps will be able to be produced. This would allow for greater tailorability of the TMD semiconductors for use in applications such as flexible transistors and molecular sensors

Numerical simulation of explosive volcanic eruptions from the conduit flow to global atmospheric scales

Volcanic eruptions are unsteady multiphase phenomena, which encompass many inter-related processes across the whole range of scales from molecular and microscopic to macroscopic, synoptic and global. We provide an overview of recent advances in numerical modelling of volcanic effects, from conduit and eruption column processes to those on the Earth s climate. Conduit flow models examine ascent dynamics and multiphase processes like fragmentation, chemical reactions and mass transfer below the Earth surface. Other models simulate atmospheric dispersal of the erupted gas-particle mixture, focusing on rapid processes occurring in the jet, the lower convective regions, and pyroclastic density currents. The ascending eruption column and intrusive gravity current generated by it, as well as sedimentation and ash dispersal from those flows in the immediate environment of the volcano are examined with modular and generic models. These apply simplifications to the equations describing the system depending on the specific focus of scrutiny. The atmospheric dispersion of volcanic clouds is simulated by ash tracking models. These are inadequate for the first hours of spreading in many cases but focus on long-range prediction of ash location to prevent hazardous aircraft - ash encounters. The climate impact is investigated with global models. All processes and effects of explosive eruptions cannot be simulated by a single model, due to the complexity and hugely contrasting spatial and temporal scales involved. There is now the opportunity to establish a closer integration between different models and to develop the first comprehensive description of explosive eruptions and of their effects on the ground, in the atmosphere, and on the global climate

Laser writing of electronic circuitry in thin film molybdenum disulfide: A transformative manufacturing approach

Electronic circuits, the backbone of modern electronic devices, require precise integration of conducting, insulating, and semiconducting materials in two- and three-dimensional space to control the flow of electric current. Alternative strategies to pattern these materials outside of a cleanroom environment, such as additive manufacturing, have enabled rapid prototyping and eliminated design constraints imposed by traditional fabrication. In this work, a transformative manufacturing approach using laser processing is implemented to directly realize conducting, insulating, and semiconducting phases within an amorphous molybdenum disulfide thin film precursor. This is achieved by varying the incident visible (514 nm) laser intensity and raster-scanning the thin film a-MoS2 sample (900 nm thick) at different speeds for micro-scale control of the crystallization and reaction kinetics. The overall result is the transformation of select regions of the a-MoS2 film into MoO2, MoO3, and 2H-MoS2 phases, exhibiting conducting, insulating, and semiconducting properties, respectively. A mechanism for this precursor transformation based on crystallization and oxidation is developed using a thermal model paired with a description of the reaction kinetics. Finally, by engineering the architecture of the three crystalline phases, electrical devices such as a resistor, capacitor, and chemical sensor were laser-written directly within the precursor film, representing an entirely transformative manufacturing approach for the fabrication of electronic circuitry

The Toronto prehospital hypertonic resuscitation-head injury and multi organ dysfunction trial (TOPHR HIT) - Methods and data collection tools

<p>Abstract</p> <p>Background</p> <p>Clinical trials evaluating the use of hypertonic saline in the treatment of hypovolemia and head trauma suggest no survival superiority over normal saline; however subgroup analyses suggest there may be a reduction in the inflammatory response and multiorgan failure which may lead to better survival and enhanced neurocognitive function. We describe a feasibility study of randomizing head injured patients to hypertonic saline and dextran vs. normal saline administration in the out of hospital setting.</p> <p>Methods/Design</p> <p>This feasibility study employs a randomized, placebo-controlled design evaluating normal saline compared with a single dose of 250 ml of 7.5% hypertonic saline in 6% dextran 70 in the management of traumatic brain injuries. The primary feasibility endpoints of the trial were: 1) baseline survival rates for the treatment and control group to aid in the design of a definitive multicentre trial, 2) randomization compliance rate, 3) ease of protocol implementation in the out-of-hospital setting, and 4) adverse event rate of HSD infusion.</p> <p>The secondary objectives include measuring the effect of HSD in modulating the immuno-inflammatory response to severe head injury and its effect on modulating the release of neuro-biomarkers into serum; evaluating the role of serum neuro-biomarkers in predicting patient outcome and clinical response to HSD intervention; evaluating effects of HSD on brain atrophy post-injury and neurocognitive and neuropsychological outcomes.</p> <p>Discussion</p> <p>We anticipate three aspects of the trial will present challenges to trial success; ethical demands associated with a waiver of consent trial, challenging follow up and comprehensive accurate timely data collection of patient identifiers and clinical or laboratory values. In addition all the data collection tools had to be derived de novo as none existed in the literature.</p> <p>Trial registration number</p> <p>NCT00878631</p

Effects of acute tryptophan depletion on executive function in healthy male volunteers

