Impact of metals on corrosive behavior of biodiesel-diesel- ethanol(BDE) alternative fuel

Corrosive behavior of biodieseledieseleethanol (BDE) fuel blends upon exposure to metals, namely, mild steel, copper and aluminum was studied by static immersion at room temperature and 60 �C. The change of fuel properties, i.e., total acid number, density, viscosity, calorific value, flash point, and color changes were investigated. Moreover, fuel compositional changes, such as water content, oxidation product level, and metal elements in the fuel blends were examined. Finally, the effect of fuel blends on corrosion rate (CR), morphology of corrosion products, and chemical structure of metals were studied. Results revealed that the CR of metals in BDE fuels is in the order: aluminum < mild steel < copper at both temperature conditions. The degradation of fuel properties and corrosion rate of metals in BDE fuel blends are lower than neat biodiesel (B100), whereas higher than petroediesel (B0). Corrosiveness of B20D75E5 is lower than B20D70E10 upon exposure to metals

Compatibility of Elastomers in Biodiesel-diesel-bioethanol Blend (BDE)

The present study aims to investigate the impact of biodiesel-diesel-bioethanol (BDE) blended fuel on the degradation behavior of elastomers such as nitrile rubber (NBR) and polytetrafluroethylene (PTFE). Static immersion test in B20D75E5 blends (20% biodiesel, 75% diesel and 5% bioethanol) at 50°C for 200 h was carried out. At the end of immersion test, degradation behaviour of elastomers was investigated by measuring mass, volume and hardness. The exposed surface of elastomers was studied using optical microscope (OM). Fourier Transform Infrared (FTIR) spectroscopy was carried out to identify the chemical and structural changes in the elastomers. Moreover, physical and chemical characteristics of the fuel blend after the immersion test such as total acid number (TAN), density and colour change were also investigated. Results showed that the degradation of NBR was high compared to PTFE

Investigation of the peroxide value of oils used in bistros (West of Iran)

Abstract Frying food is one of the most admired methods to make instant cuisine among people because of its taste and color, as well as the crispy texture creation. Hydrogen peroxide which is the result of frying, causes various diseases, including cancer, atherosclerosis, cardiac and cerebral ischemia, aging and liver disorders. Therefore, this study aims to investigate the amount of peroxide in the oils used in bistros in western Iran. This descriptive cross-sectional study carried out in the restaurants in western Iran. In this study, 81 samples of consumable oils gathered according to the standard of 493 Iranian Institute of Standards and Industrial Research. After transferring the samples to the laboratory, there peroxide value was measured according to the standard number 4179 and data was entered in Excel and SPSS version 16 for further analyses. Out of 81 samples, 59% (48 samples) from consumable samples at the standard level and 41% (33 samples) of the non-consumable samples higher than the standard rate of the Institute of Standards and Industrial Research of Iran. While cooking, the consumable oil average peroxide value was 5.72, without a night and day breakdown (in general). In addition, the lowest and highest peroxide oxidation was 0 and 29 mEq/kg. According to Mann-Whitney test, there was no significant difference between the amounts of peroxide in consumable oils. Some evidence shows the non-compliance with hygiene issues that are related to oil consumption. This requires more supervision and continuous sampling and testing. © 2018, Advanced Scientific Research. All rights reserved

Measurement of jet suppression in central Pb-Pb collisions at root s(NN)=2.76 TeV

The transverse momentum(p(T)) spectrum and nuclear modification factor (R-AA) of reconstructed jets in 0-10% and 10-30% central Pb-Pb collisions at root s(NN) = 2.76 TeV were measured. Jets were reconstructed using the anti-k(T) jet algorithm with a resolution parameter of R = 0.2 from charged and neutral particles, utilizing the ALICE tracking detectors and Electromagnetic Calorimeter (EMCal). The jet p(T) spectra are reported in the pseudorapidity interval of \eta(jet)\ 5 GeV/c to suppress jets constructed from the combinatorial background in Pb-Pb collisions. The leading charged particle requirement applied to jet spectra both in pp and Pb-Pb collisions had a negligible effect on the R-AA. The nuclear modification factor R-AA was found to be 0.28 +/- 0.04 in 0-10% and 0.35 +/- 0.04 in 10-30% collisions, independent of p(T), jet within the uncertainties of the measurement. The observed suppression is in fair agreement with expectations from two model calculations with different approaches to jet quenching. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V.Peer reviewe

Centrality dependence of inclusive J/\u3c8 production in p-Pb collisions at 1asNN = 5.02 TeV

We present a measurement of inclusive J/\u3c8 production in p-Pb collisions at 1asNN = 5.02TeV as a function of the centrality of the collision, as estimated from the energy deposited in the Zero Degree Calorimeters. The measurement is performed with the ALICE detector down to zero transverse momentum, pT, in the backward ( 124.46 < ycms < 122.96) and forward (2.03 < ycms < 3.53) rapidity intervals in the dimuon decay channel and in the mid-rapidity region ( 121.37 < ycms < 0.43) in the dielectron decay channel. The backward and forward rapidity intervals correspond to the Pb-going and p-going direction, respectively. The pT-differential J/\u3c8 production cross section at backward and forward rapidity is measured for several centrality classes, together with the corresponding average pT and pT2 values. The nuclear modification factor is presented as a function of centrality for the three rapidity intervals, and as a function of pT for several centrality classes at backward and forward rapidity. At mid- and forward rapidity, the J/\u3c8 yield is suppressed up to 40% compared to that in pp interactions scaled by the number of binary collisions. The degree of suppression increases towards central p-Pb collisions at forward rapidity, and with decreasing pT of the J/\u3c8. At backward rapidity, the nuclear modification factor is compatible with unity within the total uncertainties, with an increasing trend from peripheral to central p-Pb collisions

