The influence of artificial weathering and treatment with FE–DBD plasma in atmospheric conditions on wettability of wood surfaces

The treatment of wood surfaces with plasma in atmospheric conditions is a well–known and researched processing technique. In this study, we introduce a new approach of wood surface treatment using a floating electrode dielectric barrier discharge (FE–DBD) plasma. The main principle of this kind of plasma is that wood represents an object for charge storage and the potential of the electrodes is changing according to the surround-ings in the moment of voltage supply from high voltage source. The appearance of the discharge electric fields was firstly simulated with computer software and later analysed in real conditions. Additionally, plasma was characterised by optical emission spectros-copy as elemental analysis of the discharge. The designed FE–DBD technique was ap-plied to some extent artificially weathered common beech (Fagus sylvatica L.) and Nor-way spruce (Picea abies (L.) Karst.) wood surfaces, in order to their re–activation and improvement of their wettability by commercial water-based coating. The results showed that contact angles of the droplets of applied liquids and waterborne coating decreased with weathering time, as well as after performed plasma treatment process

The spatial distribution of HO2in an atmospheric pressure plasma jet investigated by cavity ring-down spectroscopy

Cold atmospheric pressure plasma jets make important contributions to a range of fields, such as materials processing and plasma medicine. In order to optimise the effect of those plasma sources, a detailed understanding of the chemical reaction networks is pivotal. However, the small diameter of plasma jets makes diagnostics challenging. A promising approach to obtain absolute number densities is the utilisation of cavity-enhanced absorption spectroscopy methods, by which line-of-sight averaged densities are determined. Here, we present first measurements on how the spatial distribution of HO2 in the effluent of a cold atmospheric pressure plasma jet can be obtained by cavity ring-down spectroscopy in an efficient way. Instead of recording fully wavelength resolved spectra, we will demonstrate that it is sufficient to measure the absorption coefficient at two wavelengths, corresponding to the laser being on and off the molecular resonance. By sampling the effluent from the 1.6 mm diameter nozzle in the radial direction at various axial positions, we determined that the distances over which the HO2 density was distributed were (3.9 ± 0.5) mm and (6.7 ± 0.1) mm at a distance of 2 mm and 10 mm below the nozzle of the plasma jet, respectively. We performed an Abel inversion in order to obtain the spatial distribution of HO2 that is presented along the symmetry axis of the effluent. Based on that localised density, which was (4.8 ± 0.6) ⋅ 1014 cm-3 at the maximum, we will discuss the importance of the plasma zone for the production of HO2

Plasma-wall interaction studies within the EUROfusion consortium: Progress on plasma-facing components development and qualification

This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission.The provision of a particle and power exhaust solution which is compatible with first-wall components and edge-plasma conditions is a key area of present-day fusion research and mandatory for a successful operation of ITER and DEMO. The work package plasma-facing components (WP PFC) within the European fusion programme complements with laboratory experiments, i.e. in linear plasma devices, electron and ion beam loading facilities, the studies performed in toroidally confined magnetic devices, such as JET, ASDEX Upgrade, WEST etc. The connection of both groups is done via common physics and engineering studies, including the qualification and specification of plasma-facing components, and by modelling codes that simulate edge-plasma conditions and the plasma-material interaction as well as the study of fundamental processes. WP PFC addresses these critical points in order to ensure reliable and efficient use of conventional, solid PFCs in ITER (Be and W) and DEMO (W and steel) with respect to heat-load capabilities (transient and steady-state heat and particle loads), lifetime estimates (erosion, material mixing and surface morphology), and safety aspects (fuel retention, fuel removal, material migration and dust formation) particularly for quasi-steady-state conditions. Alternative scenarios and concepts (liquid Sn or Li as PFCs) for DEMO are developed and tested in the event that the conventional solution turns out to not be functional. Here, we present an overview of the activities with an emphasis on a few key results: (i) the observed synergistic effects in particle and heat loading of ITER-grade W with the available set of exposition devices on material properties such as roughness, ductility and microstructure; (ii) the progress in understanding of fuel retention, diffusion and outgassing in different W-based materials, including the impact of damage and impurities like N; and (iii), the preferential sputtering of Fe in EUROFER steel providing an in situ W surface and a potential first-wall solution for DEMO.European Commission; Consortium for Ocean Leadership 633053; Institute of Solid State Physics, University of Latvia as the Center of Excellence has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017-TeamingPhase2 under grant agreement No. 739508, project CAMART

Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution

Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n  =  2 RMP maintaining good confinement ${{H}_{\text{H}\left(98,\text{y}2\right)}}\approx 0.95$ . Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes

Real-time plasma state monitoring and supervisory control on TCV

In ITER and DEMO, various control objectives related to plasma control must be simultaneously achieved by the plasma control system (PCS), in both normal operation as well as off-normal conditions. The PCS must act on off-normal events and deviations from the target scenario, since certain sequences (chains) of events can precede disruptions. It is important that these decisions are made while maintaining a coherent prioritization between the real-time control tasks to ensure high-performance operation. In this paper, a generic architecture for task-based integrated plasma control is proposed. The architecture is characterized by the separation of state estimation, event detection, decisions and task execution among different algorithms, with standardized signal interfaces. Central to the architecture are a plasma state monitor and supervisory controller. In the plasma state monitor, discrete events in the continuous-valued plasma state are modeled using finite state machines. This provides a high-level representation of the plasma state. The supervisory controller coordinates the execution of multiple plasma control tasks by assigning task priorities, based on the finite states of the plasma and the pulse schedule. These algorithms were implemented on the TCV digital control system and integrated with actuator resource management and existing state estimation algorithms and controllers. The plasma state monitor on TCV can track a multitude of plasma events, related to plasma current, rotating and locked neoclassical tearing modes, and position displacements. In TCV experiments on simultaneous control of plasma pressure, safety factor profile and NTMs using electron cyclotron heating (ECH) and current drive (ECCD), the supervisory controller assigns priorities to the relevant control tasks. The tasks are then executed by feedback controllers and actuator allocation management. This work forms a significant step forward in the ongoing integration of control capabilities in experiments on TCV, in support of tokamak reactor operation

Transition from E to H mode in inductively coupled oxygen plasma: Hysteresis and the behaviour of oxygen atom density

Transitions from E to H mode in electrodeless discharges created in pure oxygen at pressures from 10 Pa to 160 Pa are studied. An RF coil is placed at the centre of a long quartz tube and connected to an RF generator via a matching network. The generator operates at a frequency of 13.56 MHz and adjustable power up to 1200 W. The voltage and current on the coil are measured with a commercial voltage probe and a current probe connected to an oscilloscope, while the density of neutral O-atoms is measured with a catalytic probe. The results show the appearance of current and voltage hysteresis at moderately low pressure, the hysteresis being more pronounced at higher pressure. The O-atom density does not depend much on the mode at low pressure. As the pressure increases, a rapid increase of the O-atom density is observed at the transition between the E and the H mode. The hysteresis in the O-atom density is observed as well

Formation and reduction of thin oxide films on a stainless steel surface upon subsequent treatments with oxygen and hydrogen plasma

International audienc

Multiple vs. single harmonics AC-driven atmospheric plasma jet

In this paper, we report a comparison between the most commonly used single harmonics (sine voltage waveform) and the original multiple harmonics AC-driven atmospheric-pressure plasma jet. The designed multiple harmonics source was applied to a single-electrode plasma jet. In this research, we characterized and studied the advantages of a single-electrode jet which was powered with multiple harmonics voltage waves, fundamental frequency was varied between 5 and 60 kHz. Optical emission spectroscopy, electric probes and plasma jet visible length measurements lead to the conclusion that the optical emission intensity of emitting plasma species correlates with the discharge current RMS (Root Mean Square), whereas the jet visible length correlates with the electrode discharge voltage amplitude. These properties of the plasma jet cannot be obtained with single harmonics AC-driven plasma jets