Advanced Optics Experiments Using Nonuniform Aperture Functions

A method to create instructive, nonuniform aperture functions using spatial frequency filtering is described. The diffraction from a single slit in the Fresnel limit and the interference from a double slit in the Fraunhofer limit are spatially filtered to create electric field distributions across an aperture to produce apodization, inverse apodization or super-resolution, and apertures with phase shifts across their widths. The diffraction effects from these aperture functions are measured and calculated. The excellent agreement between the experimental results and the calculated results makes the experiment ideal for use in an advanced undergraduate or graduate optics laboratory to illustrate experimentally several effects in Fourier optics

Evaluation of Steel Bridges, Volumes I & II

This report is divided into two volumes. Volume I summarizes a structural health monitoring (SHM) system that was developed for the Iowa DOT to remotely and continuously monitor fatigue critical bridges (FCB) to aid in the detection of crack formation. The developed FCB SHM system enables bridge owners to remotely monitor FCB for gradual or sudden damage formation. The SHM system utilizes fiber bragg grating (FBG) fiber optic sensors (FOSs) to measure strains at critical locations. The strain-based SHM system is trained with measured performance data to identify typical bridge response when subjected to ambient traffic loads, and that knowledge is used to evaluate newly collected data. At specified intervals, the SHM system autonomously generates evaluation reports that summarize the current behavior of the bridge. The evaluation reports are collected and distributed to the bridge owner for interpretation and decision making. This volume (Volume II) summarizes the development and demonstration of an autonomous, continuous SHM system that can be used to monitor typical girder bridges. The developed SHM system can be grouped into two main categories: an office component and a field component. The office component is a structural analysis software program that can be used to generate thresholds which are used for identifying isolated events. The field component includes hardware and field monitoring software which performs data processing and evaluation. The hardware system consists of sensors, data acquisition equipment, and a communication system backbone. The field monitoring software has been developed such that, once started, it will operate autonomously with minimal user interaction. In general, the SHM system features two key uses. First, the system can be integrated into an active bridge management system that tracks usage and structural changes. Second, the system helps owners to identify damage and deterioration

The Yin and Yang of Tyrosine Kinase inhibition During experimental Polymicrobial sepsis

Neutrophils are the first cells of our immune system to arrive at the site of inflammation. They release cytokines, e.g., chemokines, to attract further immune cells, but also actively start to phagocytose and kill pathogens. In the case of sepsis, this tightly regulated host defense mechanism can become uncontrolled and hyperactive resulting in severe organ damage. Currently, no effective therapy is available to fight sepsis; therefore, novel treatment targets that could prevent excessive inflammatory responses are warranted. Src Family tyrosine Kinases (SFK), a group of tyrosine kinases, have been shown to play a major role in regulating immune cell recruitment and host defense. Leukocytes with SFK depletion display severe spreading and migration defects along with reduced cytokine production. Thus, we investigated the effects of dasatinib, a tyrosine kinase inhibitor, with a strong inhibitory capacity on SFKs during sterile inflammation and polymicrobial sepsis in mice. We found that dasatinib-treated mice displayed diminished leukocyte adhesion and extravasation in tumor necrosis factor-alpha-stimulated cremaster muscle venules in vivo. In polymicrobial sepsis, sepsis severity, organ damage, and clinical outcome improved in a dose-dependent fashion pointing toward an optimal therapeutic window for dasatinib dosage during polymicrobial sepsis. Dasatinib treatment may, therefore, provide a balanced immune response by preventing an overshooting inflammatory reaction on the one side and bacterial overgrowth on the other side

Age and geochemistry of the Charlestown Group, Ireland:Implications for the Grampian orogeny, its mineral potential and the Ordovician timescale

Accurately reconstructing the growth of continental margins during episodes of ocean closure has important implications for understanding the formation, preservation and location of mineral deposits in ancient orogens. The Charlestown Group of county Mayo, Ireland, forms an important yet understudied link in the Caledonian-Appalachian orogenic belt located between the well documented sectors of western Ireland and Northern Ireland. We have reassessed its role in the Ordovician Grampian orogeny, based on new fieldwork, high-resolution airborne geophysics, graptolite biostratigraphy, U–Pb zircon dating, whole rock geochemistry, and an examination of historic drillcore from across the volcanic inlier. The Charlestown Group can be divided into three formations: Horan, Carracastle, and Tawnyinah. The Horan Formation comprises a mixed sequence of tholeiitic to calc-alkaline basalt, crystal tuff and sedimentary rocks (e.g. black shale, chert), forming within an evolving peri-Laurentian affinity island arc. The presence of graptolites Pseudisograptus of the manubriatus group and the discovery of Exigraptus uniformis and Skiagraptus gnomonicus favour a latest Dapingian (i.e. Yapeenian Ya 2/late Arenig) age for the Horan Formation (equivalent to c. 471.2–470.5 Ma according to the timescale of Sadler et al., 2009). Together with three new U–Pb zircon ages of 471.95–470.82 Ma from enclosing felsic tuffs and volcanic breccias, this fauna provides an important new constraint for calibrating the Middle Ordovician timescale. Overlying deposits of the Carracastle and Tawnyinah formations are dominated by LILE- and LREE-enriched calc-alkaline andesitic tuffs and flows, coarse volcanic breccias and quartz-feldspar porphyritic intrusive rocks, overlain by more silicic tuffs and volcanic breccias with rare occurrences of sedimentary rocks. The relatively young age for the Charlestown Group in the Grampian orogeny, coupled with high Th/Yb and zircon inheritance (c. 2.7 Ga) in intrusive rocks indicate that the arc was founded upon continental crust (either composite Laurentian margin or microcontinental block). Regional correlation is best fitted to an association with the post-subduction flip volcanic/intrusive rocks of the Irish Caledonides, specifically the late-stage development of the Tyrone Igneous Complex, intrusive rocks of Connemara (western Ireland) and the Slishwood Division (Co. Sligo). Examination of breccia textures and mineralization across the volcanic inlier questions the previous porphyry hypothesis for the genesis of the Charlestown Cu deposit, which are more consistent with a volcanogenic massive sulfide (VMS) deposit.</p