Centrality dependence of high-pT D meson suppression in Pb-Pb collisions at 1asNN = 2.76 TeV

The nuclear modification factor, RAA, of the prompt charmed mesons D0, D+ and D 17+, and their antiparticles, was measured with the ALICE detector in Pb-Pb collisions at a centre-of-mass energy 1asNN = 2.76 TeV in two transverse momentum intervals, 5 < pT < 8GeV/c and 8 < pT < 16GeV/c, and in six collision centrality classes. The RAA shows a maximum suppression of a factor of 5\u20136 in the 10% most central collisions. The suppression and its centrality dependence are compatible within uncertainties with those of charged pions. A comparison with the RAA of non-prompt J/\u3c8 from B meson decays, measured by the CMS Collaboration, hints at a larger suppression of D mesons in the most central collisions

J/psi production as a function of charged-particle pseudorapidity density in p-Pb collisions at root s(NN)=5.02 TeV

We report measurements of the inclusive J/ψ yield and average transverse momentum as a function of charged-particle pseudorapidity density dNch/dη in p–Pb collisions at sNN=5.02TeV with ALICE at the LHC. The observables are normalised to their corresponding averages in non-single diffractive events. An increase of the normalised J/ψ yield with normalised dNch/dη, measured at mid-rapidity, is observed at mid-rapidity and backward rapidity. At forward rapidity, a saturation of the relative yield is observed for high charged-particle multiplicities. The normalised average transverse momentum at forward and backward rapidities increases with multiplicity at low multiplicities and saturates beyond moderate multiplicities. In addition, the forward-to-backward nuclear modification factor ratio is also reported, showing an increasing suppression of J/ψ production at forward rapidity with respect to backward rapidity for increasing charged-particle multiplicity

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Estimates of global, regional, and national incidence, prevalence, and mortality of HIV, 1980�2015: the Global Burden of Disease Study 2015

Background Timely assessment of the burden of HIV/AIDS is essential for policy setting and programme evaluation. In this report from the Global Burden of Disease Study 2015 (GBD 2015), we provide national estimates of levels and trends of HIV/AIDS incidence, prevalence, coverage of antiretroviral therapy (ART), and mortality for 195 countries and territories from 1980 to 2015. Methods For countries without high-quality vital registration data, we estimated prevalence and incidence with data from antenatal care clinics and population-based seroprevalence surveys, and with assumptions by age and sex on initial CD4 distribution at infection, CD4 progression rates (probability of progression from higher to lower CD4 cell-count category), on and off antiretroviral therapy (ART) mortality, and mortality from all other causes. Our estimation strategy links the GBD 2015 assessment of all-cause mortality and estimation of incidence and prevalence so that for each draw from the uncertainty distribution all assumptions used in each step are internally consistent. We estimated incidence, prevalence, and death with GBD versions of the Estimation and Projection Package (EPP) and Spectrum software originally developed by the Joint United Nations Programme on HIV/AIDS (UNAIDS). We used an open-source version of EPP and recoded Spectrum for speed, and used updated assumptions from systematic reviews of the literature and GBD demographic data. For countries with high-quality vital registration data, we developed the cohort incidence bias adjustment model to estimate HIV incidence and prevalence largely from the number of deaths caused by HIV recorded in cause-of-death statistics. We corrected these statistics for garbage coding and HIV misclassification. Findings Global HIV incidence reached its peak in 1997, at 3·3 million new infections (95 uncertainty interval UI 3·1�3·4 million). Annual incidence has stayed relatively constant at about 2·6 million per year (range 2·5�2·8 million) since 2005, after a period of fast decline between 1997 and 2005. The number of people living with HIV/AIDS has been steadily increasing and reached 38·8 million (95% UI 37·6�40·4 million) in 2015. At the same time, HIV/AIDS mortality has been declining at a steady pace, from a peak of 1·8 million deaths (95% UI 1·7�1·9 million) in 2005, to 1·2 million deaths (1·1�1·3 million) in 2015. We recorded substantial heterogeneity in the levels and trends of HIV/AIDS across countries. Although many countries have experienced decreases in HIV/AIDS mortality and in annual new infections, other countries have had slowdowns or increases in rates of change in annual new infections. Interpretation Scale-up of ART and prevention of mother-to-child transmission has been one of the great successes of global health in the past two decades. However, in the past decade, progress in reducing new infections has been slow, development assistance for health devoted to HIV has stagnated, and resources for health in low-income countries have grown slowly. Achievement of the new ambitious goals for HIV enshrined in Sustainable Development Goal 3 and the 90-90-90 UNAIDS targets will be challenging, and will need continued efforts from governments and international agencies in the next 15 years to end AIDS by 2030. Funding Bill & Melinda Gates Foundation, and National Institute of Mental Health and National Institute on Aging, National Institutes of Health. © 2016 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY licens