BACKGROUND: Neurocognitive impairment is frequently described in a number of psychiatric disorders and may be a direct consequence of serotonergic dysfunction. As impairments in executive functions are some of the most frequently described, the purpose of this study was to examine the performance of normal volunteers on a range of executive tasks following a transient reduction of central serotonin (5-HT) levels using the method of acute tryptophan depletion (ATD). METHODS: Fifteen healthy male subjects participated in a within-subject, double-blind, counterbalanced crossover study. ATD was induced by ingestion of a 100 g amino-acid drink. Executive function was evaluated using the Wisconsin Card Sorting Test, Stroop, Verbal Fluency and Trail Making. Visual analogue scales were administered to assess mood. RESULTS: Plasma free and total tryptophan concentrations were significantly reduced by the depleting drink (P < 0.001). ATD selectively improved motor speed/ attention on the Trails A test (P = 0.027), with no effect on subjective ratings of mood. Interaction effects between drink and the order of drink administration were observed on most neurocognitive tests. CONCLUSIONS: The improvement in simple motor speed/ attention following ATD is in keeping with the ascribed role of 5-HT in the cortex, however performance on tests of executive function is not robustly altered. The presence of interaction effects on most tasks suggests that subtle changes may occur but are masked, possibly by simple learning effects, in the context of a crossover design. This has implications for the design of future studies, particularly those examining executive functions

Формирование эмоциональной культуры как компонента инновационной культуры студентов

Homozygosity has long been associated with rare, often devastating, Mendelian disorders1 and Darwin was one of the first to recognise that inbreeding reduces evolutionary fitness2. However, the effect of the more distant parental relatedness common in modern human populations is less well understood. Genomic data now allow us to investigate the effects of homozygosity on traits of public health importance by observing contiguous homozygous segments (runs of homozygosity, ROH), which are inferred to be homozygous along their complete length. Given the low levels of genome-wide homozygosity prevalent in most human populations, information is required on very large numbers of people to provide sufficient power3,4. Here we use ROH to study 16 health-related quantitative traits in 354,224 individuals from 102 cohorts and find statistically significant associations between summed runs of homozygosity (SROH) and four complex traits: height, forced expiratory lung volume in 1 second (FEV1), general cognitive ability (g) and educational attainment (nominal p<1 × 10−300, 2.1 × 10−6, 2.5 × 10−10, 1.8 × 10−10). In each case increased homozygosity was associated with decreased trait value, equivalent to the offspring of first cousins being 1.2 cm shorter and having 10 months less education. Similar effect sizes were found across four continental groups and populations with different degrees of genome-wide homozygosity, providing convincing evidence for the first time that homozygosity, rather than confounding, directly contributes to phenotypic variance. Contrary to earlier reports in substantially smaller samples5,6, no evidence was seen of an influence of genome-wide homozygosity on blood pressure and low density lipoprotein (LDL) cholesterol, or ten other cardio-metabolic traits. Since directional dominance is predicted for traits under directional evolutionary selection7, this study provides evidence that increased stature and cognitive function have been positively selected in human evolution, whereas many important risk factors for late-onset complex diseases may not have been

Consensus guidelines for the use and interpretation of angiogenesis assays

The formation of new blood vessels, or angiogenesis, is a complex process that plays important roles in growth and development, tissue and organ regeneration, as well as numerous pathological conditions. Angiogenesis undergoes multiple discrete steps that can be individually evaluated and quantified by a large number of bioassays. These independent assessments hold advantages but also have limitations. This article describes in vivo, ex vivo, and in vitro bioassays that are available for the evaluation of angiogenesis and highlights critical aspects that are relevant for their execution and proper interpretation. As such, this collaborative work is the first edition of consensus guidelines on angiogenesis bioassays to serve for current and future reference

Community prevalence of SARS-CoV-2 in England from April to November, 2020: results from the ONS Coronavirus Infection Survey

Background: Decisions about the continued need for control measures to contain the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) rely on accurate and up-to-date information about the number of people testing positive for SARS-CoV-2 and risk factors for testing positive. Existing surveillance systems are generally not based on population samples and are not longitudinal in design. Methods: Samples were collected from individuals aged 2 years and older living in private households in England that were randomly selected from address lists and previous Office for National Statistics surveys in repeated crosssectional household surveys with additional serial sampling and longitudinal follow-up. Participants completed a questionnaire and did nose and throat self-swabs. The percentage of individuals testing positive for SARS-CoV-2 RNA was estimated over time by use of dynamic multilevel regression and poststratification, to account for potential residual non-representativeness. Potential changes in risk factors for testing positive over time were also assessed. The study is registered with the ISRCTN Registry, ISRCTN21086382. Findings: Between April 26 and Nov 1, 2020, results were available from 1 191 170 samples from 280327 individuals; 5231 samples were positive overall, from 3923 individuals. The percentage of people testing positive for SARS-CoV-2 changed substantially over time, with an initial decrease between April 26 and June 28, 2020, from 0·40% (95% credible interval 0·29–0·54) to 0·06% (0·04–0·07), followed by low levels during July and August, 2020, before substantial increases at the end of August, 2020, with percentages testing positive above 1% from the end of October, 2020. Having a patient facing role and working outside your home were important risk factors for testing positive for SARS-CoV-2 at the end of the first wave (April 26 to June 28, 2020), but not in the second wave (from the end of August to Nov 1, 2020). Age (young adults, particularly those aged 17–24 years) was an important initial driver of increased positivity rates in the second wave. For example, the estimated percentage of individuals testing positive was more than six times higher in those aged 17–24 years than in those aged 70 years or older at the end of September, 2020. A substantial proportion of infections were in individuals not reporting symptoms around their positive test (45–68%, dependent on calendar time. Interpretation: Important risk factors for testing positive for SARS-CoV-2 varied substantially between the part of the first wave that was captured by the study (April to June, 2020) and the first part of the second wave of increased positivity rates (end of August to Nov 1, 2020), and a substantial proportion of infections were in individuals not reporting symptoms, indicating that continued monitoring for SARS-CoV-2 in the community will be important for managing the COVID-19 pandemic moving forwards