The reversible polydisperse Parking Lot Model

We use a new version of the reversible Parking Lot Model to study the compaction of vibrated polydisperse media. The particle sizes are distributed according to a truncated power law. We introduce a self-consistent desorption mechanism with a hierarchical initialization of the system. In this way, we approach densities close to unity. The final density depends on the polydispersity of the system as well as on the initialization and will reach a maximum value for a certain exponent in the power law.Comment: 7 pages, Latex, 12 figure

Factors associated with recovery from paraplegia in dogs with loss of pain perception in the pelvic limbs following intervertebral disk herniation

Abstract OBJECTIVE To investigate associations between recovery of locomotion and putative prognostic factors in dogs with loss of deep pain perception in the pelvic limbs caused by intervertebral disk herniation (IVDH). DESIGN Prospective cohort study. ANIMALS 78 client-owned dogs evaluated for IVDH that underwent spinal decompression surgery. PROCEDURES Dogs with complete loss of deep pain perception in the pelvic limbs and tail underwent routine examinations, advanced imaging, and spinal decompression surgery in accordance with standards of practice and owner consent. For each dog, information was prospectively collected on duration of clinical signs prior to onset of paraplegia; delay between onset of paraplegia and initial referral evaluation; date of recovery of locomotion, death, or euthanasia (3-month follow-up period); and whether dogs had received corticosteroid drugs before surgery. Severity of spinal cord compression at the lesion epicenter was measured via CT or MRI. RESULTS 45 of 78 (58%) of dogs recovered the ability to ambulate independently within 3 months after spinal decompression surgery. No evidence of prognostic value was identified for any of the investigated factors; importantly, a greater delay between onset of paraplegia and referral evaluation was not associated with a poorer prognosis. CONCLUSIONS AND CLINICAL RELEVANCE In this group of dogs with IVDH, immediacy of surgical treatment had no apparent association with outcome. The prognosis for recovery may instead be strongly influenced by the precise nature of the initiating injury.</jats:p

Predicting enhanced absorption of light gases in polyethylene using simplified PC-SAFT and SAFT-VR

International audienceAbsorption of light gases in polyethylene (PE) is studied using two versions of the Statistical Associating Fluid Theory (SAFT): SAFT for chain molecules with attractive potentials of variable range (VR) and simplified perturbed-chain (PC) SAFT. Emphasis is placed on the light gases typically present during ethylene polymerisation in the gas-phase reactor (GPR) process. The two approaches are validated using experimental binary-mixture data for gas absorbed in PE, and predictions are made for mixtures of more components. For most cases studied both SAFT versions perform equally well. For the case of ternary mixtures of two gases with PE, it is predicted that the less-volatile of the two gases acts to enhance the absorption of the more-volatile gas, while the more-volatile gas inhibits the absorption of the less-volatile gas. This general behaviour is also predicted in mixtures containing more gases, such as typical reactor mixtures. The magnitude of the effect may vary considerably, depending on the relative proximity of the gas-mixture saturation pressure to the reactor pressure; for example it is predicted that the absorption of ethylene may be approximately doubled if diluent gases, propane or nitrogen, are partially or completely replaced by less-volatile butane or pentane for a reactor pressure similar to 2 MPa. In the case of a co-polymerisation reaction, it is predicted that increases in absorption of both co-monomers may be obtained in roughly equal proportion. Our findings cast light on the so-called co-monomer effect, in which substantial increases in the rate of ethylene polymerisation are observed in the presence of hexene co-monomer, while suggesting that the effect is more general and not restricted to co-monomer. For example, similar rate increases may be expected in the presence of, e.g., pentane instead of hexene, but without the change in the branch structure of the produced polymer that is inevitable when the amount of co-monomer is increased

Towards 3D printed multifunctional immobilization for proton therapy: initial materials characterization

Purpose: 3D printing technology is investigated for the purpose of patient immobilization during proton therapy. It potentially enables a merge of patient immobilization, bolus range shifting, and other functions into one single patient-speci c structure. In this rst step, a set of 3D printed materials is characterized in detail, in terms of structural and radiological properties, elemental composition, directional dependence, and structural changes induced by radiation damage. These data will serve as inputs for the design of 3D printed immobilization structure prototypes. Methods: Using four di erent 3D printing techniques, in total eight materials were subjected to testing. Samples with a nominal dimension of 20×20×80 mm3 were 3D printed. The geometrical printing accuracy of each test sample was measured with a dial gage. To assess the mechanical response of the samples, standardized compression tests were performed to determine the Young’s modulus. To investigate the e ect of radiation on the mechanical response, the mechanical tests were performed both prior and after the administration of clinically relevant dose levels (70 Gy), multiplied with a safety factor of 1.4. Dual energy computed tomography (DECT) methods were used to calculate the relative electron density to water ρe, the e ective atomic number Ze , and the proton stopping power ratio (SPR) to water SPR. In order to validate the DECT based calculation of radiological properties, beam measurements were performed on the 3D printed samples as well. Photon irradiations were performed to measure the photon linear attenuation coe cients, while proton irradiations were performed to measure the proton range shift of the samples. The direc- tional dependence of these properties was investigated by performing the irradiations for di erent orientations of the samples. Results: The printed test objects showed reduced geometric printing accuracy for 2 materials (deviation > 0.25 mm). Compression tests yielded Young’s moduli ranging from 0.6 to 2940 MPa. No deterioration in the mechanical response was observed after exposure of the samples to 100 Gy in a therapeutic MV photon beam. The DECT-based characterization yielded Ze ranging from 5.91 to 10.43. The SPR and ρe both ranged from 0.6 to 1.22. The measured photon attenuation coe cients at clinical energies scaled linearly with ρe. Good agreement was seen between the DECT estimated SPR and the measured range shift, except for the higher Ze . As opposed to the photon attenuation, the proton range shifting appeared to be printing orientation dependent for certain materials. Conclusions: In this study, the rst step toward 3D printed, multifunctional immobilization was performed, by going through a candidate clinical work ow for the rst time: from the material printing to DECT characterization with a veri cation through beam measurements. Besides a proof of concept for beam modi cation, the mechanical response of printed materials was also investigated to assess their capabilities for positioning functionality. For the studied set of printing techniques and materials, a wide variety of mechanical and radiological properties can be selected from for the intended purpose. Moreover the elaborated hybrid DECT methods aid in performing in-house quality assurance of 3D printed components, as these methods enable the estimation of the radiological properties relevant for use in radiation therapy