An investigation on the evolution of granule formation by in-process sampling of a high shear granulator

Understanding the growth mechanisms in granulation process is an important topic, providing valuable insights and supports control strategies. Typically, observations in high shear granulators are made after stopping the process. In this work, an in-process sampling technique is described and applied to a high shear wet granulation process. Different samples can be collected over the cause of the high shear granulation process. This allowed observation of the evolution of granules during addition of water at a constant flowrate. For a typical pharmaceutical formulation, we observed that granules nucleate in the first 2 minutes after water addition starts and then grows in size and strength to an average size of 200–1200 μm at 12.5 minutes, corresponding to a sharp increase in torque. Longer water addition times lead to oversized granules and eventually a paste and highly fluctuating torque. Sampling was continued after stopping water addition which showed with time larger formed granules smoothen, whilst the smaller weaker ones disintegrate. The work shows the in-process sampling can facilitate the identification of the required binder quantity in high shear granulation

Optimizing the two-step floating catchment area method for measuring spatial accessibility to medical clinics in Montreal

<p>Abstract</p> <p>Background</p> <p>Reducing spatial access disparities to healthcare services is a growing priority for healthcare planners especially among developed countries with aging populations. There is thus a pressing need to determine which populations do not enjoy access to healthcare, yet efforts to quantify such disparities in spatial accessibility have been hampered by a lack of satisfactory measurements and methods. This study compares an optimised and the conventional version of the two-step floating catchment area (2SFCA) method to assess spatial accessibility to medical clinics in Montreal.</p> <p>Methods</p> <p>We first computed catchments around existing medical clinics of Montreal Island based on the shortest network distance. Population nested in dissemination areas were used to determine potential users of a given medical clinic. To optimize the method, medical clinics (supply) were weighted by the number of physicians working in each clinic, while the previous year's medical clinic users were computed by ten years age group was used as weighting coefficient for potential users of each medical clinic (demand).</p> <p>Results</p> <p>The spatial accessibility score (SA) increased considerably with the optimisation method. Within a distance of 1 Km, for instance, the maximum clinic accessible for 1,000 persons is 2.4 when the conventional method is used, compared with 27.7 for the optimized method. The t-test indicates a significant difference between the conventional and the optimized 2SFCA methods. Also, results of the differences between the two methods reveal a clustering of residuals when distance increases. In other words, a low threshold would be associated with a lack of precision.</p> <p>Conclusion</p> <p>Results of this study suggest that a greater effort must be made ameliorate spatial accessibility to medical clinics in Montreal. To ensure that health resources are allocated in the interest of the population, health planners and the government should consider a strategy in the sitting of future clinics which would provide spatial access to the greatest number of people.</p

Local deprivation and the labour market integration of new migrants to England

Using data on new migrants to England from the Quarterly Labour Force Survey, we show how a key component of migrant integration - labour market progress in terms of wages and unemployment rates - is broadly positive in the early years after arrival across a range of migrant groups and across gender. However the precise level of labour market success achieved varies considerably across groups reflecting both the initial entry level and labour market trajectories after migration. Migrants from Western Europe and the Old Commonwealth countries have unemployment rates (wages) which are generally lower (higher) than other groups, particularly non-white groups, while migrants from the Accession countries experience relatively low unemployment but also low wages. Groups which have better outcomes on entry also tend to experience higher rates of progress over time in England. However, the extent of multiple deprivation in the local authority where migrants reside interacts with years since migration to dampen wage trajectories for some groups and accounting for deprivation highlights the importance of internal migration for access to employment. The results emphasise structural explanations for patterns of labour market integration of new migrants to England

The role of organisms in hyporheic processes : gaps in current knowledge, needs for future research and applications

Fifty years after the hyporheic zone was first defined (Orghidan, 1959), there are still gaps in the knowledge regarding the role of biodiversity in hyporheic processes. First, some methodological questions remained unanswered regarding the interactions between biodiversity and physical processes, both for the study of habitat characteristics and interactions at different scales. Furthermore, many questions remain to be addressed to help inform our understanding of invertebrate community dynamics, especially regarding the trophic niches of organisms, the functional groups present within sediment, and their temporal changes. Understanding microbial community dynamics would require investigations about their relationship with the physical characteristics of the sediment, their diversity, their relationship with metabolic pathways, their inter- actions with invertebrates, and their response to environmental stress. Another fundamental research question is that of the importance of the hyporheic zone in the global metabolism of the river, which must be explored in relation to organic matter recycling, the effects of disturbances, and the degradation of contaminants. Finally, the application of this knowledge requires the development of methods for the estimation of hydro- logical exchanges, especially for the management of sediment clogging, the optimization of self-purification, and the integration of climate change in environmental policies. The development of descriptors of hyporheic zone health and of new metrology is also crucial to include specific targets in water policies for the long-term management of the system and a clear evaluation of restoration strategies