Glassy systems under time-dependent driving forces: application to slow granular rheology

We study the dynamics of a glassy model with infinite range interactions externally driven by an oscillatory force. We find a well-defined transition in the (Temperature-Amplitude-Frequency) phase diagram between (i) a `glassy' state characterized by the slow relaxation of one-time quantities, aging in two-time quantities and a modification of the equilibrium fluctuation-dissipation relation; and (ii) a `liquid' state with a finite relaxation time. In the glassy phase, the degrees of freedom governing the slow relaxation are thermalized to an effective temperature. Using Monte-Carlo simulations, we investigate the effect of trapping regions in phase space on the driven dynamics. We find that it alternates between periods of rapid motion and periods of trapping. These results confirm the strong analogies between the slow granular rheology and the dynamics of glasses. They also provide a theoretical underpinning to earlier attempts to present a thermodynamic description of moderately driven granular materials.Comment: Version accepted for publication - Physical Review

Degenerative encephalopathy in Nova Scotia Duck Tolling Retrievers presenting with a rapid eye movement sleep behavior disorder

BACKGROUND: Neurodegenerative diseases are a heterogeneous group of disorders characterized by loss of neurons and are commonly associated with a genetic mutation. HYPOTHESIS/OBJECTIVES: To characterize the clinical and histopathological features of a novel degenerative neurological disease affecting the brain of young adult Nova Scotia Duck Tolling Retrievers (NSDTRs). ANIMALS: Nine, young adult, related NSDTRs were evaluated for neurological dysfunction and rapid eye movement sleep behavior disorder. METHODS: Case series review. RESULTS: Clinical signs of neurological dysfunction began between 2 months and 5 years of age and were progressive in nature. They were characterized by episodes of marked movements during sleep, increased anxiety, noise phobia, and gait abnormalities. Magnetic resonance imaging documented symmetrical, progressively increasing, T2‐weighted image intensity, predominantly within the caudate nuclei, consistent with necrosis secondary to gray matter degeneration. Abnormalities were not detected on clinicopathological analysis of blood and cerebrospinal fluid, infectious disease screening or urine metabolite screening in most cases. Postmortem examination of brain tissue identified symmetrical malacia of the caudate nuclei and axonal dystrophy within the brainstem and spinal cord. Genealogical analysis supports an autosomal recessive mode of inheritance. CONCLUSIONS AND CLINICAL IMPORTANCE: A degenerative encephalopathy was identified in young adult NSDTRs consistent with a hereditary disease. The prognosis is guarded due to the progressive nature of the disease, which is minimally responsive to empirical treatment

The personal experience of parenting a child with Juvenile Huntington’s Disease: perceptions across Europe

The study reported here presents a detailed description of what it is like to parent a child with juvenile Huntington’s disease in families across four European countries. Its primary aim was to develop and extend findings from a previous UK study. The study recruited parents from four European countries: Holland, Italy, Poland and Sweden,. A secondary aim was to see the extent to which the findings from the UK study were repeated across Europe and the degree of commonality or divergence across the different countries. Fourteen parents who were the primary caregiver took part in a semistructured interview. These were analyzed using an established qualitative methodology, interpretative phenomenological analysis. Five analytic themes were derived from the analysis: the early signs of something wrong; parental understanding of juvenile Huntington’s disease; living with the disease; other people’s knowledge and understanding; and need for support. These are discussed in light of the considerable convergence between the experiences of families in the United Kingdom and elsewhere in Europe

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

Combined search for the quarks of a sequential fourth generation

Results are presented from a search for a fourth generation of quarks produced singly or in pairs in a data set corresponding to an integrated luminosity of 5 inverse femtobarns recorded by the CMS experiment at the LHC in 2011. A novel strategy has been developed for a combined search for quarks of the up and down type in decay channels with at least one isolated muon or electron. Limits on the mass of the fourth-generation quarks and the relevant Cabibbo-Kobayashi-Maskawa matrix elements are derived in the context of a simple extension of the standard model with a sequential fourth generation of fermions. The existence of mass-degenerate fourth-generation quarks with masses below 685 GeV is excluded at 95% confidence level for minimal off-diagonal mixing between the third- and the fourth-generation quarks. With a mass difference of 25 GeV between the quark masses, the obtained limit on the masses of the fourth-generation quarks shifts by about +/- 20 GeV. These results significantly reduce the allowed parameter space for a fourth generation of fermions.Comment: Replaced with published version. Added journal reference and DO